powerpc: mpc8260: consolidate CONFIG_MPC8260 and CONFIG_8260

[karo-tx-uboot.git] / common / board_f.c

diff --git a/common/board_f.c b/common/board_f.c
index c2f47bc18892a2f381d24ea8b114833c0c96484d..4856975161b1b123901c399f72a290da452527a5 100644 (file)
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -149,13 +149,9 @@ static int display_text_info(void)
 #ifndef CONFIG_SANDBOX
        ulong bss_start, bss_end;
 
-#ifdef CONFIG_SYS_SYM_OFFSETS
-       bss_start = _bss_start_ofs + _TEXT_BASE;
-       bss_end = _bss_end_ofs + _TEXT_BASE;
-#else
        bss_start = (ulong)&__bss_start;
        bss_end = (ulong)&__bss_end;
-#endif
+
        debug("U-Boot code: %08X -> %08lX  BSS: -> %08lX\n",
              CONFIG_SYS_TEXT_BASE, bss_start, bss_end);
 #endif
@@ -223,17 +219,6 @@ static int show_dram_config(void)
        return 0;
 }
 
-ulong get_effective_memsize(void)
-{
-#ifndef        CONFIG_VERY_BIG_RAM
-       return gd->ram_size;
-#else
-       /* limit stack to what we can reasonable map */
-       return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
-               CONFIG_MAX_MEM_MAPPED : gd->ram_size);
-#endif
-}
-
 void __dram_init_banksize(void)
 {
 #if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE)
@@ -279,8 +264,8 @@ static int zero_global_data(void)
 
 static int setup_mon_len(void)
 {
-#ifdef CONFIG_SYS_SYM_OFFSETS
-       gd->mon_len = _bss_end_ofs;
+#ifdef __ARM__
+       gd->mon_len = (ulong)&__bss_end - (ulong)_start;
 #elif defined(CONFIG_SANDBOX)
        gd->mon_len = (ulong)&_end - (ulong)_init;
 #else
@@ -360,14 +345,10 @@ static int setup_fdt(void)
 {
 #ifdef CONFIG_OF_EMBED
        /* Get a pointer to the FDT */
-       gd->fdt_blob = _binary_dt_dtb_start;
+       gd->fdt_blob = __dtb_dt_begin;
 #elif defined CONFIG_OF_SEPARATE
        /* FDT is at end of image */
-# ifdef CONFIG_SYS_SYM_OFFSETS
-       gd->fdt_blob = (void *)(_end_ofs + CONFIG_SYS_TEXT_BASE);
-# else
        gd->fdt_blob = (ulong *)&_end;
-# endif
 #elif defined(CONFIG_OF_HOSTFILE)
        if (read_fdt_from_file()) {
                puts("Failed to read control FDT\n");
@@ -463,7 +444,7 @@ static int reserve_round_4k(void)
 static int reserve_mmu(void)
 {
        /* reserve TLB table */
-       gd->arch.tlb_size = 4096 * 4;
+       gd->arch.tlb_size = PGTABLE_SIZE;
        gd->relocaddr -= gd->arch.tlb_size;
 
        /* round down to next 64 kB limit */
@@ -615,7 +596,7 @@ static int reserve_stacks(void)
         * TODO(sjg@chromium.org): Perhaps create arch_reserve_stack()
         * to handle this and put in arch/xxx/lib/stack.c
         */
-# ifdef CONFIG_ARM
+# if defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
 #  ifdef CONFIG_USE_IRQ
        gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
        debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
@@ -661,7 +642,7 @@ static int setup_board_part1(void)
        bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;         /* size  of SRAM */
 #endif
 
-#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
+#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) || defined(CONFIG_5xx) || \
                defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
        bd->bi_immr_base = CONFIG_SYS_IMMR;     /* base  of IMMR register     */
 #endif
@@ -810,11 +791,6 @@ static int mark_bootstage(void)
 }
 
 static init_fnc_t init_sequence_f[] = {
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
-               !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
-               !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
-       zero_global_data,
-#endif
 #ifdef CONFIG_SANDBOX
        setup_ram_buf,
 #endif
@@ -882,19 +858,17 @@ static init_fnc_t init_sequence_f[] = {
 #endif
        display_options,        /* say that we are here */
        display_text_info,      /* show debugging info if required */
-#if defined(CONFIG_8260)
+#if defined(CONFIG_MPC8260)
        prt_8260_rsr,
        prt_8260_clks,
-#endif /* CONFIG_8260 */
+#endif /* CONFIG_MPC8260 */
 #if defined(CONFIG_MPC83xx)
        prt_83xx_rsr,
 #endif
 #ifdef CONFIG_PPC
        checkcpu,
 #endif
-#if defined(CONFIG_DISPLAY_CPUINFO)
        print_cpuinfo,          /* display cpu info (and speed) */
-#endif
 #if defined(CONFIG_MPC5xxx)
        prt_mpc5xxx_clks,
 #endif /* CONFIG_MPC5xxx */
@@ -1008,6 +982,17 @@ void board_init_f(ulong boot_flags)
        gd = &data;
 #endif
 
+       /*
+        * Clear global data before it is accessed at debug print
+        * in initcall_run_list. Otherwise the debug print probably
+        * get the wrong vaule of gd->have_console.
+        */
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
+               !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
+               !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
+       zero_global_data();
+#endif
+
        gd->flags = boot_flags;
        gd->have_console = 0;