sniper: Pass serial number through ATAG

[karo-tx-uboot.git] / board / sbc8641d / sbc8641d.c

diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index d954d2f6f74899c191f209248164e0887009aa9f..6bdf1a28e97bbea16eff991718df3bad378b0c98 100644 (file)
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -9,23 +9,7 @@
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -34,7 +18,8 @@
 #include <asm/processor.h>
 #include <asm/immap_86xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
 #include <libfdt.h>
 #include <fdt_support.h>
 
@@ -62,7 +47,7 @@ phys_size_t initdram (int board_type)
        dram_size = fixed_sdram ();
 #endif
 
-       puts ("    DDR: ");
+       debug ("    DDR: ");
        return dram_size;
 }
 
@@ -108,7 +93,7 @@ long int fixed_sdram (void)
 {
 #if !defined(CONFIG_SYS_RAMBOOT)
        volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-       volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
+       volatile struct ccsr_ddr *ddr = &immap->im_ddr1;
 
        ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
        ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
@@ -126,7 +111,7 @@ long int fixed_sdram (void)
        ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
        ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
        ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
-       ddr->sdram_mode_cntl = CONFIG_SYS_DDR_MODE_CTL;
+       ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL;
        ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
        ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
        ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
@@ -157,7 +142,7 @@ long int fixed_sdram (void)
        ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
        ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1;
        ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
-       ddr->sdram_mode_cntl = CONFIG_SYS_DDR2_MODE_CTL;
+       ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL;
        ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
        ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
        ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
@@ -180,80 +165,21 @@ long int fixed_sdram (void)
  * Initialize PCI Devices, report devices found.
  */
 
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_fsl86xxads_config_table[] = {
-       {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-        PCI_IDSEL_NUMBER, PCI_ANY_ID,
-        pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-                                    PCI_ENET0_MEMADDR,
-                                    PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
-       {}
-};
-#endif
-
-static struct pci_controller pcie1_hose = {
-#ifndef CONFIG_PCI_PNP
-       config_table:pci_mpc86xxcts_config_table
-#endif
-};
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_PCIE2
-static struct pci_controller pcie2_hose;
-#endif /* CONFIG_PCIE2 */
-
-int first_free_busno = 0;
-
 void pci_init_board(void)
 {
-       struct fsl_pci_info pci_info[2];
-       volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
-       volatile ccsr_gur_t *gur = &immap->im_gur;
-       uint devdisr = in_be32(&gur->devdisr);
-       uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
-               >> MPC8641_PORDEVSR_IO_SEL_SHIFT;
-       int pcie_ep;
-       int num = 0;
-
-#ifdef CONFIG_PCIE1
-       int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-
-       if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
-               SET_STD_PCIE_INFO(pci_info[num], 1);
-               pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("    PCIE1 connected as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
-               first_free_busno = fsl_pci_init_port(&pci_info[num++],
-                                       &pcie1_hose, first_free_busno);
-       } else {
-               puts("    PCIE1: disabled\n");
-       }
-#else
-       puts("    PCIE1: disabled\n");
-#endif /* CONFIG_PCIE1 */
-
-#ifdef CONFIG_PCIE2
-
-       SET_STD_PCIE_INFO(pci_info[num], 2);
-       pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-       printf("    PCIE2 connected as %s (base addr %lx)\n",
-                       pcie_ep ? "Endpoint" : "Root Complex",
-                       pci_info[num].regs);
-       first_free_busno = fsl_pci_init_port(&pci_info[num++],
-                               &pcie2_hose, first_free_busno);
-#else
-       puts("    PCIE2: disabled\n");
-#endif /* CONFIG_PCIE2 */
+       fsl_pcie_init_board(0);
 }
+#endif /* CONFIG_PCI */
 
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup (void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
 {
        ft_cpu_setup(blob, bd);
 
        FT_FSL_PCI_SETUP;
+
+       return 0;
 }
 #endif
 
@@ -333,12 +259,3 @@ void board_reset(void)
        __asm__ __volatile__ ("rfi");
 #endif
 }
-
-#ifdef CONFIG_MP
-extern void cpu_mp_lmb_reserve(struct lmb *lmb);
-
-void board_lmb_reserve(struct lmb *lmb)
-{
-       cpu_mp_lmb_reserve(lmb);
-}
-#endif