karo: tx6ul: configure JTAG_* pads for JTAG function unless disabled by env. variable

[karo-tx-uboot.git] / doc / README.m68k

diff --git a/doc/README.m68k b/doc/README.m68k
index e6c33a7d960c3c70d593a95207c477fdc5caeffa..c85febc1f1fb3447c8fbc82579cc1a5cd6fd59cb 100644 (file)
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -31,12 +31,12 @@ hopefully added soon!
 
 2.1 Motorola Coldfire MCF5272
 -----------------------------
-CPU specific code is located in: cpu/mcf52x2
+CPU specific code is located in: arch/m68k/cpu/mcf52x2
 
 
 2.1 Motorola Coldfire MCF5282
 -----------------------------
-CPU specific code is located in: cpu/mcf52x2
+CPU specific code is located in: arch/m68k/cpu/mcf52x2
 
 The MCF5282 Port no longer needs a preloader and can place in external or
 internal FLASH.
@@ -72,7 +72,7 @@ For the preloader, please see
 http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
 
 U-boot is configured to run at 0x20000 at default. This can be configured by
-change TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
+change CONFIG_SYS_TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
 include/configs/M5282EVB.h.
 
 3.2 BuS EB+MCF-EV123
@@ -96,7 +96,7 @@ CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the
 initial vector table and basic processor initialization will not
 be compiled in. The start address of u-boot must be adjusted in
 the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile
-(TEXT_BASE) to the load address.
+(CONFIG_SYS_TEXT_BASE) to the load address.
 
 4.1 MCF5272 specific Options/Settings
 -------------------------------------
@@ -111,7 +111,7 @@ CONFIG_SYS_MBAR     -- defines the base address of the MCF5272 configuration registe
 CONFIG_SYS_INIT_RAM_ADDR
                -- defines the base address of the MCF5272 internal SRAM
 CONFIG_SYS_ENET_BD_BASE
-               -- defines the base addres of the FEC buffer descriptors
+               -- defines the base address of the FEC buffer descriptors
 
 CONFIG_SYS_SCR         -- defines the contents of the System Configuration Register
 CONFIG_SYS_SPR         -- defines the contents of the System Protection Register
@@ -138,7 +138,7 @@ CONFIG_SYS_INIT_RAM_ADDR
 CONFIG_SYS_INT_FLASH_BASE
                -- defines the base address of the MCF5282 internal Flash memory
 CONFIG_SYS_ENET_BD_BASE
-               -- defines the base addres of the FEC buffer descriptors
+               -- defines the base address of the FEC buffer descriptors
 
 CONFIG_SYS_MFD
                -- defines the PLL Multiplication Factor Devider