*/
#include <common.h>
+#include <errno.h>
#include <fdtdec.h>
#include <malloc.h>
#include <spi.h>
}
}
-static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
- u8 *idcode)
+static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
+ struct spi_flash *flash)
{
const struct spi_flash_params *params;
- struct spi_flash *flash;
u8 cmd;
u16 jedec = idcode[1] << 8 | idcode[2];
u16 ext_jedec = idcode[3] << 8 | idcode[4];
+ /* Validate params from spi_flash_params table */
params = spi_flash_params_table;
for (; params->name != NULL; params++) {
if ((params->jedec >> 16) == idcode[0]) {
printf("SF: Unsupported flash IDs: ");
printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
idcode[0], jedec, ext_jedec);
- return NULL;
- }
-
- flash = malloc(sizeof(*flash));
- if (!flash) {
- debug("SF: Failed to allocate spi_flash\n");
- return NULL;
+ return -EPROTONOSUPPORT;
}
- memset(flash, '\0', sizeof(*flash));
/* Assign spi data */
flash->spi = spi;
/* Compute the flash size */
flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
- flash->page_size = ((ext_jedec == 0x4d00) ? 512 : 256) << flash->shift;
+ /*
+ * The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
+ * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
+ * the 0x4d00 Extended JEDEC code have 512b pages. All of the others
+ * have 256b pages.
+ */
+ if (ext_jedec == 0x4d00) {
+ if ((jedec == 0x0215) || (jedec == 0x216))
+ flash->page_size = 256;
+ else
+ flash->page_size = 512;
+ } else {
+ flash->page_size = 256;
+ }
+ flash->page_size <<= flash->shift;
flash->sector_size = params->sector_size << flash->shift;
flash->size = flash->sector_size * params->nr_sectors << flash->shift;
#ifdef CONFIG_SF_DUAL_FLASH
/* Go for default supported write cmd */
flash->write_cmd = CMD_PAGE_PROGRAM;
- /* Set the quad enable bit - only for quad commands */
- if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
- (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
- (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
- if (spi_flash_set_qeb(flash, idcode[0])) {
- debug("SF: Fail to set QEB for %02x\n", idcode[0]);
- return NULL;
- }
- }
-
/* Read dummy_byte: dummy byte is determined based on the
* dummy cycles of a particular command.
* Fast commands - dummy_byte = dummy_cycles/8
#ifdef CONFIG_SPI_FLASH_BAR
u8 curr_bank = 0;
if (flash->size > SPI_FLASH_16MB_BOUN) {
+ int ret;
+
flash->bank_read_cmd = (idcode[0] == 0x01) ?
CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR;
flash->bank_write_cmd = (idcode[0] == 0x01) ?
CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR;
- if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
- &curr_bank, 1)) {
+ ret = spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
+ &curr_bank, 1);
+ if (ret) {
debug("SF: fail to read bank addr register\n");
- return NULL;
+ return ret;
}
flash->bank_curr = curr_bank;
} else {
spi_flash_cmd_write_status(flash, 0);
#endif
- return flash;
+ return 0;
}
#ifdef CONFIG_OF_CONTROL
}
#endif /* CONFIG_OF_CONTROL */
-static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
+#ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
+/* enable the W#/Vpp signal to disable writing to the status register */
+static int spi_enable_wp_pin(struct spi_flash *flash)
+{
+ u8 status;
+ int ret;
+
+ ret = spi_flash_cmd_read_status(flash, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = spi_flash_cmd_write_status(flash, STATUS_SRWD);
+ if (ret < 0)
+ return ret;
+
+ ret = spi_flash_cmd_write_disable(flash);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+#else
+static int spi_enable_wp_pin(struct spi_flash *flash)
+{
+ return 0;
+}
+#endif
+
+/**
+ * spi_flash_probe_slave() - Probe for a SPI flash device on a bus
+ *
+ * @spi: Bus to probe
+ * @flashp: Pointer to place to put flash info, which may be NULL if the
+ * space should be allocated
+ */
+int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
{
- struct spi_flash *flash = NULL;
u8 idcode[5];
int ret;
/* Setup spi_slave */
if (!spi) {
printf("SF: Failed to set up slave\n");
- return NULL;
+ return -ENODEV;
}
/* Claim spi bus */
ret = spi_claim_bus(spi);
if (ret) {
debug("SF: Failed to claim SPI bus: %d\n", ret);
- goto err_claim_bus;
+ return ret;
}
/* Read the ID codes */
print_buffer(0, idcode, 1, sizeof(idcode), 0);
#endif
- /* Validate params from spi_flash_params table */
- flash = spi_flash_validate_params(spi, idcode);
- if (!flash)
+ if (spi_flash_validate_params(spi, idcode, flash)) {
+ ret = -EINVAL;
goto err_read_id;
+ }
+
+ /* Set the quad enable bit - only for quad commands */
+ if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
+ (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
+ (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
+ if (spi_flash_set_qeb(flash, idcode[0])) {
+ debug("SF: Fail to set QEB for %02x\n", idcode[0]);
+ ret = -EINVAL;
+ goto err_read_id;
+ }
+ }
#ifdef CONFIG_OF_CONTROL
if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
debug("SF: FDT decode error\n");
+ ret = -EINVAL;
goto err_read_id;
}
#endif
puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
}
#endif
+ if (spi_enable_wp_pin(flash))
+ puts("Enable WP pin failed\n");
/* Release spi bus */
spi_release_bus(spi);
- return flash;
+ return 0;
err_read_id:
spi_release_bus(spi);
-err_claim_bus:
- spi_free_slave(spi);
- return NULL;
+ return ret;
+}
+
+static struct spi_flash *spi_flash_probe_tail(struct spi_slave *bus)
+{
+ struct spi_flash *flash;
+
+ /* Allocate space if needed (not used by sf-uclass */
+ flash = calloc(1, sizeof(*flash));
+ if (!flash) {
+ debug("SF: Failed to allocate spi_flash\n");
+ return NULL;
+ }
+
+ if (spi_flash_probe_slave(bus, flash)) {
+ spi_free_slave(bus);
+ free(flash);
+ return NULL;
+ }
+
+ return flash;
}
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
{
- struct spi_slave *spi;
+ struct spi_slave *bus;
- spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
- return spi_flash_probe_slave(spi);
+ bus = spi_setup_slave(busnum, cs, max_hz, spi_mode);
+ return spi_flash_probe_tail(bus);
}
#ifdef CONFIG_OF_SPI_FLASH
struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
int spi_node)
{
- struct spi_slave *spi;
+ struct spi_slave *bus;
- spi = spi_setup_slave_fdt(blob, slave_node, spi_node);
- return spi_flash_probe_slave(spi);
+ bus = spi_setup_slave_fdt(blob, slave_node, spi_node);
+ return spi_flash_probe_tail(bus);
}
#endif
projects / karo-tx-uboot.git / blobdiff