#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
#include <asm/arch/clock.h>
#include <asm/arch/clk.h>
#include <asm/arch/mipi_dsim.h>
#include <power/max8997_muic.h>
#include <power/battery.h>
#include <power/max17042_fg.h>
+#include <usb_mass_storage.h>
#include "setup.h"
int board_init(void)
{
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SPL_ARGS_ADDR;
check_hw_revision();
printf("HW Revision:\t0x%x\n", board_rev);
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
- get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) +
+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) +
+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
return 0;
}
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+ gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+ gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+ gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
}
static unsigned int get_hw_revision(void)
{
struct exynos4_gpio_part2 *gpio =
(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
- int i, err;
+ int err;
/* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
s5p_gpio_direction_output(&gpio->k0, 2, 1);
s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
- /*
- * eMMC GPIO:
- * SDR 8-bit@48MHz at MMC0
- * GPK0[0] SD_0_CLK(2)
- * GPK0[1] SD_0_CMD(2)
- * GPK0[2] SD_0_CDn -> Not used
- * GPK0[3:6] SD_0_DATA[0:3](2)
- * GPK1[3:6] SD_0_DATA[0:3](3)
- *
- * DDR 4-bit@26MHz at MMC4
- * GPK0[0] SD_4_CLK(3)
- * GPK0[1] SD_4_CMD(3)
- * GPK0[2] SD_4_CDn -> Not used
- * GPK0[3:6] SD_4_DATA[0:3](3)
- * GPK1[3:6] SD_4_DATA[4:7](4)
- */
- for (i = 0; i < 7; i++) {
- if (i == 2)
- continue;
- /* GPK0[0:6] special function 2 */
- s5p_gpio_cfg_pin(&gpio->k0, i, 0x2);
- /* GPK0[0:6] pull disable */
- s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE);
- /* GPK0[0:6] drv 4x */
- s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X);
- }
-
- for (i = 3; i < 7; i++) {
- /* GPK1[3:6] special function 3 */
- s5p_gpio_cfg_pin(&gpio->k1, i, 0x3);
- /* GPK1[3:6] pull disable */
- s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE);
- /* GPK1[3:6] drv 4x */
- s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X);
- }
-
/*
* MMC device init
* mmc0 : eMMC (8-bit buswidth)
* mmc2 : SD card (4-bit buswidth)
*/
- err = s5p_mmc_init(0, 8);
+ err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
+ if (err)
+ debug("SDMMC0 not configured\n");
+ else
+ err = s5p_mmc_init(0, 8);
/* T-flash detect */
s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
* GPX3[4] T-flash detect pin
*/
if (!s5p_gpio_get_value(&gpio->x3, 4)) {
- /*
- * SD card GPIO:
- * GPK2[0] SD_2_CLK(2)
- * GPK2[1] SD_2_CMD(2)
- * GPK2[2] SD_2_CDn -> Not used
- * GPK2[3:6] SD_2_DATA[0:3](2)
- */
- for (i = 0; i < 7; i++) {
- if (i == 2)
- continue;
- /* GPK2[0:6] special function 2 */
- s5p_gpio_cfg_pin(&gpio->k2, i, 0x2);
- /* GPK2[0:6] pull disable */
- s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE);
- /* GPK2[0:6] drv 4x */
- s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X);
- }
- err = s5p_mmc_init(2, 4);
+ err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
+ if (err)
+ debug("SDMMC2 not configured\n");
+ else
+ err = s5p_mmc_init(2, 4);
}
return err;
writel(0, (unsigned int)&pwr->lcd1_configuration);
writel(0, (unsigned int)&pwr->gps_configuration);
writel(0, (unsigned int)&pwr->gps_alive_configuration);
+
+ /* It is necessary to power down core 1 */
+ /* to successfully boot CPU1 in kernel */
+ writel(0, (unsigned int)&pwr->arm_core1_configuration);
}
static void board_uart_init(void)
return 0;
}
-static void lcd_reset(void)
+void exynos_reset_lcd(void)
{
struct exynos4_gpio_part2 *gpio2 =
(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
.vl_cmd_allow_len = 0xf,
.win_id = 3,
- .cfg_gpio = NULL,
- .backlight_on = NULL,
- .lcd_power_on = NULL, /* lcd_power_on in mipi dsi driver */
- .reset_lcd = lcd_reset,
.dual_lcd_enabled = 0,
.init_delay = 0,
setenv("lcdinfo", "lcd=s6e8ax0");
}
+
+#ifdef CONFIG_USB_GADGET_MASS_STORAGE
+static int ums_read_sector(struct ums_device *ums_dev,
+ ulong start, lbaint_t blkcnt, void *buf)
+{
+ if (ums_dev->mmc->block_dev.block_read(ums_dev->dev_num,
+ start + ums_dev->offset, blkcnt, buf) != blkcnt)
+ return -1;
+
+ return 0;
+}
+
+static int ums_write_sector(struct ums_device *ums_dev,
+ ulong start, lbaint_t blkcnt, const void *buf)
+{
+ if (ums_dev->mmc->block_dev.block_write(ums_dev->dev_num,
+ start + ums_dev->offset, blkcnt, buf) != blkcnt)
+ return -1;
+
+ return 0;
+}
+
+static void ums_get_capacity(struct ums_device *ums_dev,
+ long long int *capacity)
+{
+ long long int tmp_capacity;
+
+ tmp_capacity = (long long int) ((ums_dev->offset + ums_dev->part_size)
+ * SECTOR_SIZE);
+ *capacity = ums_dev->mmc->capacity - tmp_capacity;
+}
+
+static struct ums_board_info ums_board = {
+ .read_sector = ums_read_sector,
+ .write_sector = ums_write_sector,
+ .get_capacity = ums_get_capacity,
+ .name = "TRATS UMS disk",
+ .ums_dev = {
+ .mmc = NULL,
+ .dev_num = 0,
+ .offset = 0,
+ .part_size = 0.
+ },
+};
+
+struct ums_board_info *board_ums_init(unsigned int dev_num, unsigned int offset,
+ unsigned int part_size)
+{
+ struct mmc *mmc;
+
+ mmc = find_mmc_device(dev_num);
+ if (!mmc)
+ return NULL;
+
+ ums_board.ums_dev.mmc = mmc;
+ ums_board.ums_dev.dev_num = dev_num;
+ ums_board.ums_dev.offset = offset;
+ ums_board.ums_dev.part_size = part_size;
+
+ return &ums_board;
+}
+#endif
projects / karo-tx-uboot.git / blobdiff