Merge branch 'master' of git://git.denx.de/u-boot-nds32

[karo-tx-uboot.git] / doc / README.ppc440

diff --git a/doc/README.ppc440 b/doc/README.ppc440
index 0a5f99fb1343013c60f0ba47fd7ea7a5329195d9..dd8ccaad0e7ae32ef25636faa4403c44143047c0 100644 (file)
--- a/doc/README.ppc440
+++ b/doc/README.ppc440
@@ -77,18 +77,12 @@ This is controlled with the CONFIG_SYS_EXT_SERIAL_CLOCK flag. When using
 internal clocking, the "ideal baud rate" settings in the 440GP
 user manual are automatically calculated.
 
-CONFIG_SERIAL_SOFTWARE_FIFO enables interrupt-driven serial operation.
-But the last time I checked, interrupts were initialized after the
-serial port causing the interrupt handler to be removed from the
-handler table. This will probably be fixed soon ... or fix it
-yourself and submit a patch :-)
-
 
 I2C
 =================
 
 The i2c utilities have been tested on both Rev B. and Rev C. and
-look good. The iprobe command implementation has been updated to
+look good. The 'i2c probe' command implementation has been updated to
 allow for 'skipped' addresses. Some i2c slaves are write only and
 cause problems when a probe (read) is performed (for example the
 CDCV850 clock controller at address 0x69 on the ebony board).
@@ -97,7 +91,7 @@ To prevent probing certain addresses you can define the
 CONFIG_SYS_I2C_NOPROBES macro in your board-specific header file. When
 defined, all specified addresses are skipped during a probe.
 The addresses that are skipped will be displayed in the output
-of the iprobe command.
+of the 'i2c probe' command.
 
 For example, to prevent probing address 0x69, define the macro as
 follows: