tpm: Move the I2C TPM code into one file

[karo-tx-uboot.git] / doc / README.spear

diff --git a/doc/README.spear b/doc/README.spear
index a8b105244991164212d73a141d61c2584f80de0b..0789b3fd270ba15c8ab215a2a044ac5a1b2c832b 100644 (file)
--- a/doc/README.spear
+++ b/doc/README.spear
@@ -6,9 +6,10 @@ SPEAr600 is also known as SPEArPlus and SPEAr300 is also known as SPEArBasic
 The SPEAr SoC family embeds a customizable logic that can be programmed
 one-time by a customer at silicon mask level (i.e. not at runtime!).
 
-We are now adding the support in u-boot for two SoC: SPEAr600 and SPEAr3xx.
+U-Boot supports four SoCs: SPEAr600, SPEAr3xx
 
-All 4 SoCs share common peripherals.
+All 4 SoCs (SPEAr3xx and SPEAr600) share common peripherals. SPEAr300 and
+SPEAr600 do not have EMI.
 
 1. ARM926ejs core based (sp600 has two cores, the 2nd handled only in Linux)
 2. FastEthernet (sp600 has Gbit version, but same controller - GMAC)
@@ -22,7 +23,7 @@ All 4 SoCs share common peripherals.
 10. others ..
 
 Everything is supported in Linux.
-u-boot is not currently supporting all peripeharls (just a few as listed below).
+u-boot is currently not supporting all peripeharls (just a few as listed below).
 1. USB Device
 2. NAND controller (FSMC)
 3. Serial Memory Interface
@@ -31,18 +32,43 @@ u-boot is not currently supporting all peripeharls (just a few as listed below).
 5. UART
 
 Build options
-       make spear600_config
+       make spear320_config
+               spear320 build with environment variables placed at default
+               location i.e. Serial NOR device
+       make spear320_pnor_config
+               This option generates a uboot image that supports emi controller
+               for CFI compliant parallel NOR flash. Environment variables are
+               placed in Parallel NOR device
+       make spear320_nand_config
+               spear320 build with environment variables placed in NAND device
+       make spear320_usbtty_config
+               spear320 build with usbtty terminal as default and environment
+               placed at default location
+       make spear320_usbtty_pnor_config
+               spear320 build with usbtty terminal as default and environment
+               placed in pnor device
+       make spear320_usbtty_nand_config
+               Build with usbtty terminal as default and environment placed in
+               NAND device
        make spear300_config
+       make spear300_nand_config
+       make spear300_usbtty_config
+       make spear300_usbtty_nand_config
        make spear310_config
-       make spear320_config
-
-Further options
-       make ENV=NAND (supported by all 4 SoCs)
-       - This option generates a uboot image that saves environment inn NAND
+       make spear310_pnor_config
+       make spear310_nand_config
+       make spear310_usbtty_config
+       make spear310_usbtty_pnor_config
+       make spear310_usbtty_nand_config
+       make spear600_config
+       make spear600_nand_config
+       make spear600_usbtty_config
+       make spear600_usbtty_nand_config
 
-       make CONSOLE=USB (supported by all 4 SoCs)
-       - This option generates a uboot image for using usbdevice as a tty i/f
+Mac id storage and retrieval in spear platforms
 
-       make FLASH=PNOR (supported by SPEAr310 and SPEAr320)
-       - This option generates a uboot image that supports emi controller for
-       CFI compliant parallel NOR flash
+Please read doc/README.enetaddr for the implementation guidelines for mac id
+usage. Basically, environment has precedence over board specific storage. The
+ethaddr beeing used for the network interface is always taken only from
+environment variables. Although, we can check the mac id programmed in i2c
+memory by using chip_config command