#include <common.h>
#include <command.h>
-#if (CONFIG_COMMANDS & CFG_CMD_MMC)
-#include <mmc.h>
-#endif
#ifdef CONFIG_HAS_DATAFLASH
#include <dataflash.h>
#endif
+#include <watchdog.h>
-#if (CONFIG_COMMANDS & (CFG_CMD_MEMORY | \
- CFG_CMD_I2C | \
- CFG_CMD_ITEST | \
- CFG_CMD_PCI | \
- CMD_CMD_PORTIO ) )
-int cmd_get_data_size(char* arg, int default_size)
-{
- /* Check for a size specification .b, .w or .l.
- */
- int len = strlen(arg);
- if (len > 2 && arg[len-2] == '.') {
- switch(arg[len-1]) {
- case 'b':
- return 1;
- case 'w':
- return 2;
- case 'l':
- return 4;
- case 's':
- return -2;
- default:
- return -1;
- }
- }
- return default_size;
-}
-#endif
-
-#if (CONFIG_COMMANDS & CFG_CMD_MEMORY)
+#include <u-boot/md5.h>
+#include <sha1.h>
#ifdef CMD_MEM_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
length = dp_last_length;
if (argc < 2) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
}
} while (nbytes > 0);
#else
- /* Print the lines. */
- print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size);
- addr += size*length;
+
+# if defined(CONFIG_BLACKFIN)
+ /* See if we're trying to display L1 inst */
+ if (addr_bfin_on_chip_mem(addr)) {
+ char linebuf[DISP_LINE_LEN];
+ ulong linebytes, nbytes = length * size;
+ do {
+ linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
+ memcpy(linebuf, (void *)addr, linebytes);
+ print_buffer(addr, linebuf, size, linebytes/size, DISP_LINE_LEN/size);
+
+ nbytes -= linebytes;
+ addr += linebytes;
+ if (ctrlc()) {
+ rc = 1;
+ break;
+ }
+ } while (nbytes > 0);
+ } else
+# endif
+
+ {
+ /* Print the lines. */
+ print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size);
+ addr += size*length;
+ }
#endif
dp_last_addr = addr;
int size;
if ((argc < 3) || (argc > 4)) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
ulong count;
if (argc < 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
ulong count;
if (argc < 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
int rcode = 0;
if (argc != 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
}
#endif
+#ifdef CONFIG_BLACKFIN
+ if (addr_bfin_on_chip_mem(addr1) || addr_bfin_on_chip_mem(addr2)) {
+ puts ("Comparison with L1 instruction memory not supported.\n\r");
+ return 0;
+ }
+#endif
+
ngood = 0;
while (count-- > 0) {
int size;
if (argc != 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
return 1;
}
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
/* check if we are copying to Flash */
if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
- && (!addr_dataflash(addr))
+ && (!addr_dataflash(dest))
#endif
) {
int rc;
}
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_MMC)
- if (mmc2info(dest)) {
- int rc;
-
- puts ("Copy to MMC... ");
- switch (rc = mmc_write ((uchar *)addr, dest, count*size)) {
- case 0:
- putc ('\n');
- return 1;
- case -1:
- puts ("failed\n");
- return 1;
- default:
- printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
- return 1;
- }
- puts ("done\n");
- return 0;
- }
-
- if (mmc2info(addr)) {
- int rc;
-
- puts ("Copy from MMC... ");
- switch (rc = mmc_read (addr, (uchar *)dest, count*size)) {
- case 0:
- putc ('\n');
- return 1;
- case -1:
- puts ("failed\n");
- return 1;
- default:
- printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
- return 1;
- }
- puts ("done\n");
- return 0;
- }
-#endif
-
#ifdef CONFIG_HAS_DATAFLASH
/* Check if we are copying from RAM or Flash to DataFlash */
if (addr_dataflash(dest) && !addr_dataflash(addr)){
}
/* Check if we are copying from DataFlash to RAM */
- if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){
+ if (addr_dataflash(addr) && !addr_dataflash(dest)
+#ifndef CONFIG_SYS_NO_FLASH
+ && (addr2info(dest) == NULL)
+#endif
+ ){
int rc;
rc = read_dataflash(addr, count * size, (char *) dest);
if (rc != 1) {
}
#endif
+#ifdef CONFIG_BLACKFIN
+ /* See if we're copying to/from L1 inst */
+ if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
+ memcpy((void *)dest, (void *)addr, count * size);
+ return 0;
+ }
+#endif
+
while (count-- > 0) {
if (size == 4)
*((ulong *)dest) = *((ulong *)addr);
volatile u_char *cp;
if (argc < 3) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
volatile u_char *cp;
if (argc < 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
/*
* Perform a memory test. A more complete alternative test can be
- * configured using CFG_ALT_MEMTEST. The complete test loops until
+ * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until
* interrupted by ctrl-c or by a failure of one of the sub-tests.
*/
int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
vu_long *addr, *start, *end;
ulong val;
ulong readback;
+ ulong errs = 0;
+ int iterations = 1;
+ int iteration_limit;
-#if defined(CFG_ALT_MEMTEST)
- vu_long addr_mask;
+#if defined(CONFIG_SYS_ALT_MEMTEST)
+ vu_long len;
vu_long offset;
vu_long test_offset;
vu_long pattern;
vu_long temp;
vu_long anti_pattern;
vu_long num_words;
-#if defined(CFG_MEMTEST_SCRATCH)
- vu_long *dummy = (vu_long*)CFG_MEMTEST_SCRATCH;
+#if defined(CONFIG_SYS_MEMTEST_SCRATCH)
+ vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH;
#else
vu_long *dummy = 0; /* yes, this is address 0x0, not NULL */
#endif
int j;
- int iterations = 1;
static const ulong bitpattern[] = {
0x00000001, /* single bit */
#else
ulong incr;
ulong pattern;
- int rcode = 0;
#endif
- if (argc > 1) {
+ if (argc > 1)
start = (ulong *)simple_strtoul(argv[1], NULL, 16);
- } else {
- start = (ulong *)CFG_MEMTEST_START;
- }
+ else
+ start = (ulong *)CONFIG_SYS_MEMTEST_START;
- if (argc > 2) {
+ if (argc > 2)
end = (ulong *)simple_strtoul(argv[2], NULL, 16);
- } else {
- end = (ulong *)(CFG_MEMTEST_END);
- }
+ else
+ end = (ulong *)(CONFIG_SYS_MEMTEST_END);
- if (argc > 3) {
+ if (argc > 3)
pattern = (ulong)simple_strtoul(argv[3], NULL, 16);
- } else {
+ else
pattern = 0;
- }
-#if defined(CFG_ALT_MEMTEST)
+ if (argc > 4)
+ iteration_limit = (ulong)simple_strtoul(argv[4], NULL, 16);
+ else
+ iteration_limit = 0;
+
+#if defined(CONFIG_SYS_ALT_MEMTEST)
printf ("Testing %08x ... %08x:\n", (uint)start, (uint)end);
PRINTF("%s:%d: start 0x%p end 0x%p\n",
__FUNCTION__, __LINE__, start, end);
return 1;
}
+
+ if (iteration_limit && iterations > iteration_limit) {
+ printf("Tested %d iteration(s) with %lu errors.\n",
+ iterations-1, errs);
+ return errs != 0;
+ }
+
printf("Iteration: %6d\r", iterations);
- PRINTF("Iteration: %6d\n", iterations);
+ PRINTF("\n");
iterations++;
/*
*dummy = ~val; /* clear the test data off of the bus */
readback = *addr;
if(readback != val) {
- printf ("FAILURE (data line): "
+ printf ("FAILURE (data line): "
"expected %08lx, actual %08lx\n",
val, readback);
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
*addr = ~val;
*dummy = val;
printf ("FAILURE (data line): "
"Is %08lx, should be %08lx\n",
readback, ~val);
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
}
}
* all possible.
*
* Returns: 0 if the test succeeds, 1 if the test fails.
- *
- * ## NOTE ## Be sure to specify start and end
- * addresses such that addr_mask has
- * lots of bits set. For example an
- * address range of 01000000 02000000 is
- * bad while a range of 01000000
- * 01ffffff is perfect.
*/
- addr_mask = ((ulong)end - (ulong)start)/sizeof(vu_long);
+ len = ((ulong)end - (ulong)start)/sizeof(vu_long);
pattern = (vu_long) 0xaaaaaaaa;
anti_pattern = (vu_long) 0x55555555;
- PRINTF("%s:%d: addr mask = 0x%.8lx\n",
+ PRINTF("%s:%d: length = 0x%.8lx\n",
__FUNCTION__, __LINE__,
- addr_mask);
+ len);
/*
* Write the default pattern at each of the
* power-of-two offsets.
*/
- for (offset = 1; (offset & addr_mask) != 0; offset <<= 1) {
+ for (offset = 1; offset < len; offset <<= 1) {
start[offset] = pattern;
}
test_offset = 0;
start[test_offset] = anti_pattern;
- for (offset = 1; (offset & addr_mask) != 0; offset <<= 1) {
+ for (offset = 1; offset < len; offset <<= 1) {
temp = start[offset];
if (temp != pattern) {
printf ("\nFAILURE: Address bit stuck high @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx\n",
(ulong)&start[offset], pattern, temp);
- return 1;
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
}
start[test_offset] = pattern;
+ WATCHDOG_RESET();
/*
* Check for addr bits stuck low or shorted.
*/
- for (test_offset = 1; (test_offset & addr_mask) != 0; test_offset <<= 1) {
+ for (test_offset = 1; test_offset < len; test_offset <<= 1) {
start[test_offset] = anti_pattern;
- for (offset = 1; (offset & addr_mask) != 0; offset <<= 1) {
+ for (offset = 1; offset < len; offset <<= 1) {
temp = start[offset];
if ((temp != pattern) && (offset != test_offset)) {
printf ("\nFAILURE: Address bit stuck low or shorted @"
" 0x%.8lx: expected 0x%.8lx, actual 0x%.8lx\n",
(ulong)&start[offset], pattern, temp);
- return 1;
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
}
start[test_offset] = pattern;
* Fill memory with a known pattern.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
start[offset] = pattern;
}
* Check each location and invert it for the second pass.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
temp = start[offset];
if (temp != pattern) {
printf ("\nFAILURE (read/write) @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
(ulong)&start[offset], pattern, temp);
- return 1;
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
anti_pattern = ~pattern;
* Check each location for the inverted pattern and zero it.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
anti_pattern = ~pattern;
temp = start[offset];
if (temp != anti_pattern) {
printf ("\nFAILURE (read/write): @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
(ulong)&start[offset], anti_pattern, temp);
- return 1;
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
start[offset] = 0;
}
return 1;
}
+ if (iteration_limit && iterations > iteration_limit) {
+ printf("Tested %d iteration(s) with %lu errors.\n",
+ iterations-1, errs);
+ return errs != 0;
+ }
+ ++iterations;
+
printf ("\rPattern %08lX Writing..."
"%12s"
"\b\b\b\b\b\b\b\b\b\b",
pattern, "");
for (addr=start,val=pattern; addr<end; addr++) {
+ WATCHDOG_RESET();
*addr = val;
val += incr;
}
puts ("Reading...");
for (addr=start,val=pattern; addr<end; addr++) {
+ WATCHDOG_RESET();
readback = *addr;
if (readback != val) {
printf ("\nMem error @ 0x%08X: "
"found %08lX, expected %08lX\n",
(uint)addr, readback, val);
- rcode = 1;
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
val += incr;
}
}
incr = -incr;
}
- return rcode;
#endif
+ return 0; /* not reached */
}
extern char console_buffer[];
if (argc != 2) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
}
#endif
+#ifdef CONFIG_BLACKFIN
+ if (addr_bfin_on_chip_mem(addr)) {
+ puts ("Can't modify L1 instruction in place. Use cp instead.\n\r");
+ return 0;
+ }
+#endif
+
/* Print the address, followed by value. Then accept input for
* the next value. A non-converted value exits.
*/
ulong *ptr;
if (argc < 3) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
if (argc < 3) {
usage:
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
}
#endif /* CONFIG_CRC32_VERIFY */
+#ifdef CONFIG_CMD_MD5SUM
+int do_md5sum(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned long addr, len;
+ unsigned int i;
+ u8 output[16];
+
+ if (argc < 3) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ addr = simple_strtoul(argv[1], NULL, 16);
+ len = simple_strtoul(argv[2], NULL, 16);
+
+ md5((unsigned char *) addr, len, output);
+ printf("md5 for %08lx ... %08lx ==> ", addr, addr + len - 1);
+ for (i = 0; i < 16; i++)
+ printf("%02x", output[i]);
+ printf("\n");
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_SHA1
+int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned long addr, len;
+ unsigned int i;
+ u8 output[20];
+
+ if (argc < 3) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ addr = simple_strtoul(argv[1], NULL, 16);
+ len = simple_strtoul(argv[2], NULL, 16);
+
+ sha1_csum((unsigned char *) addr, len, output);
+ printf("SHA1 for %08lx ... %08lx ==> ", addr, addr + len - 1);
+ for (i = 0; i < 20; i++)
+ printf("%02x", output[i]);
+ printf("\n");
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_UNZIP
+int gunzip (void *, int, unsigned char *, unsigned long *);
+
+int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned long src, dst;
+ unsigned long src_len = ~0UL, dst_len = ~0UL;
+
+ switch (argc) {
+ case 4:
+ dst_len = simple_strtoul(argv[3], NULL, 16);
+ /* fall through */
+ case 3:
+ src = simple_strtoul(argv[1], NULL, 16);
+ dst = simple_strtoul(argv[2], NULL, 16);
+ break;
+ default:
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ return !!gunzip((void *) dst, dst_len, (void *) src, &src_len);
+}
+#endif /* CONFIG_CMD_UNZIP */
+
+
/**************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_MEMORY)
U_BOOT_CMD(
- md, 3, 1, do_mem_md,
- "md - memory display\n",
- "[.b, .w, .l] address [# of objects]\n - memory display\n"
+ md, 3, 1, do_mem_md,
+ "memory display",
+ "[.b, .w, .l] address [# of objects]"
);
U_BOOT_CMD(
- mm, 2, 1, do_mem_mm,
- "mm - memory modify (auto-incrementing)\n",
- "[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
+ mm, 2, 1, do_mem_mm,
+ "memory modify (auto-incrementing address)",
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
- nm, 2, 1, do_mem_nm,
- "nm - memory modify (constant address)\n",
- "[.b, .w, .l] address\n - memory modify, read and keep address\n"
+ nm, 2, 1, do_mem_nm,
+ "memory modify (constant address)",
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
- mw, 4, 1, do_mem_mw,
- "mw - memory write (fill)\n",
- "[.b, .w, .l] address value [count]\n - write memory\n"
+ mw, 4, 1, do_mem_mw,
+ "memory write (fill)",
+ "[.b, .w, .l] address value [count]"
);
U_BOOT_CMD(
- cp, 4, 1, do_mem_cp,
- "cp - memory copy\n",
- "[.b, .w, .l] source target count\n - copy memory\n"
+ cp, 4, 1, do_mem_cp,
+ "memory copy",
+ "[.b, .w, .l] source target count"
);
U_BOOT_CMD(
- cmp, 4, 1, do_mem_cmp,
- "cmp - memory compare\n",
- "[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
+ cmp, 4, 1, do_mem_cmp,
+ "memory compare",
+ "[.b, .w, .l] addr1 addr2 count"
);
#ifndef CONFIG_CRC32_VERIFY
U_BOOT_CMD(
- crc32, 4, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
- "address count [addr]\n - compute CRC32 checksum [save at addr]\n"
+ crc32, 4, 1, do_mem_crc,
+ "checksum calculation",
+ "address count [addr]\n - compute CRC32 checksum [save at addr]"
);
#else /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
- crc32, 5, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ crc32, 5, 1, do_mem_crc,
+ "checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
- "-v address count crc\n - verify crc of memory area\n"
+ "-v address count crc\n - verify crc of memory area"
);
#endif /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
- base, 2, 1, do_mem_base,
- "base - print or set address offset\n",
+ base, 2, 1, do_mem_base,
+ "print or set address offset",
"\n - print address offset for memory commands\n"
- "base off\n - set address offset for memory commands to 'off'\n"
+ "base off\n - set address offset for memory commands to 'off'"
);
U_BOOT_CMD(
- loop, 3, 1, do_mem_loop,
- "loop - infinite loop on address range\n",
- "[.b, .w, .l] address number_of_objects\n"
- " - loop on a set of addresses\n"
+ loop, 3, 1, do_mem_loop,
+ "infinite loop on address range",
+ "[.b, .w, .l] address number_of_objects"
);
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
- loopw, 4, 1, do_mem_loopw,
- "loopw - infinite write loop on address range\n",
- "[.b, .w, .l] address number_of_objects data_to_write\n"
- " - loop on a set of addresses\n"
+ loopw, 4, 1, do_mem_loopw,
+ "infinite write loop on address range",
+ "[.b, .w, .l] address number_of_objects data_to_write"
);
#endif /* CONFIG_LOOPW */
U_BOOT_CMD(
- mtest, 4, 1, do_mem_mtest,
- "mtest - simple RAM test\n",
- "[start [end [pattern]]]\n"
- " - simple RAM read/write test\n"
+ mtest, 5, 1, do_mem_mtest,
+ "simple RAM read/write test",
+ "[start [end [pattern [iterations]]]]"
);
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
- mdc, 4, 1, do_mem_mdc,
- "mdc - memory display cyclic\n",
- "[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n"
+ mdc, 4, 1, do_mem_mdc,
+ "memory display cyclic",
+ "[.b, .w, .l] address count delay(ms)"
);
U_BOOT_CMD(
- mwc, 4, 1, do_mem_mwc,
- "mwc - memory write cyclic\n",
- "[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n"
+ mwc, 4, 1, do_mem_mwc,
+ "memory write cyclic",
+ "[.b, .w, .l] address value delay(ms)"
);
#endif /* CONFIG_MX_CYCLIC */
+#ifdef CONFIG_CMD_MD5SUM
+U_BOOT_CMD(
+ md5sum, 3, 1, do_md5sum,
+ "compute MD5 message digest",
+ "address count"
+);
#endif
-#endif /* CFG_CMD_MEMORY */
+
+#ifdef CONFIG_CMD_SHA1SUM
+U_BOOT_CMD(
+ sha1sum, 3, 1, do_sha1sum,
+ "compute SHA1 message digest",
+ "address count"
+);
+#endif /* CONFIG_CMD_SHA1 */
+
+#ifdef CONFIG_CMD_UNZIP
+U_BOOT_CMD(
+ unzip, 4, 1, do_unzip,
+ "unzip a memory region",
+ "srcaddr dstaddr [dstsize]"
+);
+#endif /* CONFIG_CMD_UNZIP */
projects / karo-tx-uboot.git / blobdiff