net: Add support for Marvell 88E1510 PHY

[karo-tx-uboot.git] / drivers / net / e1000.h

diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index 25884f5bc5241cfcd6c65698afb75aa724bd0ba3..232c95d2a4eaf5d38740b1445b46f5cef15fd922 100644 (file)
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -63,11 +63,14 @@ struct e1000_hw_stats;
 
 /* Internal E1000 helper functions */
 struct e1000_hw *e1000_find_card(unsigned int cardnum);
+
+#ifndef CONFIG_E1000_NO_NVM
 int32_t e1000_acquire_eeprom(struct e1000_hw *hw);
 void e1000_standby_eeprom(struct e1000_hw *hw);
 void e1000_release_eeprom(struct e1000_hw *hw);
 void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
 void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
+#endif
 
 #ifdef CONFIG_E1000_SPI
 int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
@@ -97,6 +100,7 @@ typedef enum {
        e1000_82574,
        e1000_80003es2lan,
        e1000_ich8lan,
+       e1000_igb,
        e1000_num_macs
 } e1000_mac_type;
 
@@ -115,6 +119,7 @@ typedef enum {
        e1000_eeprom_flash,
        e1000_eeprom_ich8,
        e1000_eeprom_none, /* No NVM support */
+       e1000_eeprom_invm,
        e1000_num_eeprom_types
 } e1000_eeprom_type;
 
@@ -209,6 +214,7 @@ typedef enum {
        e1000_phy_gg82563,
        e1000_phy_igp_3,
        e1000_phy_ife,
+       e1000_phy_igb,
        e1000_phy_bm,
        e1000_phy_undefined = 0xFF
 } e1000_phy_type;
@@ -424,12 +430,11 @@ struct e1000_phy_stats {
 #define ENET_HEADER_SIZE            14
 #define MAXIMUM_ETHERNET_FRAME_SIZE  1518      /* With FCS */
 #define MINIMUM_ETHERNET_FRAME_SIZE  64        /* With FCS */
-#define ETHERNET_FCS_SIZE           4
 #define MAXIMUM_ETHERNET_PACKET_SIZE \
-    (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+       (MAXIMUM_ETHERNET_FRAME_SIZE - ETH_FCS_LEN)
 #define MINIMUM_ETHERNET_PACKET_SIZE \
-    (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
-#define CRC_LENGTH                  ETHERNET_FCS_SIZE
+       (MINIMUM_ETHERNET_FRAME_SIZE - ETH_FCS_LEN)
+#define CRC_LENGTH                  ETH_FCS_LEN
 #define MAX_JUMBO_FRAME_SIZE        0x3F00
 
 /* 802.1q VLAN Packet Sizes */
@@ -683,7 +688,9 @@ struct e1000_ffvt_entry {
 #define E1000_CTRL     0x00000 /* Device Control - RW */
 #define E1000_STATUS   0x00008 /* Device Status - RO */
 #define E1000_EECD     0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_I210_EECD     0x12010    /* EEPROM/Flash Control - RW */
 #define E1000_EERD     0x00014 /* EEPROM Read - RW */
+#define E1000_I210_EERD     0x12014    /* EEPROM Read - RW */
 #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
 #define E1000_MDIC     0x00020 /* MDI Control - RW */
 #define E1000_FCAL     0x00028 /* Flow Control Address Low - RW */
@@ -695,6 +702,7 @@ struct e1000_ffvt_entry {
 #define E1000_ICS      0x000C8 /* Interrupt Cause Set - WO */
 #define E1000_IMS      0x000D0 /* Interrupt Mask Set - RW */
 #define E1000_IMC      0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_I210_IAM      0x000E0    /* Interrupt Ack Auto Mask - RW */
 #define E1000_RCTL     0x00100 /* RX Control - RW */
 #define E1000_FCTTV    0x00170 /* Flow Control Transmit Timer Value - RW */
 #define E1000_TXCW     0x00178 /* TX Configuration Word - RW */
@@ -708,14 +716,17 @@ struct e1000_ffvt_entry {
 #define E1000_EXTCNF_CTRL  0x00F00  /* Extended Configuration Control */
 #define E1000_EXTCNF_SIZE  0x00F08  /* Extended Configuration Size */
 #define E1000_PHY_CTRL     0x00F10  /* PHY Control Register in CSR */
+#define E1000_I210_PHY_CTRL     0x00E14  /* PHY Control Register in CSR */
 #define FEXTNVM_SW_CONFIG  0x0001
 #define E1000_PBA      0x01000 /* Packet Buffer Allocation - RW */
 #define E1000_PBS      0x01008  /* Packet Buffer Size */
 #define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
+#define E1000_I210_EEMNGCTL 0x12030  /* MNG EEprom Control */
 #define E1000_FLASH_UPDATES 1000
 #define E1000_EEARBC   0x01024  /* EEPROM Auto Read Bus Control */
 #define E1000_FLASHT   0x01028  /* FLASH Timer Register */
 #define E1000_EEWR     0x0102C  /* EEPROM Write Register - RW */
+#define E1000_I210_EEWR     0x12018  /* EEPROM Write Register - RW */
 #define E1000_FLSWCTL  0x01030  /* FLASH control register */
 #define E1000_FLSWDATA 0x01034  /* FLASH data register */
 #define E1000_FLSWCNT  0x01038  /* FLASH Access Counter */
@@ -1019,6 +1030,7 @@ struct e1000_hw_stats {
        uint64_t tsctfc;
 };
 
+#ifndef CONFIG_E1000_NO_NVM
 struct e1000_eeprom_info {
 e1000_eeprom_type type;
        uint16_t word_size;
@@ -1029,6 +1041,7 @@ e1000_eeprom_type type;
        bool use_eerd;
        bool use_eewr;
 };
+#endif
 
 typedef enum {
     e1000_smart_speed_default = 0,
@@ -1081,10 +1094,14 @@ struct e1000_hw {
        uint32_t io_base;
 #endif
        uint32_t                asf_firmware_present;
+#ifndef CONFIG_E1000_NO_NVM
        uint32_t                eeprom_semaphore_present;
+#endif
        uint32_t                swfw_sync_present;
        uint32_t                swfwhw_semaphore_present;
+#ifndef CONFIG_E1000_NO_NVM
        struct e1000_eeprom_info eeprom;
+#endif
        e1000_ms_type           master_slave;
        e1000_ms_type           original_master_slave;
        e1000_ffe_config        ffe_config_state;
@@ -1213,6 +1230,7 @@ struct e1000_hw {
 #define E1000_STATUS_BUS64     0x00001000      /* In 64 bit slot */
 #define E1000_STATUS_PCIX_MODE 0x00002000      /* PCI-X mode */
 #define E1000_STATUS_PCIX_SPEED 0x0000C000     /* PCI-X bus speed */
+#define E1000_STATUS_PF_RST_DONE 0x00200000    /* PCI-X bus speed */
 
 /* Constants used to intrepret the masked PCI-X bus speed. */
 #define E1000_STATUS_PCIX_SPEED_66  0x00000000 /* PCI-X bus speed  50-66 MHz */
@@ -2429,6 +2447,8 @@ struct e1000_hw {
 
 #define BME1000_E_PHY_ID     0x01410CB0
 
+#define I210_I_PHY_ID          0x01410C00
+
 /* Miscellaneous PHY bit definitions. */
 #define PHY_PREAMBLE                   0xFFFFFFFF
 #define PHY_SOF                                0x01