net: Remove the bd* parameter from net stack functions

[karo-tx-uboot.git] / board / ronetix / pm9261 / pm9261.c

diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index a2a569b0cd9ca95fabff431287f9e1ca1a7d3e5f..b96f745773128d9aa4a619deb42e24065468b7e4 100644 (file)
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -9,8 +9,9 @@
  */
 
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
@@ -73,10 +74,10 @@ static void pm9261_nand_hw_init(void)
                &pmc->pcer);
 
        /* Configure RDY/BSY */
-       at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+       gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 
        /* Enable NandFlash */
-       at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+       gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 
        at91_set_a_periph(AT91_PIO_PORTC, 0, 0);        /* NANDOE */
        at91_set_a_periph(AT91_PIO_PORTC, 1, 0);        /* NANDWE */
@@ -116,20 +117,20 @@ static void pm9261_dm9000_hw_init(void)
 
 #ifdef CONFIG_LCD
 vidinfo_t panel_info = {
-       vl_col:         240,
-       vl_row:         320,
-       vl_clk:         4965000,
-       vl_sync:        ATMEL_LCDC_INVLINE_INVERTED |
-                       ATMEL_LCDC_INVFRAME_INVERTED,
-       vl_bpix:        3,
-       vl_tft:         1,
-       vl_hsync_len:   5,
-       vl_left_margin: 1,
-       vl_right_margin:33,
-       vl_vsync_len:   1,
-       vl_upper_margin:1,
-       vl_lower_margin:0,
-       mmio:           ATMEL_BASE_LCDC,
+       .vl_col =               240,
+       .vl_row =               320,
+       .vl_clk =               4965000,
+       .vl_sync =              ATMEL_LCDC_INVLINE_INVERTED |
+                               ATMEL_LCDC_INVFRAME_INVERTED,
+       .vl_bpix =              3,
+       .vl_tft =               1,
+       .vl_hsync_len =         5,
+       .vl_left_margin =       1,
+       .vl_right_margin =      33,
+       .vl_vsync_len =         1,
+       .vl_upper_margin =      1,
+       .vl_lower_margin =      0,
+       .mmio =                 ATMEL_BASE_LCDC,
 };
 
 void lcd_enable(void)
@@ -287,7 +288,7 @@ void reset_phy(void)
         * Initialize ethernet HW addr prior to starting Linux,
         * needed for nfsroot
         */
-       eth_init(gd->bd);
+       eth_init();
 #endif
 }
 #endif