imported Freescale specific U-Boot additions for i.MX28,... release L2.6.31_10.08.01

[karo-tx-uboot.git] / board / spc1920 / spc1920.c

diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c
index 028f4c635de4825a3572d6ed76e45de785d70ef5..ee939bf2414e925a0a277e6fb61e90b550829b96 100755 (executable)
--- a/board/spc1920/spc1920.c
+++ b/board/spc1920/spc1920.c
@@ -27,9 +27,9 @@
 #include <common.h>
 #include <mpc8xx.h>
 #include "pld.h"
+#include "hpi.h"
 
 #define        _NOT_USED_      0xFFFFFFFF
-/* #define debug(fmt,args...)     printf (fmt ,##args) */
 
 static long int dram_size (long int, long int *, long int);
 
@@ -82,11 +82,11 @@ const uint sdram_table[] = {
        _NOT_USED_, _NOT_USED_, _NOT_USED_,
 };
 
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
 {
-       volatile immap_t *immr = (immap_t *) CFG_IMMR;
+       volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
        volatile memctl8xx_t *memctl = &immr->im_memctl;
-       /* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; */
+       /* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE; */
 
        long int size_b0;
        long int size8, size9;
@@ -99,19 +99,19 @@ long int initdram (int board_type)
 
        udelay(100);
 
-       memctl->memc_mptpr = CFG_MPTPR;
+       memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
        /* burst length=4, burst type=sequential, CAS latency=2 */
-       memctl->memc_mar = CFG_MAR;
+       memctl->memc_mar = CONFIG_SYS_MAR;
 
        /*
         * Map controller bank 1 to the SDRAM bank at preliminary address.
         */
-       memctl->memc_or1 = CFG_OR1_PRELIM;
-       memctl->memc_br1 = CFG_BR1_PRELIM;
+       memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+       memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
        /* initialize memory address register */
-       memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */
+       memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */
 
        /* mode initialization (offset 5) */
        udelay (200);                           /* 0x80006105 */
@@ -132,7 +132,7 @@ long int initdram (int board_type)
        /* Need at least 10 DRAM accesses to stabilize */
        for (i = 0; i < 10; ++i) {
                volatile unsigned long *addr =
-                       (volatile unsigned long *) CFG_SDRAM_BASE;
+                       (volatile unsigned long *) CONFIG_SYS_SDRAM_BASE;
                unsigned long val;
 
                val = *(addr + i);
@@ -144,22 +144,22 @@ long int initdram (int board_type)
         *
         * try 8 column mode
         */
-       size8 = dram_size (CFG_MBMR_8COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE);
+       size8 = dram_size (CONFIG_SYS_MBMR_8COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE);
 
        udelay (1000);
 
        /*
         * try 9 column mode
         */
-       size9 = dram_size (CFG_MBMR_9COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE);
+       size9 = dram_size (CONFIG_SYS_MBMR_9COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE);
 
        if (size8 < size9) {            /* leave configuration at 9 columns */
                size_b0 = size9;
-               memctl->memc_mbmr = CFG_MBMR_9COL | MBMR_PTBE;
+               memctl->memc_mbmr = CONFIG_SYS_MBMR_9COL | MBMR_PTBE;
                udelay (500);
        } else {                        /* back to 8 columns            */
                size_b0 = size8;
-               memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
+               memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE;
                udelay (500);
        }
 
@@ -169,13 +169,15 @@ long int initdram (int board_type)
 
        memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) |
                        OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
-       memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
+       memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
        udelay (1000);
 
+       /* initalize the DSP Host Port Interface */
+       hpi_init();
 
-       /* PLD Setup */
-       memctl->memc_or5 = CFG_OR5_PRELIM;
-       memctl->memc_br5 = CFG_BR5_PRELIM;
+       /* FRAM Setup */
+       memctl->memc_or4 = CONFIG_SYS_OR4;
+       memctl->memc_br4 = CONFIG_SYS_BR4;
        udelay(1000);
 
        return (size_b0);
@@ -191,7 +193,7 @@ long int initdram (int board_type)
 static long int dram_size (long int mbmr_value, long int *base,
                           long int maxsize)
 {
-       volatile immap_t *immap = (immap_t *) CFG_IMMR;
+       volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
        volatile memctl8xx_t *memctl = &immap->im_memctl;
 
        memctl->memc_mbmr = mbmr_value;
@@ -205,22 +207,40 @@ static long int dram_size (long int mbmr_value, long int *base,
 
 int board_early_init_f(void)
 {
-       volatile immap_t *immap = (immap_t *) CFG_IMMR;
+       volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
+       /* Set Go/NoGo led (PA15) to color red */
+       immap->im_ioport.iop_papar &= ~0x1;
+       immap->im_ioport.iop_paodr &= ~0x1;
+       immap->im_ioport.iop_padir |= 0x1;
+       immap->im_ioport.iop_padat |= 0x1;
 
+#if 0
        /* Turn on LED PD9 */
        immap->im_ioport.iop_pdpar &= ~(0x0040);
        immap->im_ioport.iop_pddir |= 0x0040;
        immap->im_ioport.iop_pddat |= 0x0040;
+#endif
+
+       /*
+        * Enable console on SMC1. This requires turning on
+        * the com2_en signal and SMC1_DISABLE
+        */
+
+       /* SMC1_DISABLE: PB17 */
+       immap->im_cpm.cp_pbodr &= ~0x4000;
+       immap->im_cpm.cp_pbpar &= ~0x4000;
+       immap->im_cpm.cp_pbdir |= 0x4000;
+       immap->im_cpm.cp_pbdat &= ~0x4000;
 
-       /* Enable PD10 (COM2_EN) */
+       /* COM2_EN: PD10 */
        immap->im_ioport.iop_pdpar &= ~0x0020;
        immap->im_ioport.iop_pddir &= ~0x4000;
        immap->im_ioport.iop_pddir |= 0x0020;
        immap->im_ioport.iop_pddat |= 0x0020;
 
 
-#ifdef CFG_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */
+#ifdef CONFIG_SYS_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */
        immap->im_cpm.cp_simode |= 0x7000;
        immap->im_cpm.cp_simode &= ~(0x8000);
 #endif
@@ -228,6 +248,14 @@ int board_early_init_f(void)
        return 0;
 }
 
+int last_stage_init(void)
+{
+#ifdef CONFIG_SPC1920_HPI_TEST
+       printf("CMB1920 Host Port Interface Test: %s\n",
+              hpi_test() ? "Failed!" : "OK");
+#endif
+       return 0;
+}
 
 int checkboard (void)
 {