#include <common.h>
#include <command.h>
#include <clps7111.h>
-
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1(void)
-{
- unsigned long value;
-
- __asm__ __volatile__(
- "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
- : "=r" (value)
- :
- : "memory");
- /* printf("p15/c1 is = %08lx\n", value); */
- return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1(unsigned long value)
-{
- /* printf("write %08lx to p15/c1\n", value); */
- __asm__ __volatile__(
- "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
- :
- : "r" (value)
- : "memory");
-
- read_p15_c1();
-}
-
-static void cp_delay (void)
-{
- volatile int i;
-
- /* copro seems to need some delay between reading and writing */
- for (i = 0; i < 100; i++);
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU (1<<0) /* mmu off/on */
-#define C1_ALIGN (1<<1) /* alignment faults off/on */
-#define C1_IDC (1<<2) /* icache and/or dcache off/on */
-#define C1_WRITE_BUFFER (1<<3) /* write buffer off/on */
-#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
-#define C1_SYS_PROT (1<<8) /* system protection */
-#define C1_ROM_PROT (1<<9) /* ROM protection */
-#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
+#include <asm/hardware.h>
int cpu_init (void)
{
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
- IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
return 0;
* and we set the CPU-speed to 73 MHz - see start.S for details
*/
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
unsigned long i;
disable_interrupts ();
/* flush I-cache */
asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
-
#ifdef CONFIG_ARM7_REVD
/* go to high speed */
IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73;
+#endif
+#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292)
+ disable_interrupts ();
+ /* Nothing more needed */
+#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+ /* No cleanup before linux for IntegratorAP/CM720T as yet */
+#else
+#error No cleanup_before_linux() defined for this CPU type
#endif
return 0;
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- extern void reset_cpu (ulong addr);
-
disable_interrupts ();
reset_cpu (0);
/*NOTREACHED*/
return (0);
}
+/*
+ * Instruction and Data cache enable and disable functions
+ *
+ */
+
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1(void)
+{
+ unsigned long value;
+
+ __asm__ __volatile__(
+ "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
+ : "=r" (value)
+ :
+ : "memory");
+ /* printf("p15/c1 is = %08lx\n", value); */
+ return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1(unsigned long value)
+{
+ /* printf("write %08lx to p15/c1\n", value); */
+ __asm__ __volatile__(
+ "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
+ :
+ : "r" (value)
+ : "memory");
+
+ read_p15_c1();
+}
+
+static void cp_delay (void)
+{
+ volatile int i;
+
+ /* copro seems to need some delay between reading and writing */
+ for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU (1<<0) /* mmu off/on */
+#define C1_ALIGN (1<<1) /* alignment faults off/on */
+#define C1_IDC (1<<2) /* icache and/or dcache off/on */
+#define C1_WRITE_BUFFER (1<<3) /* write buffer off/on */
+#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
+#define C1_SYS_PROT (1<<8) /* system protection */
+#define C1_ROM_PROT (1<<9) /* ROM protection */
+#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
+
void icache_enable (void)
{
ulong reg;
{
return (read_p15_c1 () & C1_IDC) != 0;
}
+
+#elif defined(CONFIG_S3C4510B)
+
+void icache_enable (void)
+{
+ s32 i;
+
+ /* disable all cache bits */
+ CLR_REG( REG_SYSCFG, 0x3F);
+
+ /* 8KB cache, write enable */
+ SET_REG( REG_SYSCFG, CACHE_WRITE_BUFF | CACHE_MODE_01);
+
+ /* clear TAG RAM bits */
+ for ( i = 0; i < 256; i++)
+ PUT_REG( CACHE_TAG_RAM + 4*i, 0x00000000);
+
+ /* clear SET0 RAM */
+ for(i=0; i < 1024; i++)
+ PUT_REG( CACHE_SET0_RAM + 4*i, 0x00000000);
+
+ /* clear SET1 RAM */
+ for(i=0; i < 1024; i++)
+ PUT_REG( CACHE_SET1_RAM + 4*i, 0x00000000);
+
+ /* enable cache */
+ SET_REG( REG_SYSCFG, CACHE_ENABLE);
+
+}
+
+void icache_disable (void)
+{
+ /* disable all cache bits */
+ CLR_REG( REG_SYSCFG, 0x3F);
+}
+
+int icache_status (void)
+{
+ return GET_REG( REG_SYSCFG) & CACHE_ENABLE;
+}
+
+void dcache_enable (void)
+{
+ /* we don't have seperate instruction/data caches */
+ icache_enable();
+}
+
+void dcache_disable (void)
+{
+ /* we don't have seperate instruction/data caches */
+ icache_disable();
+}
+
+int dcache_status (void)
+{
+ /* we don't have seperate instruction/data caches */
+ return icache_status();
+}
+
+#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+ /* No specific cache setup for IntegratorAP/CM720T as yet */
+ void icache_enable (void)
+ {
+ }
+#elif defined(CONFIG_LPC2292) /* just to satisfy the compiler */
+#else
+#error No icache/dcache enable/disable functions defined for this CPU type
+#endif
projects / karo-tx-uboot.git / blobdiff