#define UMASS_BBB_CSW_SIZE 13
#define USB_MAX_STOR_DEV 5
-static int usb_max_devs; /* number of highest available usb device */
+static int usb_max_devs = 0; /* number of highest available usb device */
static block_dev_desc_t usb_dev_desc[USB_MAX_STOR_DEV];
}
/*********************************************************************************
- * (re)-scan the usb and reports device info
+ * show info on storage devices; 'usb start/init' must be invoked earlier
+ * as we only retrieve structures populated during devices initialization
+ */
+void usb_stor_info(void)
+{
+ int i;
+
+ if (usb_max_devs > 0)
+ for (i = 0; i < usb_max_devs; i++) {
+ printf (" Device %d: ", i);
+ dev_print(&usb_dev_desc[i]);
+ }
+ else
+ printf("No storage devices, perhaps not 'usb start'ed..?\n");
+}
+
+/*********************************************************************************
+ * scan the usb and reports device info
* to the user if mode = 1
* returns current device or -1 if no
*/
memset(usb_stor_buf, 0, sizeof(usb_stor_buf));
if(mode==1) {
- printf(" scanning bus for storage devices...\n");
+ printf(" scanning bus for storage devices... ");
}
usb_disable_asynch(1); /* asynch transfer not allowed */
usb_dev_desc[i].part_type=PART_TYPE_UNKNOWN;
usb_dev_desc[i].block_read=usb_stor_read;
}
+
usb_max_devs=0;
for(i=0;i<USB_MAX_DEVICE;i++) {
dev=usb_get_dev_index(i); /* get device */
}
if(usb_storage_probe(dev,0,&usb_stor[usb_max_devs])) { /* ok, it is a storage devices */
/* get info and fill it in */
-
- if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs])) {
- if(mode==1) {
- printf (" Device %d: ", usb_max_devs);
- dev_print(&usb_dev_desc[usb_max_devs]);
- } /* if mode */
+ if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs]))
usb_max_devs++;
- } /* if get info ok */
} /* if storage device */
if(usb_max_devs==USB_MAX_STOR_DEV) {
printf("max USB Storage Device reached: %d stopping\n",usb_max_devs);
break;
}
} /* for */
+
usb_disable_asynch(0); /* asynch transfer allowed */
+ printf("%d Storage Device(s) found\n", usb_max_devs);
if(usb_max_devs>0)
return 0;
else
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0),
US_BBB_RESET, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT*5);
+
if((result < 0) && (us->pusb_dev->status & USB_ST_STALLED))
{
USB_STOR_PRINTF("RESET:stall\n");
return -1;
}
+
/* long wait for reset */
wait_ms(150);
USB_STOR_PRINTF("BBB_reset result %d: status %X reset\n",result,us->pusb_dev->status);
retry = 0;
again:
USB_STOR_PRINTF("STATUS phase\n");
- result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE, &actlen, USB_CNTL_TIMEOUT*5);
+ result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE,
+ &actlen, USB_CNTL_TIMEOUT*5);
+
/* special handling of STALL in STATUS phase */
if((result < 0) && (retry < 1) && (us->pusb_dev->status & USB_ST_STALLED)) {
USB_STOR_PRINTF("STATUS:stall\n");
static int usb_inquiry(ccb *srb,struct us_data *ss)
{
int retry,i;
- retry=3;
+ retry=5;
do {
memset(&srb->cmd[0],0,12);
srb->cmd[0]=SCSI_INQUIRY;
static int usb_test_unit_ready(ccb *srb,struct us_data *ss)
{
- int retries=10;
+ int retries = 10;
do {
memset(&srb->cmd[0],0,12);
static int usb_read_capacity(ccb *srb,struct us_data *ss)
{
int retry;
- retry=2; /* retries */
+ retry = 3; /* retries */
do {
memset(&srb->cmd[0],0,12);
srb->cmd[0]=SCSI_RD_CAPAC;
int protocol = 0;
int subclass = 0;
-
- memset(ss, 0, sizeof(struct us_data));
-
/* let's examine the device now */
iface = &dev->config.if_desc[ifnum];
return 0;
}
+ memset(ss, 0, sizeof(struct us_data));
+
/* At this point, we know we've got a live one */
USB_STOR_PRINTF("\n\nUSB Mass Storage device detected\n");
unsigned char perq,modi;
unsigned long cap[2];
unsigned long *capacity,*blksz;
- ccb *pccb=&usb_ccb;
-
- /* For some mysterious reason the 256MB flash disk of Ours Technology, Inc
- * doesn't survive this reset */
- if (dev->descriptor.idVendor != 0xea0 || dev->descriptor.idProduct != 0x6828)
+ ccb *pccb = &usb_ccb;
+
+ /* for some reasons a couple of devices would not survive this reset */
+ if (
+ /* Sony USM256E */
+ (dev->descriptor.idVendor == 0x054c &&
+ dev->descriptor.idProduct == 0x019e)
+
+ ||
+ /* USB007 Mini-USB2 Flash Drive */
+ (dev->descriptor.idVendor == 0x066f &&
+ dev->descriptor.idProduct == 0x2010)
+ )
+ USB_STOR_PRINTF("usb_stor_get_info: skipping RESET..\n");
+ else
ss->transport_reset(ss);
- pccb->pdata=usb_stor_buf;
- dev_desc->target=dev->devnum;
- pccb->lun=dev_desc->lun;
+ pccb->pdata = usb_stor_buf;
+
+ dev_desc->target = dev->devnum;
+ pccb->lun = dev_desc->lun;
USB_STOR_PRINTF(" address %d\n",dev_desc->target);
if(usb_inquiry(pccb,ss))
return -1;
- perq=usb_stor_buf[0];
- modi=usb_stor_buf[1];
- if((perq & 0x1f)==0x1f) {
+
+ perq = usb_stor_buf[0];
+ modi = usb_stor_buf[1];
+ if((perq & 0x1f) == 0x1f) {
return 0; /* skip unknown devices */
}
- if((modi&0x80)==0x80) {/* drive is removable */
- dev_desc->removable=1;
+ if((modi&0x80) == 0x80) {/* drive is removable */
+ dev_desc->removable = 1;
}
memcpy(&dev_desc->vendor[0], &usb_stor_buf[8], 8);
memcpy(&dev_desc->product[0], &usb_stor_buf[16], 16);
memcpy(&dev_desc->revision[0], &usb_stor_buf[32], 4);
- dev_desc->vendor[8]=0;
- dev_desc->product[16]=0;
- dev_desc->revision[4]=0;
+ dev_desc->vendor[8] = 0;
+ dev_desc->product[16] = 0;
+ dev_desc->revision[4] = 0;
USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]);
if(usb_test_unit_ready(pccb,ss)) {
printf("Device NOT ready\n Request Sense returned %02X %02X %02X\n",pccb->sense_buf[2],pccb->sense_buf[12],pccb->sense_buf[13]);
- if(dev_desc->removable==1) {
- dev_desc->type=perq;
+ if(dev_desc->removable == 1) {
+ dev_desc->type = perq;
return 1;
}
else
return 0;
}
- pccb->pdata=(unsigned char *)&cap[0];
+ pccb->pdata = (unsigned char *)&cap[0];
memset(pccb->pdata,0,8);
- if(usb_read_capacity(pccb,ss)!=0) {
+ if(usb_read_capacity(pccb,ss) != 0) {
printf("READ_CAP ERROR\n");
- cap[0]=2880;
- cap[1]=0x200;
+ cap[0] = 2880;
+ cap[1] = 0x200;
}
USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n",cap[0],cap[1]);
#if 0
(((unsigned long)(cap[1]) & (unsigned long)0xff000000UL) >> 24) ));
#endif
/* this assumes bigendian! */
- cap[0]+=1;
- capacity=&cap[0];
- blksz=&cap[1];
+ cap[0] += 1;
+ capacity = &cap[0];
+ blksz = &cap[1];
USB_STOR_PRINTF("Capacity = 0x%lx, blocksz = 0x%lx\n",*capacity,*blksz);
- dev_desc->lba=*capacity;
- dev_desc->blksz=*blksz;
- dev_desc->type=perq;
+ dev_desc->lba = *capacity;
+ dev_desc->blksz = *blksz;
+ dev_desc->type = perq;
USB_STOR_PRINTF(" address %d\n",dev_desc->target);
USB_STOR_PRINTF("partype: %d\n",dev_desc->part_type);
projects / karo-tx-uboot.git / blobdiff