* (C) Copyright 2012 SAMSUNG Electronics
* Jaehoon Chung <jh80.chung@samsung.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <sdhci.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <asm/gpio.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/clk.h>
+#include <errno.h>
+#include <asm/arch/pinmux.h>
static char *S5P_NAME = "SAMSUNG SDHCI";
static void s5p_sdhci_set_control_reg(struct sdhci_host *host)
sdhci_writel(host, SDHCI_CTRL4_DRIVE_MASK(0x3), SDHCI_CONTROL4);
val = sdhci_readl(host, SDHCI_CONTROL2);
- val &= SDHCI_CTRL2_SELBASECLK_SHIFT;
+ val &= SDHCI_CTRL2_SELBASECLK_MASK(3);
val |= SDHCI_CTRL2_ENSTAASYNCCLR |
SDHCI_CTRL2_ENCMDCNFMSK |
* 00 = Delay3 (inverter delay)
* 10 = Delay4 (inverter delay + 2ns)
*/
- val = SDHCI_CTRL3_FCSEL3 | SDHCI_CTRL3_FCSEL1;
+ val = SDHCI_CTRL3_FCSEL0 | SDHCI_CTRL3_FCSEL1;
sdhci_writel(host, val, SDHCI_CONTROL3);
/*
sdhci_writel(host, ctrl, SDHCI_CONTROL2);
}
-int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks)
+static int s5p_sdhci_core_init(struct sdhci_host *host)
{
- struct sdhci_host *host = NULL;
- host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
+ host->name = S5P_NAME;
+
+ host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
+ SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8;
+ host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+ host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+
+ host->set_control_reg = &s5p_sdhci_set_control_reg;
+ host->set_clock = set_mmc_clk;
+
+ if (host->bus_width == 8)
+ host->host_caps |= MMC_MODE_8BIT;
+
+ return add_sdhci(host, 52000000, 400000);
+}
+
+int s5p_sdhci_init(u32 regbase, int index, int bus_width)
+{
+ struct sdhci_host *host = malloc(sizeof(struct sdhci_host));
if (!host) {
printf("sdhci__host malloc fail!\n");
return 1;
}
-
- host->name = S5P_NAME;
host->ioaddr = (void *)regbase;
- host->quirks = quirks;
+ host->index = index;
+ host->bus_width = bus_width;
- host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE;
- host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
- if (quirks & SDHCI_QUIRK_REG32_RW)
- host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16;
- else
- host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+ return s5p_sdhci_core_init(host);
+}
- host->set_control_reg = &s5p_sdhci_set_control_reg;
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
+
+static int do_sdhci_init(struct sdhci_host *host)
+{
+ int dev_id, flag;
+ int err = 0;
+
+ flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
+ dev_id = host->index + PERIPH_ID_SDMMC0;
+
+ if (dm_gpio_is_valid(&host->pwr_gpio)) {
+ dm_gpio_set_value(&host->pwr_gpio, 1);
+ err = exynos_pinmux_config(dev_id, flag);
+ if (err) {
+ debug("MMC not configured\n");
+ return err;
+ }
+ }
+
+ if (dm_gpio_is_valid(&host->cd_gpio)) {
+ if (dm_gpio_get_value(&host->cd_gpio))
+ return -ENODEV;
+
+ err = exynos_pinmux_config(dev_id, flag);
+ if (err) {
+ printf("external SD not configured\n");
+ return err;
+ }
+ }
+
+ return s5p_sdhci_core_init(host);
+}
+
+static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
+{
+ int bus_width, dev_id;
+ unsigned int base;
+
+ /* Get device id */
+ dev_id = pinmux_decode_periph_id(blob, node);
+ if (dev_id < PERIPH_ID_SDMMC0 && dev_id > PERIPH_ID_SDMMC3) {
+ debug("MMC: Can't get device id\n");
+ return -1;
+ }
+ host->index = dev_id - PERIPH_ID_SDMMC0;
+
+ /* Get bus width */
+ bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+ if (bus_width <= 0) {
+ debug("MMC: Can't get bus-width\n");
+ return -1;
+ }
+ host->bus_width = bus_width;
+
+ /* Get the base address from the device node */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (!base) {
+ debug("MMC: Can't get base address\n");
+ return -1;
+ }
+ host->ioaddr = (void *)base;
+
+ gpio_request_by_name_nodev(blob, node, "pwr-gpios", 0, &host->pwr_gpio,
+ GPIOD_IS_OUT);
+ gpio_request_by_name_nodev(blob, node, "cd-gpios", 0, &host->cd_gpio,
+ GPIOD_IS_IN);
+
+ return 0;
+}
+
+static int process_nodes(const void *blob, int node_list[], int count)
+{
+ struct sdhci_host *host;
+ int i, node;
+
+ debug("%s: count = %d\n", __func__, count);
+
+ /* build sdhci_host[] for each controller */
+ for (i = 0; i < count; i++) {
+ node = node_list[i];
+ if (node <= 0)
+ continue;
+
+ host = &sdhci_host[i];
+
+ if (sdhci_get_config(blob, node, host)) {
+ printf("%s: failed to decode dev %d\n", __func__, i);
+ return -1;
+ }
+ do_sdhci_init(host);
+ }
+ return 0;
+}
+
+int exynos_mmc_init(const void *blob)
+{
+ int count;
+ int node_list[SDHCI_MAX_HOSTS];
+
+ count = fdtdec_find_aliases_for_id(blob, "mmc",
+ COMPAT_SAMSUNG_EXYNOS_MMC, node_list,
+ SDHCI_MAX_HOSTS);
- host->host_caps = MMC_MODE_HC;
+ process_nodes(blob, node_list, count);
- add_sdhci(host, max_clk, min_clk);
return 0;
}
+#endif
projects / karo-tx-uboot.git / blobdiff