karo: tx28: don't write u-boot image with WITH_DROP_FFS

[karo-tx-uboot.git] / configs / tx6u-8111_mfg_defconfig

diff --git a/configs/tx6u-8111_mfg_defconfig b/configs/tx6u-8111_mfg_defconfig
index 428ed2a8e78ab5a92c1dfa76e1a93e13fc3318f2..f141f412d53fcabe8e3aea841aa900053f15d7b0 100644 (file)
--- a/configs/tx6u-8111_mfg_defconfig
+++ b/configs/tx6u-8111_mfg_defconfig
@@ -1,29 +1,35 @@
-CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_BUS_WIDTH=32,SYS_LVDS_IF"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_BUS_WIDTH=32,SYS_LVDS_IF,TX6_REV=0x1"
 CONFIG_ARM=y
-CONFIG_SOC_MX6DL=y
+CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TX6=y
-CONFIG_TARGET_TX6U_81X0=y
+CONFIG_TARGET_TX6U_8111=y
 CONFIG_TX6_UBOOT_MFG=y
-CONFIG_CMD_MII=y
+CONFIG_BOOTP_DNS=y
+CONFIG_BOOTP_GATEWAY=y
+CONFIG_BOOTP_SUBNETMASK=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCE=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_CACHE=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MII=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_PING=y
-CONFIG_BOOTP_SUBNETMASK=y
-CONFIG_BOOTP_GATEWAY=y
-CONFIG_BOOTP_DNS=y
-CONFIG_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_FSL_USDHC=y
-CONFIG_NET=y
-CONFIG_NETDEVICES=y
-CONFIG_FEC_MXC=y
-CONFIG_IMX_WATCHDOG=y
-CONFIG_CMD_I2C=y
-CONFIG_NAND=y
-CONFIG_NAND_MXS=y
+CONFIG_CMD_TIME=y
 CONFIG_DOS_PARTITION=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_FEC_MXC=y
 CONFIG_FEC_MXC_PHYADDR=0
-CONFIG_MXC_OCOTP=y
-CONFIG_CMD_FUSE=y
+CONFIG_IMX_WATCHDOG=y
+CONFIG_MMC=y
+CONFIG_NET=y
+CONFIG_NETDEVICES=y
 CONFIG_PHY_SMSC=y
+CONFIG_SYS_PROMPT="TX6DL U-Boot > "