Merge branch 'master' of git://git.denx.de/u-boot-arm into master

[karo-tx-uboot.git] / doc / README.mxsimage

diff --git a/doc/README.mxsimage b/doc/README.mxsimage
index 88a2caf3e62ab8bb7600ee6f1176d9bcec230a8a..0d31cba1fb5a3ed7b6d0a12000bb2bc9e0d9e4ab 100644 (file)
--- a/doc/README.mxsimage
+++ b/doc/README.mxsimage
@@ -10,7 +10,7 @@ The mxsimage tool is targeted to be a simple replacement for the elftosb2 .
 To generate an image, write an image configuration file and run:
 
  mkimage -A arm -O u-boot -T mxsimage -n <path to configuration file> \
-         <output bootstream file>
+        <output bootstream file>
 
 The output bootstream file is usually using the .sb file extension. Note
 that the example configuration files for producing bootable BootStream with
@@ -54,33 +54,33 @@ These semantics and rules will be outlined now.
 
       LOAD     u32_address string_filename
       - Instructs the BootROM to load file pointed by "string_filename" onto
-        address "u32_address".
+       address "u32_address".
 
       LOAD IVT u32_address u32_IVT_entry_point
       - Crafts and loads IVT onto address "u32_address" with the entry point
-        of u32_IVT_entry_point.
+       of u32_IVT_entry_point.
       - i.MX28-specific instruction!
 
       LOAD DCD u32_address u32_DCD_block_ID
       - Loads the DCD block with ID "u32_DCD_block_ID" onto address
-        "u32_address" and executes the contents of this DCD block
+       "u32_address" and executes the contents of this DCD block
       - i.MX28-specific instruction!
 
       FILL u32_address u32_pattern u32_length
       - Starts to write memory from addres "u32_address" with a pattern
-        specified by "u32_pattern". Writes exactly "u32_length" bytes of the
+       specified by "u32_pattern". Writes exactly "u32_length" bytes of the
        pattern.
 
       JUMP [HAB] u32_address [u32_r0_arg]
       - Jumps onto memory address specified by "u32_address" by setting this
-        address in PT. The BootROM will pass the "u32_r0_arg" value in ARM
+       address in PT. The BootROM will pass the "u32_r0_arg" value in ARM
        register "r0" to the executed code if this option is specified.
        Otherwise, ARM register "r0" will default to value 0x00000000. The
        optional "HAB" flag is i.MX28-specific flag turning on the HAB boot.
 
       CALL [HAB] u32_address [u32_r0_arg]
       - See JUMP instruction above, as the operation is exactly the same with
-        one difference. The CALL instruction does allow returning into the
+       one difference. The CALL instruction does allow returning into the
        BootROM from the executed code. U-Boot makes use of this in it's SPL
        code.
 
@@ -88,10 +88,10 @@ These semantics and rules will be outlined now.
       - Restart the CPU and start booting from device specified by the
        "string_mode" argument. The "string_mode" differs for each CPU
        and can be:
-         i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH
-                               JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1
-         i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH
-                               JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1
+        i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH
+                              JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1
+        i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH
+                              JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1
 
   - An optional "DCD" blocks can be added at the begining of the configuration
     file. Note that the DCD is only supported on i.MX28.
@@ -99,7 +99,7 @@ These semantics and rules will be outlined now.
       configuration file.
     - The DCD block has the following semantics:
 
-        DCD u32_DCD_block_ID
+       DCD u32_DCD_block_ID
        - u32_DCD_block_ID      :: The ID number of the DCD block, must match
                                   the ID number used by "LOAD DCD" instruction.