#include <nand.h>
#include <linux/err.h>
#include <asm/io.h>
-#ifdef CONFIG_MX27
+#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) || \
+ defined(CONFIG_MX51) || defined(CONFIG_MX53)
#include <asm/arch/imx-regs.h>
#endif
+#include "mxc_nand.h"
#define DRIVER_NAME "mxc_nand"
-struct nfc_regs {
-/* NFC RAM BUFFER Main area 0 */
- uint8_t main_area0[0x200];
- uint8_t main_area1[0x200];
- uint8_t main_area2[0x200];
- uint8_t main_area3[0x200];
-/* SPARE BUFFER Spare area 0 */
- uint8_t spare_area0[0x10];
- uint8_t spare_area1[0x10];
- uint8_t spare_area2[0x10];
- uint8_t spare_area3[0x10];
- uint8_t pad[0x5c0];
-/* NFC registers */
- uint16_t nfc_buf_size;
- uint16_t reserved;
- uint16_t nfc_buf_addr;
- uint16_t nfc_flash_addr;
- uint16_t nfc_flash_cmd;
- uint16_t nfc_config;
- uint16_t nfc_ecc_status_result;
- uint16_t nfc_rsltmain_area;
- uint16_t nfc_rsltspare_area;
- uint16_t nfc_wrprot;
- uint16_t nfc_unlockstart_blkaddr;
- uint16_t nfc_unlockend_blkaddr;
- uint16_t nfc_nf_wrprst;
- uint16_t nfc_config1;
- uint16_t nfc_config2;
-};
-
-/*
- * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Command operation
- */
-#define NFC_CMD 0x1
-
-/*
- * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Address operation
- */
-#define NFC_ADDR 0x2
-
-/*
- * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register
- * for Input operation
- */
-#define NFC_INPUT 0x4
-
-/*
- * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register
- * for Data Output operation
- */
-#define NFC_OUTPUT 0x8
-
-/*
- * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register
- * for Read ID operation
- */
-#define NFC_ID 0x10
-
-/*
- * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register
- * for Read Status operation
- */
-#define NFC_STATUS 0x20
-
-/*
- * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read
- * Status operation
- */
-#define NFC_INT 0x8000
-
-#define NFC_SP_EN (1 << 2)
-#define NFC_ECC_EN (1 << 3)
-#define NFC_BIG (1 << 5)
-#define NFC_RST (1 << 6)
-#define NFC_CE (1 << 7)
-#define NFC_ONE_CYCLE (1 << 8)
-
-typedef enum {false, true} bool;
-
struct mxc_nand_host {
- struct mtd_info mtd;
- struct nand_chip *nand;
-
- struct nfc_regs __iomem *regs;
- int spare_only;
- int status_request;
- int pagesize_2k;
- int clk_act;
- uint16_t col_addr;
+ struct mtd_info mtd;
+ struct nand_chip *nand;
+
+ struct mxc_nand_regs __iomem *regs;
+#ifdef MXC_NFC_V3_2
+ struct mxc_nand_ip_regs __iomem *ip_regs;
+#endif
+ int spare_only;
+ int status_request;
+ int pagesize_2k;
+ int clk_act;
+ uint16_t col_addr;
+ unsigned int page_addr;
};
static struct mxc_nand_host mxc_host;
#define SPARE_SINGLEBIT_ERROR 0x1
/* OOB placement block for use with hardware ecc generation */
-#ifdef CONFIG_MXC_NAND_HWECC
+#if defined(MXC_NFC_V1)
+#ifndef CONFIG_SYS_NAND_LARGEPAGE
static struct nand_ecclayout nand_hw_eccoob = {
.eccbytes = 5,
.eccpos = {6, 7, 8, 9, 10},
- .oobfree = {{0, 5}, {11, 5}, }
+ .oobfree = { {0, 5}, {11, 5}, }
};
#else
-static struct nand_ecclayout nand_soft_eccoob = {
- .eccbytes = 6,
- .eccpos = {6, 7, 8, 9, 10, 11},
- .oobfree = {{0, 5}, {12, 4}, }
+static struct nand_ecclayout nand_hw_eccoob2k = {
+ .eccbytes = 20,
+ .eccpos = {
+ 6, 7, 8, 9, 10,
+ 22, 23, 24, 25, 26,
+ 38, 39, 40, 41, 42,
+ 54, 55, 56, 57, 58,
+ },
+ .oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} },
};
#endif
-
-static struct nand_ecclayout nand_hw_eccoob_largepage = {
- .eccbytes = 20,
- .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
- 38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
- .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
+#ifndef CONFIG_SYS_NAND_LARGEPAGE
+static struct nand_ecclayout nand_hw_eccoob = {
+ .eccbytes = 9,
+ .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
+ .oobfree = { {2, 5} }
};
+#else
+static struct nand_ecclayout nand_hw_eccoob2k = {
+ .eccbytes = 36,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ },
+ .oobfree = { {2, 5}, {16, 7}, {32, 7}, {48, 7} },
+};
+#endif
+#endif
-#ifdef CONFIG_MX27
-static int is_16bit_nand(void)
-{
- struct system_control_regs *sc_regs =
- (struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
-
- if (readl(&sc_regs->fmcr) & NF_16BIT_SEL)
- return 1;
- else
- return 0;
-}
-#elif defined(CONFIG_MX31)
static int is_16bit_nand(void)
{
- struct clock_control_regs *sc_regs =
- (struct clock_control_regs *)CCM_BASE;
-
- if (readl(&sc_regs->rcsr) & CCM_RCSR_NF16B)
- return 1;
- else
- return 0;
-}
+#if defined(CONFIG_SYS_NAND_BUSWIDTH_16BIT)
+ return 1;
#else
-#warning "8/16 bit NAND autodetection not supported"
-static int is_16bit_nand(void)
-{
return 0;
-}
#endif
+}
static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size)
{
/*
* This function polls the NANDFC to wait for the basic operation to
- * complete by checking the INT bit of config2 register.
+ * complete by checking the INT bit.
*/
static void wait_op_done(struct mxc_nand_host *host, int max_retries,
uint16_t param)
uint32_t tmp;
while (max_retries-- > 0) {
- if (readw(&host->regs->nfc_config2) & NFC_INT) {
- tmp = readw(&host->regs->nfc_config2);
- tmp &= ~NFC_INT;
- writew(tmp, &host->regs->nfc_config2);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+ tmp = readnfc(&host->regs->config2);
+ if (tmp & NFC_V1_V2_CONFIG2_INT) {
+ tmp &= ~NFC_V1_V2_CONFIG2_INT;
+ writenfc(tmp, &host->regs->config2);
+#elif defined(MXC_NFC_V3_2)
+ tmp = readnfc(&host->ip_regs->ipc);
+ if (tmp & NFC_V3_IPC_INT) {
+ tmp &= ~NFC_V3_IPC_INT;
+ writenfc(tmp, &host->ip_regs->ipc);
+#endif
break;
}
udelay(1);
{
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);
- writew(cmd, &host->regs->nfc_flash_cmd);
- writew(NFC_CMD, &host->regs->nfc_config2);
+ writenfc(cmd, &host->regs->flash_cmd);
+ writenfc(NFC_CMD, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, cmd);
{
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr);
- writew(addr, &host->regs->nfc_flash_addr);
- writew(NFC_ADDR, &host->regs->nfc_config2);
+ writenfc(addr, &host->regs->flash_addr);
+ writenfc(NFC_ADDR, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, addr);
}
/*
- * This function requests the NANDFC to initate the transfer
+ * This function requests the NANDFC to initiate the transfer
* of data currently in the NANDFC RAM buffer to the NAND device.
*/
static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
int spare_only)
{
- MTDDEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
+ if (spare_only)
+ MTDDEBUG(MTD_DEBUG_LEVEL1, "send_prog_page (%d)\n", spare_only);
+
+ if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
+ int i;
+ /*
+ * The controller copies the 64 bytes of spare data from
+ * the first 16 bytes of each of the 4 64 byte spare buffers.
+ * Copy the contiguous data starting in spare_area[0] to
+ * the four spare area buffers.
+ */
+ for (i = 1; i < 4; i++) {
+ void __iomem *src = &host->regs->spare_area[0][i * 16];
+ void __iomem *dst = &host->regs->spare_area[i][0];
+
+ mxc_nand_memcpy32(dst, src, 16);
+ }
+ }
- writew(buf_id, &host->regs->nfc_buf_addr);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+ writenfc(buf_id, &host->regs->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+ uint32_t tmp = readnfc(&host->regs->config1);
+ tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
+ tmp |= NFC_V3_CONFIG1_RBA(buf_id);
+ writenfc(tmp, &host->regs->config1);
+#endif
/* Configure spare or page+spare access */
if (!host->pagesize_2k) {
- uint16_t config1 = readw(&host->regs->nfc_config1);
+ uint32_t config1 = readnfc(&host->regs->config1);
if (spare_only)
- config1 |= NFC_SP_EN;
+ config1 |= NFC_CONFIG1_SP_EN;
else
- config1 &= ~(NFC_SP_EN);
- writew(config1, &host->regs->nfc_config1);
+ config1 &= ~NFC_CONFIG1_SP_EN;
+ writenfc(config1, &host->regs->config1);
}
- writew(NFC_INPUT, &host->regs->nfc_config2);
+ writenfc(NFC_INPUT, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, spare_only);
}
/*
- * Requests NANDFC to initated the transfer of data from the
+ * Requests NANDFC to initiate the transfer of data from the
* NAND device into in the NANDFC ram buffer.
*/
static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
{
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
- writew(buf_id, &host->regs->nfc_buf_addr);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+ writenfc(buf_id, &host->regs->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+ uint32_t tmp = readnfc(&host->regs->config1);
+ tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
+ tmp |= NFC_V3_CONFIG1_RBA(buf_id);
+ writenfc(tmp, &host->regs->config1);
+#endif
/* Configure spare or page+spare access */
if (!host->pagesize_2k) {
- uint32_t config1 = readw(&host->regs->nfc_config1);
+ uint32_t config1 = readnfc(&host->regs->config1);
if (spare_only)
- config1 |= NFC_SP_EN;
+ config1 |= NFC_CONFIG1_SP_EN;
else
- config1 &= ~NFC_SP_EN;
- writew(config1, &host->regs->nfc_config1);
+ config1 &= ~NFC_CONFIG1_SP_EN;
+ writenfc(config1, &host->regs->config1);
}
- writew(NFC_OUTPUT, &host->regs->nfc_config2);
+ writenfc(NFC_OUTPUT, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, spare_only);
+
+ if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
+ int i;
+
+ /*
+ * The controller copies the 64 bytes of spare data to
+ * the first 16 bytes of each of the 4 spare buffers.
+ * Make the data contiguous starting in spare_area[0].
+ */
+ for (i = 1; i < 4; i++) {
+ void __iomem *src = &host->regs->spare_area[i][0];
+ void __iomem *dst = &host->regs->spare_area[0][i * 16];
+
+ mxc_nand_memcpy32(dst, src, 16);
+ }
+ }
}
/* Request the NANDFC to perform a read of the NAND device ID. */
static void send_read_id(struct mxc_nand_host *host)
{
- uint16_t tmp;
+ uint32_t tmp;
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
/* NANDFC buffer 0 is used for device ID output */
- writew(0x0, &host->regs->nfc_buf_addr);
+ writenfc(0x0, &host->regs->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+ tmp = readnfc(&host->regs->config1);
+ tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
+ writenfc(tmp, &host->regs->config1);
+#endif
/* Read ID into main buffer */
- tmp = readw(&host->regs->nfc_config1);
- tmp &= ~NFC_SP_EN;
- writew(tmp, &host->regs->nfc_config1);
+ tmp = readnfc(&host->regs->config1);
+ tmp &= ~NFC_CONFIG1_SP_EN;
+ writenfc(tmp, &host->regs->config1);
- writew(NFC_ID, &host->regs->nfc_config2);
+ writenfc(NFC_ID, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, 0);
*/
static uint16_t get_dev_status(struct mxc_nand_host *host)
{
- void __iomem *main_buf = host->regs->main_area1;
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+ void __iomem *main_buf = host->regs->main_area[1];
uint32_t store;
- uint16_t ret, tmp;
+#endif
+ uint32_t ret, tmp;
/* Issue status request to NAND device */
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
/* store the main area1 first word, later do recovery */
store = readl(main_buf);
/* NANDFC buffer 1 is used for device status */
- writew(1, &host->regs->nfc_buf_addr);
+ writenfc(1, &host->regs->buf_addr);
+#endif
/* Read status into main buffer */
- tmp = readw(&host->regs->nfc_config1);
- tmp &= ~NFC_SP_EN;
- writew(tmp, &host->regs->nfc_config1);
+ tmp = readnfc(&host->regs->config1);
+ tmp &= ~NFC_CONFIG1_SP_EN;
+ writenfc(tmp, &host->regs->config1);
- writew(NFC_STATUS, &host->regs->nfc_config2);
+ writenfc(NFC_STATUS, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, 0);
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
/*
* Status is placed in first word of main buffer
* get status, then recovery area 1 data
*/
ret = readw(main_buf);
writel(store, main_buf);
+#elif defined(MXC_NFC_V3_2)
+ ret = readnfc(&host->regs->config1) >> 16;
+#endif
return ret;
}
return 1;
}
+static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+ uint16_t tmp = readnfc(&host->regs->config1);
+
+ if (on)
+ tmp |= NFC_V1_V2_CONFIG1_ECC_EN;
+ else
+ tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
+ writenfc(tmp, &host->regs->config1);
+#elif defined(MXC_NFC_V3_2)
+ uint32_t tmp = readnfc(&host->ip_regs->config2);
+
+ if (on)
+ tmp |= NFC_V3_CONFIG2_ECC_EN;
+ else
+ tmp &= ~NFC_V3_CONFIG2_ECC_EN;
+ writenfc(tmp, &host->ip_regs->config2);
+#endif
+}
+
#ifdef CONFIG_MXC_NAND_HWECC
static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
*/
}
+#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
+static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ int page)
+{
+ struct mxc_nand_host *host = chip->priv;
+ uint8_t *buf = chip->oob_poi;
+ int length = mtd->oobsize;
+ int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ uint8_t *bufpoi = buf;
+ int i, toread;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL0,
+ "%s: Reading OOB area of page %u to oob %p\n",
+ __func__, page, buf);
+
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
+ for (i = 0; i < chip->ecc.steps; i++) {
+ toread = min_t(int, length, chip->ecc.prepad);
+ if (toread) {
+ chip->read_buf(mtd, bufpoi, toread);
+ bufpoi += toread;
+ length -= toread;
+ }
+ bufpoi += chip->ecc.bytes;
+ host->col_addr += chip->ecc.bytes;
+ length -= chip->ecc.bytes;
+
+ toread = min_t(int, length, chip->ecc.postpad);
+ if (toread) {
+ chip->read_buf(mtd, bufpoi, toread);
+ bufpoi += toread;
+ length -= toread;
+ }
+ }
+ if (length > 0)
+ chip->read_buf(mtd, bufpoi, length);
+
+ _mxc_nand_enable_hwecc(mtd, 0);
+ chip->cmdfunc(mtd, NAND_CMD_READOOB,
+ mtd->writesize + chip->ecc.prepad, page);
+ bufpoi = buf + chip->ecc.prepad;
+ length = mtd->oobsize - chip->ecc.prepad;
+ for (i = 0; i < chip->ecc.steps; i++) {
+ toread = min_t(int, length, chip->ecc.bytes);
+ chip->read_buf(mtd, bufpoi, toread);
+ bufpoi += eccpitch;
+ length -= eccpitch;
+ host->col_addr += chip->ecc.postpad + chip->ecc.prepad;
+ }
+ _mxc_nand_enable_hwecc(mtd, 1);
+ return 1;
+}
+
+static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf,
+ int oob_required,
+ int page)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+ int n;
+
+ _mxc_nand_enable_hwecc(mtd, 0);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+
+ for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
+ host->col_addr = n * eccsize;
+ chip->read_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ host->col_addr = mtd->writesize + n * eccpitch;
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->read_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->read_buf(mtd, oob, size);
+ _mxc_nand_enable_hwecc(mtd, 1);
+
+ return 0;
+}
+
+static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf,
+ int oob_required,
+ int page)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int n, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
+ page, buf, oob);
+
+ /* first read the data area and the available portion of OOB */
+ for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
+ int stat;
+
+ host->col_addr = n * eccsize;
+
+ chip->read_buf(mtd, p, eccsize);
+
+ host->col_addr = mtd->writesize + n * eccpitch;
+
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ /* Calculate remaining oob bytes */
+ n = mtd->oobsize - (oob - chip->oob_poi);
+ if (n)
+ chip->read_buf(mtd, oob, n);
+
+ /* Then switch ECC off and read the OOB area to get the ECC code */
+ _mxc_nand_enable_hwecc(mtd, 0);
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
+ eccsteps = chip->ecc.steps;
+ oob = chip->oob_poi + chip->ecc.prepad;
+ for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
+ host->col_addr = mtd->writesize +
+ n * eccpitch +
+ chip->ecc.prepad;
+ chip->read_buf(mtd, oob, eccbytes);
+ oob += eccbytes + chip->ecc.postpad;
+ }
+ _mxc_nand_enable_hwecc(mtd, 1);
+ return 0;
+}
+
+static int mxc_nand_write_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ int length = mtd->oobsize;
+ int i, len, status, steps = chip->ecc.steps;
+ const uint8_t *bufpoi = chip->oob_poi;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ for (i = 0; i < steps; i++) {
+ len = min_t(int, length, eccpitch);
+
+ chip->write_buf(mtd, bufpoi, len);
+ bufpoi += len;
+ length -= len;
+ host->col_addr += chip->ecc.prepad + chip->ecc.postpad;
+ }
+ if (length > 0)
+ chip->write_buf(mtd, bufpoi, length);
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+static int mxc_nand_write_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf,
+ int oob_required)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+ int n;
+
+ for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
+ host->col_addr = n * eccsize;
+ chip->write_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ host->col_addr = mtd->writesize + n * eccpitch;
+
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ host->col_addr += eccbytes;
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->write_buf(mtd, oob, size);
+ return 0;
+}
+
+static int mxc_nand_write_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf,
+ int oob_required)
+{
+ struct mxc_nand_host *host = chip->priv;
+ int i, n, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsteps = chip->ecc.steps;
+ const uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+ for (i = n = 0;
+ eccsteps;
+ n++, eccsteps--, i += eccbytes, p += eccsize) {
+ host->col_addr = n * eccsize;
+
+ chip->write_buf(mtd, p, eccsize);
+
+ host->col_addr = mtd->writesize + n * eccpitch;
+
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->write_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ /* Calculate remaining oob bytes */
+ i = mtd->oobsize - (oob - chip->oob_poi);
+ if (i)
+ chip->write_buf(mtd, oob, i);
+ return 0;
+}
+
+static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint32_t ecc_status = readl(&host->regs->ecc_status_result);
+ int subpages = mtd->writesize / nand_chip->subpagesize;
+ int pg2blk_shift = nand_chip->phys_erase_shift -
+ nand_chip->page_shift;
+
+ do {
+ if ((ecc_status & 0xf) > 4) {
+ static int last_bad = -1;
+
+ if (last_bad != host->page_addr >> pg2blk_shift) {
+ last_bad = host->page_addr >> pg2blk_shift;
+ printk(KERN_DEBUG
+ "MXC_NAND: HWECC uncorrectable ECC error"
+ " in block %u page %u subpage %d\n",
+ last_bad, host->page_addr,
+ mtd->writesize / nand_chip->subpagesize
+ - subpages);
+ }
+ return -1;
+ }
+ ecc_status >>= 4;
+ subpages--;
+ } while (subpages > 0);
+
+ return 0;
+}
+#else
+#define mxc_nand_read_page_syndrome NULL
+#define mxc_nand_read_page_raw_syndrome NULL
+#define mxc_nand_read_oob_syndrome NULL
+#define mxc_nand_write_page_syndrome NULL
+#define mxc_nand_write_page_raw_syndrome NULL
+#define mxc_nand_write_oob_syndrome NULL
+
static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
* additional correction. 2-Bit errors cannot be corrected by
* HW ECC, so we need to return failure
*/
- uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result);
+ uint16_t ecc_status = readnfc(&host->regs->ecc_status_result);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
MTDDEBUG(MTD_DEBUG_LEVEL0,
return 0;
}
+#endif
static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
uint8_t ret = 0;
uint16_t col;
uint16_t __iomem *main_buf =
- (uint16_t __iomem *)host->regs->main_area0;
+ (uint16_t __iomem *)host->regs->main_area[0];
uint16_t __iomem *spare_buf =
- (uint16_t __iomem *)host->regs->spare_area0;
+ (uint16_t __iomem *)host->regs->spare_area[0];
union {
uint16_t word;
uint8_t bytes[2];
col += mtd->writesize;
if (col < mtd->writesize) {
- p = (uint16_t __iomem *)(host->regs->main_area0 + (col >> 1));
+ p = (uint16_t __iomem *)(host->regs->main_area[0] +
+ (col >> 1));
} else {
- p = (uint16_t __iomem *)(host->regs->spare_area0 +
+ p = (uint16_t __iomem *)(host->regs->spare_area[0] +
((col - mtd->writesize) >> 1));
}
void __iomem *p;
if (col < mtd->writesize) {
- p = host->regs->main_area0 + (col & ~3);
+ p = host->regs->main_area[0] + (col & ~3);
} else {
- p = host->regs->spare_area0 -
+ p = host->regs->spare_area[0] -
mtd->writesize + (col & ~3);
}
void __iomem *p;
if (col < mtd->writesize) {
- p = host->regs->main_area0 + (col & ~3);
+ p = host->regs->main_area[0] + (col & ~3);
} else {
- p = host->regs->spare_area0 -
+ p = host->regs->spare_area[0] -
mtd->writesize + (col & ~3);
}
* Used by the upper layer to write command to NAND Flash for
* different operations to be carried out on NAND Flash
*/
-static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+void mxc_nand_command(struct mtd_info *mtd, unsigned command,
int column, int page_addr)
{
struct nand_chip *nand_chip = mtd->priv;
break;
case NAND_CMD_READ0:
+ host->page_addr = page_addr;
host->col_addr = column;
host->spare_only = false;
break;
/*
* before sending SEQIN command for partial write,
* we need read one page out. FSL NFC does not support
- * partial write. It alway send out 512+ecc+512+ecc ...
+ * partial write. It always sends out 512+ecc+512+ecc
* for large page nand flash. But for small page nand
* flash, it does support SPARE ONLY operation.
*/
case NAND_CMD_PAGEPROG:
send_prog_page(host, 0, host->spare_only);
- if (host->pagesize_2k) {
- /* data in 4 areas datas */
+ if (host->pagesize_2k && is_mxc_nfc_1()) {
+ /* data in 4 areas */
send_prog_page(host, 1, host->spare_only);
send_prog_page(host, 2, host->spare_only);
send_prog_page(host, 3, host->spare_only);
if (column != -1) {
/*
* MXC NANDFC can only perform full page+spare or
- * spare-only read/write. When the upper layers
- * layers perform a read/write buf operation,
- * we will used the saved column adress to index into
- * the full page.
+ * spare-only read/write. When the upper layers perform
+ * a read/write buffer operation, we will use the saved
+ * column address to index into the full page.
*/
send_addr(host, 0);
if (host->pagesize_2k)
/* Write out page address, if necessary */
if (page_addr != -1) {
- /* paddr_0 - p_addr_7 */
- send_addr(host, (page_addr & 0xff));
-
- if (host->pagesize_2k) {
- send_addr(host, (page_addr >> 8) & 0xFF);
- if (mtd->size >= 0x10000000) {
- /* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff);
- send_addr(host, (page_addr >> 16) & 0xff);
- } else {
- /* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff);
- }
- } else {
- /* One more address cycle for higher density devices */
- if (mtd->size >= 0x4000000) {
- /* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff);
- send_addr(host, (page_addr >> 16) & 0xff);
- } else {
- /* paddr_8 - paddr_15 */
- send_addr(host, (page_addr >> 8) & 0xff);
- }
- }
+ u32 page_mask = nand_chip->pagemask;
+ do {
+ send_addr(host, page_addr & 0xFF);
+ page_addr >>= 8;
+ page_mask >>= 8;
+ } while (page_mask);
}
/* Command post-processing step */
send_cmd(host, NAND_CMD_READSTART);
/* read for each AREA */
send_read_page(host, 0, host->spare_only);
- send_read_page(host, 1, host->spare_only);
- send_read_page(host, 2, host->spare_only);
- send_read_page(host, 3, host->spare_only);
+ if (is_mxc_nfc_1()) {
+ send_read_page(host, 1, host->spare_only);
+ send_read_page(host, 2, host->spare_only);
+ send_read_page(host, 3, host->spare_only);
+ }
} else {
send_read_page(host, 0, host->spare_only);
}
}
}
+#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
+
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+#endif
+
int board_nand_init(struct nand_chip *this)
{
struct mtd_info *mtd;
- uint16_t tmp;
- int err = 0;
+#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
+ uint32_t tmp;
+#endif
+
+#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
+ this->bbt_options |= NAND_BBT_USE_FLASH;
+ this->bbt_td = &bbt_main_descr;
+ this->bbt_md = &bbt_mirror_descr;
+#endif
/* structures must be linked */
mtd = &host->mtd;
this->read_buf = mxc_nand_read_buf;
this->verify_buf = mxc_nand_verify_buf;
- host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+ host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+#ifdef MXC_NFC_V3_2
+ host->ip_regs =
+ (struct mxc_nand_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
+#endif
host->clk_act = 1;
#ifdef CONFIG_MXC_NAND_HWECC
this->ecc.calculate = mxc_nand_calculate_ecc;
this->ecc.hwctl = mxc_nand_enable_hwecc;
this->ecc.correct = mxc_nand_correct_data;
- this->ecc.mode = NAND_ECC_HW;
+ if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
+ this->ecc.mode = NAND_ECC_HW_SYNDROME;
+ this->ecc.read_page = mxc_nand_read_page_syndrome;
+ this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome;
+ this->ecc.read_oob = mxc_nand_read_oob_syndrome;
+ this->ecc.write_page = mxc_nand_write_page_syndrome;
+ this->ecc.write_page_raw = mxc_nand_write_page_raw_syndrome;
+ this->ecc.write_oob = mxc_nand_write_oob_syndrome;
+ this->ecc.bytes = 9;
+ this->ecc.prepad = 7;
+ } else {
+ this->ecc.mode = NAND_ECC_HW;
+ }
+
+ if (this->ecc.mode == NAND_ECC_HW) {
+ if (is_mxc_nfc_1())
+ this->ecc.strength = 1;
+ else
+ this->ecc.strength = 4;
+ }
+
+ host->pagesize_2k = 0;
+
this->ecc.size = 512;
- this->ecc.bytes = 3;
- this->ecc.layout = &nand_hw_eccoob;
- tmp = readw(&host->regs->nfc_config1);
- tmp |= NFC_ECC_EN;
- writew(tmp, &host->regs->nfc_config1);
+ _mxc_nand_enable_hwecc(mtd, 1);
#else
this->ecc.layout = &nand_soft_eccoob;
this->ecc.mode = NAND_ECC_SOFT;
- tmp = readw(&host->regs->nfc_config1);
- tmp &= ~NFC_ECC_EN;
- writew(tmp, &host->regs->nfc_config1);
+ _mxc_nand_enable_hwecc(mtd, 0);
#endif
-
/* Reset NAND */
this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+ /* NAND bus width determines access functions used by upper layer */
+ if (is_16bit_nand())
+ this->options |= NAND_BUSWIDTH_16;
+
+#ifdef CONFIG_SYS_NAND_LARGEPAGE
+ host->pagesize_2k = 1;
+ this->ecc.layout = &nand_hw_eccoob2k;
+#else
+ host->pagesize_2k = 0;
+ this->ecc.layout = &nand_hw_eccoob;
+#endif
+
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+#ifdef MXC_NFC_V2_1
+ tmp = readnfc(&host->regs->config1);
+ tmp |= NFC_V2_CONFIG1_ONE_CYCLE;
+ tmp |= NFC_V2_CONFIG1_ECC_MODE_4;
+ writenfc(tmp, &host->regs->config1);
+ if (host->pagesize_2k)
+ writenfc(64/2, &host->regs->spare_area_size);
+ else
+ writenfc(16/2, &host->regs->spare_area_size);
+#endif
+
/*
* preset operation
* Unlock the internal RAM Buffer
*/
- writew(0x2, &host->regs->nfc_config);
+ writenfc(0x2, &host->regs->config);
/* Blocks to be unlocked */
- writew(0x0, &host->regs->nfc_unlockstart_blkaddr);
- writew(0x4000, &host->regs->nfc_unlockend_blkaddr);
+ writenfc(0x0, &host->regs->unlockstart_blkaddr);
+ /* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the
+ * unlockend_blkaddr, but the magic 0x4000 does not always work
+ * when writing more than some 32 megabytes (on 2k page nands)
+ * However 0xFFFF doesn't seem to have this kind
+ * of limitation (tried it back and forth several times).
+ * The linux kernel driver sets this to 0xFFFF for the v2 controller
+ * only, but probably this was not tested there for v1.
+ * The very same limitation seems to apply to this kernel driver.
+ * This might be NAND chip specific and the i.MX31 datasheet is
+ * extremely vague about the semantics of this register.
+ */
+ writenfc(0xFFFF, &host->regs->unlockend_blkaddr);
/* Unlock Block Command for given address range */
- writew(0x4, &host->regs->nfc_wrprot);
+ writenfc(0x4, &host->regs->wrprot);
+#elif defined(MXC_NFC_V3_2)
+ writenfc(NFC_V3_CONFIG1_RBA(0), &host->regs->config1);
+ writenfc(NFC_V3_IPC_CREQ, &host->ip_regs->ipc);
- /* NAND bus width determines access funtions used by upper layer */
- if (is_16bit_nand())
- this->options |= NAND_BUSWIDTH_16;
+ /* Unlock the internal RAM Buffer */
+ writenfc(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
+ &host->ip_regs->wrprot);
-#ifdef CONFIG_SYS_NAND_LARGEPAGE
- host->pagesize_2k = 1;
- this->ecc.layout = &nand_hw_eccoob_largepage;
-#else
- host->pagesize_2k = 0;
+ /* Blocks to be unlocked */
+ for (tmp = 0; tmp < CONFIG_SYS_NAND_MAX_CHIPS; tmp++)
+ writenfc(0x0 | 0xFFFF << 16,
+ &host->ip_regs->wrprot_unlock_blkaddr[tmp]);
+
+ writenfc(0, &host->ip_regs->ipc);
+
+ tmp = readnfc(&host->ip_regs->config2);
+ tmp &= ~(NFC_V3_CONFIG2_SPAS_MASK | NFC_V3_CONFIG2_EDC_MASK |
+ NFC_V3_CONFIG2_ECC_MODE_8 | NFC_V3_CONFIG2_PS_MASK);
+ tmp |= NFC_V3_CONFIG2_ONE_CYCLE;
+
+ if (host->pagesize_2k) {
+ tmp |= NFC_V3_CONFIG2_SPAS(64/2);
+ tmp |= NFC_V3_CONFIG2_PS_2048;
+ } else {
+ tmp |= NFC_V3_CONFIG2_SPAS(16/2);
+ tmp |= NFC_V3_CONFIG2_PS_512;
+ }
+
+ writenfc(tmp, &host->ip_regs->config2);
+
+ tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) |
+ NFC_V3_CONFIG3_NO_SDMA |
+ NFC_V3_CONFIG3_RBB_MODE |
+ NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+ NFC_V3_CONFIG3_ADD_OP(0);
+
+ if (!(this->options & NAND_BUSWIDTH_16))
+ tmp |= NFC_V3_CONFIG3_FW8;
+
+ writenfc(tmp, &host->ip_regs->config3);
+
+ writenfc(0, &host->ip_regs->delay_line);
#endif
- return err;
+ return 0;
}
projects / karo-tx-uboot.git / blobdiff