#include <common.h>
#include <exports.h>
-#include <s3c2400.h>
+#include <timestamp.h>
+#include <asm/arch/s3c24x0_cpu.h>
#include "tsc2000.h"
#include "rs485.h"
int do_pressure (void);
int do_v_bat (void);
int do_vfd_id (void);
-int do_buzzer (char **);
-int do_led (char **);
-int do_full_bridge (char **);
-int do_dac (char **);
+int do_buzzer (char * const *);
+int do_led (char * const *);
+int do_full_bridge (char * const *);
+int do_dac (char * const *);
int do_motor_contact (void);
-int do_motor (char **);
-int do_pwm (char **);
-int do_thermo (char **);
-int do_touch (char **);
-int do_rs485 (char **);
-int do_serial_number (char **);
+int do_motor (char * const *);
+int do_pwm (char * const *);
+int do_thermo (char * const *);
+int do_touch (char * const *);
+int do_rs485 (char * const *);
+int do_serial_number (char * const *);
int do_crc16 (void);
int do_power_switch (void);
-int do_gain (char **);
-int do_eeprom (char **);
+int do_gain (char * const *);
+int do_eeprom (char * const *);
/* helper functions */
static void adc_init (void);
unsigned int icnt);
#if defined(CONFIG_CMD_I2C)
-static int trab_eeprom_read (char **argv);
-static int trab_eeprom_write (char **argv);
+static int trab_eeprom_read (char * const *argv);
+static int trab_eeprom_write (char * const *argv);
int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer,
int len);
int i2c_read_multiple ( uchar chip, uint addr, int alen, uchar *buffer,
* test.
*/
-int trab_fkt (int argc, char *argv[])
+int trab_fkt (int argc, char * const argv[])
{
int i;
return 1;
}
+void hang (void)
+{
+ puts ("### ERROR ### Please RESET the board ###\n");
+ for (;;);
+}
+
int do_info (void)
{
printf ("Stand-alone application for TRAB board function test\n");
- printf ("Built: %s at %s\n", __DATE__ , __TIME__ );
+ printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
return 0;
}
{
int j = 1000; /* timeout value for wait loop in us */
int result;
- S3C2400_ADC *padc;
+ struct s3c2400_adc *padc;
- padc = S3C2400_GetBase_ADC();
+ padc = s3c2400_get_base_adc();
channel &= 0x7;
padc->ADCCON &= ~ADC_STDBM; /* select normal mode */
static void adc_init (void)
{
- S3C2400_ADC *padc;
+ struct s3c2400_adc *padc;
- padc = S3C2400_GetBase_ADC();
+ padc = s3c2400_get_base_adc();
padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
{
int result;
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure GPE7 as input */
gpio->PECON &= ~(0x3 << (2 * 7));
int i;
long int pcup_old, pccon_old;
int vfd_board_id;
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* try to red vfd board id from the value defined by pull-ups */
return 0;
}
-int do_buzzer (char **argv)
+int do_buzzer (char * const *argv)
{
int counter;
- S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* set prescaler for timer 2, 3 and 4 */
timers->TCFG0 &= ~0xFF00;
}
-int do_led (char **argv)
+int do_led (char * const *argv)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure PC14 and PC15 as output */
gpio->PCCON &= ~(0xF << 28);
}
-int do_full_bridge (char **argv)
+int do_full_bridge (char * const *argv)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure PD5 and PD6 as output */
gpio->PDCON &= ~((0x3 << 5*2) | (0x3 << 6*2));
}
-int do_dac (char **argv)
+int do_dac (char * const *argv)
{
int brightness;
/* initialize SPI */
- spi_init ();
+ tsc2000_spi_init ();
if (((brightness = simple_strtoul (argv[2], NULL, 10)) < 0) ||
(brightness > 255)) {
return 0;
}
-int do_motor (char **argv)
+int do_motor (char * const *argv)
{
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* Configure I/O port */
gpio->PGCON &= ~(0x3 << 0);
printf ("## FKT: ");
}
-int do_pwm (char **argv)
+int do_pwm (char * const *argv)
{
int counter;
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
- S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+ struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
if (strcmp (argv[2], "on") == 0) {
/* configure pin GPD8 as TOUT3 */
}
-int do_thermo (char **argv)
+int do_thermo (char * const *argv)
{
int channel, res;
}
-int do_touch (char **argv)
+int do_touch (char * const *argv)
{
int x, y;
}
-int do_rs485 (char **argv)
+int do_rs485 (char * const *argv)
{
int timeout;
char data[RS485_MAX_RECEIVE_BUF_LEN];
}
-int do_serial_number (char **argv)
+int do_serial_number (char * const *argv)
{
#if defined(CONFIG_CMD_I2C)
unsigned int serial_number;
}
-int do_gain (char **argv)
+int do_gain (char * const *argv)
{
int range;
}
-int do_eeprom (char **argv)
+int do_eeprom (char * const *argv)
{
#if defined(CONFIG_CMD_I2C)
if (strcmp (argv[2], "read") == 0) {
}
#if defined(CONFIG_CMD_I2C)
-static int trab_eeprom_read (char **argv)
+static int trab_eeprom_read (char * const *argv)
{
int i;
int len;
return (0);
}
-static int trab_eeprom_write (char **argv)
+static int trab_eeprom_write (char * const *argv)
{
int i;
int len;