}
}
- err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start + 1);
+ err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start);
if (err < 0) {
printf("fdt_initrd: %s\n", fdt_strerror(err));
return err;
do_fixup_by_compat(fdt, compat, prop, &val, 4, create);
}
-int fdt_fixup_memory(void *blob, u64 start, u64 size)
+/*
+ * Get cells len in bytes
+ * if #NNNN-cells property is 2 then len is 8
+ * otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+ const u32 *cell;
+
+ cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+ if (cell && *cell == 2)
+ return 8;
+
+ return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
+{
+ int shift = (size - 1) * 8;
+ while (size-- > 0) {
+ *addr++ = (val >> shift) & 0xff;
+ shift -= 8;
+ }
+}
+
+int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks)
{
- int err, nodeoffset, len = 0;
- u8 tmp[16];
- const u32 *addrcell, *sizecell;
+ int err, nodeoffset;
+ int addr_cell_len, size_cell_len, len;
+ u8 tmp[banks * 16]; /* Up to 64-bit address + 64-bit size */
+ int bank;
err = fdt_check_header(blob);
if (err < 0) {
return err;
}
- addrcell = fdt_getprop(blob, 0, "#address-cells", NULL);
- /* use shifts and mask to ensure endianness */
- if ((addrcell) && (*addrcell == 2)) {
- tmp[0] = (start >> 56) & 0xff;
- tmp[1] = (start >> 48) & 0xff;
- tmp[2] = (start >> 40) & 0xff;
- tmp[3] = (start >> 32) & 0xff;
- tmp[4] = (start >> 24) & 0xff;
- tmp[5] = (start >> 16) & 0xff;
- tmp[6] = (start >> 8) & 0xff;
- tmp[7] = (start ) & 0xff;
- len = 8;
- } else {
- tmp[0] = (start >> 24) & 0xff;
- tmp[1] = (start >> 16) & 0xff;
- tmp[2] = (start >> 8) & 0xff;
- tmp[3] = (start ) & 0xff;
- len = 4;
- }
+ addr_cell_len = get_cells_len(blob, "#address-cells");
+ size_cell_len = get_cells_len(blob, "#size-cells");
- sizecell = fdt_getprop(blob, 0, "#size-cells", NULL);
- /* use shifts and mask to ensure endianness */
- if ((sizecell) && (*sizecell == 2)) {
- tmp[0+len] = (size >> 56) & 0xff;
- tmp[1+len] = (size >> 48) & 0xff;
- tmp[2+len] = (size >> 40) & 0xff;
- tmp[3+len] = (size >> 32) & 0xff;
- tmp[4+len] = (size >> 24) & 0xff;
- tmp[5+len] = (size >> 16) & 0xff;
- tmp[6+len] = (size >> 8) & 0xff;
- tmp[7+len] = (size ) & 0xff;
- len += 8;
- } else {
- tmp[0+len] = (size >> 24) & 0xff;
- tmp[1+len] = (size >> 16) & 0xff;
- tmp[2+len] = (size >> 8) & 0xff;
- tmp[3+len] = (size ) & 0xff;
- len += 4;
+ for (bank = 0, len = 0; bank < banks; bank++) {
+ write_cell(tmp + len, start[bank], addr_cell_len);
+ len += addr_cell_len;
+
+ write_cell(tmp + len, size[bank], size_cell_len);
+ len += size_cell_len;
}
err = fdt_setprop(blob, nodeoffset, "reg", tmp, len);
return 0;
}
+int fdt_fixup_memory(void *blob, u64 start, u64 size)
+{
+ return fdt_fixup_memory_banks(blob, &start, &size, 1);
+}
+
void fdt_fixup_ethernet(void *fdt)
{
int node, i, j;
#endif
#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+/*
+ * Provide a weak default function to return the flash bank size.
+ * There might be multiple non-identical flash chips connected to one
+ * chip-select, so we need to pass an index as well.
+ */
+u32 __flash_get_bank_size(int cs, int idx)
+{
+ extern flash_info_t flash_info[];
+
+ /*
+ * As default, a simple 1:1 mapping is provided. Boards with
+ * a different mapping need to supply a board specific mapping
+ * routine.
+ */
+ return flash_info[cs].size;
+}
+u32 flash_get_bank_size(int cs, int idx)
+ __attribute__((weak, alias("__flash_get_bank_size")));
+
/*
* This function can be used to update the size in the "reg" property
- * of the NOR FLASH device nodes. This is necessary for boards with
+ * of all NOR FLASH device nodes. This is necessary for boards with
* non-fixed NOR FLASH sizes.
*/
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
+int fdt_fixup_nor_flash_size(void *blob)
{
char compat[][16] = { "cfi-flash", "jedec-flash" };
int off;
int len;
struct fdt_property *prop;
- u32 *reg;
+ u32 *reg, *reg2;
int i;
for (i = 0; i < 2; i++) {
off = fdt_node_offset_by_compatible(blob, -1, compat[i]);
while (off != -FDT_ERR_NOTFOUND) {
+ int idx;
+
/*
- * Found one compatible node, now check if this one
- * has the correct CS
+ * Found one compatible node, so fixup the size
+ * int its reg properties
*/
prop = fdt_get_property_w(blob, off, "reg", &len);
if (prop) {
- reg = (u32 *)&prop->data[0];
- if (reg[0] == cs) {
- reg[2] = size;
- fdt_setprop(blob, off, "reg", reg,
- 3 * sizeof(u32));
-
- return 0;
+ int tuple_size = 3 * sizeof(reg);
+
+ /*
+ * There might be multiple reg-tuples,
+ * so loop through them all
+ */
+ reg = reg2 = (u32 *)&prop->data[0];
+ for (idx = 0; idx < (len / tuple_size); idx++) {
+ /*
+ * Update size in reg property
+ */
+ reg[2] = flash_get_bank_size(reg[0],
+ idx);
+
+ /*
+ * Point to next reg tuple
+ */
+ reg += 3;
}
+
+ fdt_setprop(blob, off, "reg", reg2, len);
}
/* Move to next compatible node */
}
}
- return -1;
+ return 0;
}
#endif
+int fdt_increase_size(void *fdt, int add_len)
+{
+ int newlen;
+
+ newlen = fdt_totalsize(fdt) + add_len;
+
+ /* Open in place with a new len */
+ return fdt_open_into(fdt, fdt, newlen);
+}
+
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
#include <jffs2/load_kernel.h>
#include <mtd_node.h>
return 0;
}
-int fdt_increase_size(void *fdt, int add_len)
-{
- int newlen;
-
- newlen = fdt_totalsize(fdt) + add_len;
-
- /* Open in place with a new len */
- return fdt_open_into(fdt, fdt, newlen);
-}
-
int fdt_del_partitions(void *blob, int parent_offset)
{
const void *prop;
if (addrc) {
prop = fdt_getprop(blob, parentoffset, "#address-cells", NULL);
if (prop)
- *addrc = be32_to_cpup(prop);
+ *addrc = be32_to_cpup((u32 *)prop);
else
*addrc = 2;
}
if (sizec) {
prop = fdt_getprop(blob, parentoffset, "#size-cells", NULL);
if (prop)
- *sizec = be32_to_cpup(prop);
+ *sizec = be32_to_cpup((u32 *)prop);
else
*sizec = 1;
}
return phandle + 1;
}
+
+#if defined(CONFIG_VIDEO)
+int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf)
+{
+ int noff;
+ int ret;
+
+ noff = fdt_node_offset_by_compatible(blob, -1, compat);
+ if (noff != -FDT_ERR_NOTFOUND) {
+ debug("%s: %s\n", fdt_get_name(blob, noff, 0), compat);
+add_edid:
+ ret = fdt_setprop(blob, noff, "edid", edid_buf, 128);
+ if (ret == -FDT_ERR_NOSPACE) {
+ ret = fdt_increase_size(blob, 512);
+ if (!ret)
+ goto add_edid;
+ else
+ goto err_size;
+ } else if (ret < 0) {
+ printf("Can't add property: %s\n", fdt_strerror(ret));
+ return ret;
+ }
+ }
+ return 0;
+err_size:
+ printf("Can't increase blob size: %s\n", fdt_strerror(ret));
+ return ret;
+}
+#endif
+
+/*
+ * Verify the physical address of device tree node for a given alias
+ *
+ * This function locates the device tree node of a given alias, and then
+ * verifies that the physical address of that device matches the given
+ * parameter. It displays a message if there is a mismatch.
+ *
+ * Returns 1 on success, 0 on failure
+ */
+int fdt_verify_alias_address(void *fdt, int anode, const char *alias, u64 addr)
+{
+ const char *path;
+ const u32 *reg;
+ int node, len;
+ u64 dt_addr;
+
+ path = fdt_getprop(fdt, anode, alias, NULL);
+ if (!path) {
+ /* If there's no such alias, then it's not a failure */
+ return 1;
+ }
+
+ node = fdt_path_offset(fdt, path);
+ if (node < 0) {
+ printf("Warning: device tree alias '%s' points to invalid "
+ "node %s.\n", alias, path);
+ return 0;
+ }
+
+ reg = fdt_getprop(fdt, node, "reg", &len);
+ if (!reg) {
+ printf("Warning: device tree node '%s' has no address.\n",
+ path);
+ return 0;
+ }
+
+ dt_addr = fdt_translate_address(fdt, node, reg);
+ if (addr != dt_addr) {
+ printf("Warning: U-Boot configured device %s at address %llx,\n"
+ " but the device tree has it address %llx.\n",
+ alias, addr, dt_addr);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * Returns the base address of an SOC or PCI node
+ */
+u64 fdt_get_base_address(void *fdt, int node)
+{
+ int size;
+ u32 naddr;
+ const u32 *prop;
+
+ prop = fdt_getprop(fdt, node, "#address-cells", &size);
+ if (prop && size == 4)
+ naddr = *prop;
+ else
+ naddr = 2;
+
+ prop = fdt_getprop(fdt, node, "ranges", &size);
+
+ return prop ? fdt_translate_address(fdt, node, prop + naddr) : 0;
+}
projects / karo-tx-uboot.git / blobdiff