net: fec: use correct sizes to clear and flush descriptors

[karo-tx-uboot.git] / doc / README.marubun-pcmcia

diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
index 3ed5cd33c4b775835ad55f4faf984821c72d39cd..d3563a3cd9993a712fe4e904aa1fa4c31912b0f7 100644 (file)
--- a/doc/README.marubun-pcmcia
+++ b/doc/README.marubun-pcmcia
@@ -19,7 +19,7 @@ U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
 
 1. base source code
     The code is based on sources from the Linux kernel
-       ( arch/sh/kernel/cf-enabler.c ).
+       ( arch/sh/kernel/cf-enabler.c ).
 
 2. How to use
     The options you have to specify in the config file are (with the
@@ -27,34 +27,34 @@ U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
 
     * CONFIG_MARUBUN_PCCARD
        If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
-       ex.     #define CONFIG_MARUBUN_PCCARD
+       ex.     #define CONFIG_MARUBUN_PCCARD
 
     * CONFIG_PCMCIA_SLOT_A
-       Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
+       Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
        ex.     #define CONFIG_PCMCIA_SLOT_A    1
 
-    * CFG_MARUBUN_MRSHPC
-       This is MR-SHPC-01 PCMCIA controler base address.
+    * CONFIG_SYS_MARUBUN_MRSHPC
+       This is MR-SHPC-01 PCMCIA controler base address.
        You should do the setting matched to your environment.
-       ex.  #define CFG_MARUBUN_MRSHPC 0xb03fffe0
+       ex.  #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0
             ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
        This is MR-SHPC-01 memory window base address.
        You should do the setting matched to your environment.
-       ex. #define CFG_MARUBUN_MW1 0xb0400000
+       ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000
             ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
        This is MR-SHPC-01 attribute window base address.
        You should do the setting matched to your environment.
-       ex. #define CFG_MARUBUN_MW2 0xb0500000
+       ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000
             ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
        This is MR-SHPC-01 I/O window base address.
        You should do the setting matched to your environment.
-       ex. #define CFG_MARUBUN_IO  0xb0600000
+       ex. #define CONFIG_SYS_MARUBUN_IO  0xb0600000
             ( for MS7722SE01 environment )
 
 3. Other