#include <common.h>
#include <div64.h>
+#include <dm.h>
#include <malloc.h>
+#include <mapmem.h>
+#include <spi.h>
#include <spi_flash.h>
+#include <jffs2/jffs2.h>
+#include <linux/mtd/mtd.h>
#include <asm/io.h>
-
-#ifndef CONFIG_SF_DEFAULT_SPEED
-# define CONFIG_SF_DEFAULT_SPEED 1000000
-#endif
-#ifndef CONFIG_SF_DEFAULT_MODE
-# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
-#endif
-#ifndef CONFIG_SF_DEFAULT_CS
-# define CONFIG_SF_DEFAULT_CS 0
-#endif
-#ifndef CONFIG_SF_DEFAULT_BUS
-# define CONFIG_SF_DEFAULT_BUS 0
-#endif
+#include <dm/device-internal.h>
static struct spi_flash *flash;
-
/*
* This function computes the length argument for the erase command.
* The length on which the command is to operate can be given in two forms:
{
/* less accurate but avoids overflow */
if (len >= ((unsigned int) -1) / 1024)
- return len / (max(get_timer(start_ms) / 1024, 1));
+ return len / (max(get_timer(start_ms) / 1024, 1UL));
else
- return 1024 * len / max(get_timer(start_ms), 1);
+ return 1024 * len / max(get_timer(start_ms), 1UL);
}
static int do_spi_flash_probe(int argc, char * const argv[])
unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
unsigned int mode = CONFIG_SF_DEFAULT_MODE;
char *endp;
+#ifdef CONFIG_DM_SPI_FLASH
+ struct udevice *new, *bus_dev;
+ int ret;
+#else
struct spi_flash *new;
+#endif
if (argc >= 2) {
cs = simple_strtoul(argv[1], &endp, 0);
return -1;
}
+#ifdef CONFIG_DM_SPI_FLASH
+ /* Remove the old device, otherwise probe will just be a nop */
+ ret = spi_find_bus_and_cs(bus, cs, &bus_dev, &new);
+ if (!ret) {
+ device_remove(new);
+ device_unbind(new);
+ }
+ flash = NULL;
+ ret = spi_flash_probe_bus_cs(bus, cs, speed, mode, &new);
+ if (ret) {
+ printf("Failed to initialize SPI flash at %u:%u (error %d)\n",
+ bus, cs, ret);
+ return 1;
+ }
+
+ flash = dev_get_uclass_priv(new);
+#else
+ if (flash)
+ spi_flash_free(flash);
+
new = spi_flash_probe(bus, cs, speed, mode);
+ flash = new;
+
if (!new) {
printf("Failed to initialize SPI flash at %u:%u\n", bus, cs);
return 1;
}
- if (flash)
- spi_flash_free(flash);
flash = new;
+#endif
return 0;
}
static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset,
size_t len, const char *buf, char *cmp_buf, size_t *skipped)
{
+ char *ptr = (char *)buf;
+
debug("offset=%#x, sector_size=%#x, len=%#zx\n",
offset, flash->sector_size, len);
/* Read the entire sector so to allow for rewriting */
/* Erase the entire sector */
if (spi_flash_erase(flash, offset, flash->sector_size))
return "erase";
- /* Write the initial part of the block from the source */
- if (spi_flash_write(flash, offset, len, buf))
- return "write";
- /* If it's a partial sector, rewrite the existing part */
+ /* If it's a partial sector, copy the data into the temp-buffer */
if (len != flash->sector_size) {
- /* Rewrite the original data to the end of the sector */
- if (spi_flash_write(flash, offset + len,
- flash->sector_size - len, &cmp_buf[len]))
- return "write";
+ memcpy(cmp_buf, buf, len);
+ ptr = cmp_buf;
}
+ /* Write one complete sector */
+ if (spi_flash_write(flash, offset, flash->sector_size, ptr))
+ return "write";
return NULL;
}
if (end - buf >= 200)
scale = (end - buf) / 100;
- cmp_buf = malloc(flash->sector_size);
+ cmp_buf = memalign(ARCH_DMA_MINALIGN, flash->sector_size);
if (cmp_buf) {
ulong last_update = get_timer(0);
for (; buf < end && !err_oper; buf += todo, offset += todo) {
- todo = min(end - buf, flash->sector_size);
+ todo = min_t(size_t, end - buf, flash->sector_size);
if (get_timer(last_update) > 100) {
printf(" \rUpdating, %zu%% %lu B/s",
100 - (end - buf) / scale,
static int do_spi_flash_read_write(int argc, char * const argv[])
{
unsigned long addr;
- unsigned long offset;
- unsigned long len;
void *buf;
char *endp;
int ret = 1;
+ int dev = 0;
+ loff_t offset, len, maxsize;
- if (argc < 4)
+ if (argc < 3)
return -1;
addr = simple_strtoul(argv[1], &endp, 16);
if (*argv[1] == 0 || *endp != 0)
return -1;
- offset = simple_strtoul(argv[2], &endp, 16);
- if (*argv[2] == 0 || *endp != 0)
- return -1;
- len = simple_strtoul(argv[3], &endp, 16);
- if (*argv[3] == 0 || *endp != 0)
+
+ if (mtd_arg_off_size(argc - 2, &argv[2], &dev, &offset, &len,
+ &maxsize, MTD_DEV_TYPE_NOR, flash->size))
return -1;
/* Consistency checking */
else
ret = spi_flash_write(flash, offset, len, buf);
- printf("SF: %zu bytes @ %#x %s: %s\n", (size_t)len, (u32)offset,
- read ? "Read" : "Written", ret ? "ERROR" : "OK");
+ printf("SF: %zu bytes @ %#x %s: ", (size_t)len, (u32)offset,
+ read ? "Read" : "Written");
+ if (ret)
+ printf("ERROR %d\n", ret);
+ else
+ printf("OK\n");
}
unmap_physmem(buf, len);
static int do_spi_flash_erase(int argc, char * const argv[])
{
- unsigned long offset;
- unsigned long len;
- char *endp;
int ret;
+ int dev = 0;
+ loff_t offset, len, maxsize;
+ ulong size;
if (argc < 3)
return -1;
- offset = simple_strtoul(argv[1], &endp, 16);
- if (*argv[1] == 0 || *endp != 0)
+ if (mtd_arg_off(argv[1], &dev, &offset, &len, &maxsize,
+ MTD_DEV_TYPE_NOR, flash->size))
return -1;
- ret = sf_parse_len_arg(argv[2], &len);
+ ret = sf_parse_len_arg(argv[2], &size);
if (ret != 1)
return -1;
/* Consistency checking */
- if (offset + len > flash->size) {
+ if (offset + size > flash->size) {
printf("ERROR: attempting %s past flash size (%#x)\n",
argv[0], flash->size);
return 1;
}
- ret = spi_flash_erase(flash, offset, len);
- printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)len, (u32)offset,
+ ret = spi_flash_erase(flash, offset, size);
+ printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)size, (u32)offset,
ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
int bps; /* Bits per second */
speed = (long long)test->bytes * 1000;
- do_div(speed, test->time_ms[stage] * 1024);
+ if (test->time_ms[stage])
+ do_div(speed, test->time_ms[stage] * 1024);
bps = speed * 8;
printf("%d %s: %d ticks, %d KiB/s %d.%03d Mbps\n", stage,
for (i = 0; i < len; i++) {
if (vbuf[i] != 0xff) {
printf("Check failed at %d\n", i);
- print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+ print_buffer(i, vbuf + i, 1,
+ min_t(uint, len - i, 0x40), 0);
return -1;
}
}
for (i = 0; i < len; i++) {
if (buf[i] != vbuf[i]) {
printf("Verify failed at %d, good data:\n", i);
- print_buffer(i, buf + i, 1, min(len - i, 0x40), 0);
+ print_buffer(i, buf + i, 1,
+ min_t(uint, len - i, 0x40), 0);
printf("Bad data:\n");
- print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+ print_buffer(i, vbuf + i, 1,
+ min_t(uint, len - i, 0x40), 0);
return -1;
}
}
{
unsigned long offset;
unsigned long len;
- uint8_t *buf = (uint8_t *)CONFIG_SYS_TEXT_BASE;
+ uint8_t *buf, *from;
char *endp;
uint8_t *vbuf;
int ret;
+ if (argc < 3)
+ return -1;
offset = simple_strtoul(argv[1], &endp, 16);
if (*argv[1] == 0 || *endp != 0)
return -1;
if (*argv[2] == 0 || *endp != 0)
return -1;
- vbuf = malloc(len);
+ vbuf = memalign(ARCH_DMA_MINALIGN, len);
if (!vbuf) {
- printf("Cannot allocate memory\n");
+ printf("Cannot allocate memory (%lu bytes)\n", len);
return 1;
}
- buf = malloc(len);
+ buf = memalign(ARCH_DMA_MINALIGN, len);
if (!buf) {
free(vbuf);
- printf("Cannot allocate memory\n");
+ printf("Cannot allocate memory (%lu bytes)\n", len);
return 1;
}
- memcpy(buf, (char *)CONFIG_SYS_TEXT_BASE, len);
+ from = map_sysmem(CONFIG_SYS_TEXT_BASE, 0);
+ memcpy(buf, from, len);
ret = spi_flash_test(flash, buf, len, offset, vbuf);
free(vbuf);
free(buf);
"SPI flash sub-system",
"probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n"
" and chip select\n"
- "sf read addr offset len - read `len' bytes starting at\n"
- " `offset' to memory at `addr'\n"
- "sf write addr offset len - write `len' bytes from memory\n"
- " at `addr' to flash at `offset'\n"
- "sf erase offset [+]len - erase `len' bytes from `offset'\n"
- " `+len' round up `len' to block size\n"
- "sf update addr offset len - erase and write `len' bytes from memory\n"
- " at `addr' to flash at `offset'"
+ "sf read addr offset|partition len - read `len' bytes starting at\n"
+ " `offset' or from start of mtd\n"
+ " `partition'to memory at `addr'\n"
+ "sf write addr offset|partition len - write `len' bytes from memory\n"
+ " at `addr' to flash at `offset'\n"
+ " or to start of mtd `partition'\n"
+ "sf erase offset|partition [+]len - erase `len' bytes from `offset'\n"
+ " or from start of mtd `partition'\n"
+ " `+len' round up `len' to block size\n"
+ "sf update addr offset|partition len - erase and write `len' bytes from memory\n"
+ " at `addr' to flash at `offset'\n"
+ " or to start of mtd `partition'\n"
SF_TEST_HELP
);
projects / karo-tx-uboot.git / blobdiff