tpm: Move the I2C TPM code into one file

[karo-tx-uboot.git] / common / cmd_dtt.c

diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index 4f7b049d792c60be7f78811559c458055ada3ca7..f2e750f2f1642f0fa71a6be1edac10eb48578f75 100644 (file)
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -2,63 +2,118 @@
  * (C) Copyright 2001
  * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <config.h>
 #include <command.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_DTT)
-
 #include <dtt.h>
 #include <i2c.h>
+#include <tmu.h>
+
+#if defined CONFIG_DTT_SENSORS
+static unsigned long sensor_initialized;
+
+static void _initialize_dtt(void)
+{
+       int i;
+       unsigned char sensors[] = CONFIG_DTT_SENSORS;
+
+       for (i = 0; i < sizeof(sensors); i++) {
+               if ((sensor_initialized & (1 << i)) == 0) {
+                       if (dtt_init_one(sensors[i]) != 0) {
+                               printf("DTT%d: Failed init!\n", i);
+                               continue;
+                       }
+                       sensor_initialized |= (1 << i);
+               }
+       }
+}
+
+void dtt_init(void)
+{
+       int old_bus;
+
+       /* switch to correct I2C bus */
+       old_bus = I2C_GET_BUS();
+       I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
+
+       _initialize_dtt();
+
+       /* switch back to original I2C bus */
+       I2C_SET_BUS(old_bus);
+}
+#endif
 
-int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int dtt_i2c(void)
 {
+#if defined CONFIG_DTT_SENSORS
        int i;
        unsigned char sensors[] = CONFIG_DTT_SENSORS;
        int old_bus;
 
+       /* Force a compilation error, if there are more then 32 sensors */
+       BUILD_BUG_ON(sizeof(sensors) > 32);
        /* switch to correct I2C bus */
+#ifdef CONFIG_SYS_I2C
+       old_bus = i2c_get_bus_num();
+       i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM);
+#else
        old_bus = I2C_GET_BUS();
-       I2C_SET_BUS(CFG_DTT_BUS_NUM);
+       I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
+#endif
+
+       _initialize_dtt();
 
        /*
         * Loop through sensors, read
         * temperature, and output it.
         */
-       for (i = 0; i < sizeof (sensors); i++)
-               printf ("DTT%d: %i C\n", i + 1, dtt_get_temp (sensors[i]));
+       for (i = 0; i < sizeof(sensors); i++)
+               printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i]));
 
        /* switch back to original I2C bus */
+#ifdef CONFIG_SYS_I2C
+       i2c_set_bus_num(old_bus);
+#else
        I2C_SET_BUS(old_bus);
+#endif
+#endif
 
        return 0;
+}
+
+int dtt_tmu(void)
+{
+#if defined CONFIG_TMU_CMD_DTT
+       int cur_temp;
+
+       /* Sense and return latest thermal info */
+       if (tmu_monitor(&cur_temp) == TMU_STATUS_INIT) {
+               puts("TMU is in unknown state, temperature is invalid\n");
+               return -1;
+       }
+       printf("Current temperature: %u degrees Celsius\n", cur_temp);
+#endif
+       return 0;
+}
+
+int do_dtt(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+       int err = 0;
+
+       err |= dtt_i2c();
+       err |= dtt_tmu();
+
+       return err;
 }      /* do_dtt() */
 
 /***************************************************/
 
 U_BOOT_CMD(
          dtt,  1,      1,      do_dtt,
-         "dtt     - Digital Thermometer and Themostat\n",
-         "        - Read temperature from digital thermometer and thermostat.\n"
+         "Read temperature from Digital Thermometer and Thermostat",
+         ""
 );
-
-#endif /* CONFIG_COMMANDS & CFG_CMD_DTT */