#define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
#endif /* UEC_VERBOSE_DEBUG */
+/*--------------------------------------------------------------------+
+ * Fixed PHY (PHY-less) support for Ethernet Ports.
+ *
+ * Copied from arch/powerpc/cpu/ppc4xx/4xx_enet.c
+ *--------------------------------------------------------------------*/
+
+/*
+ * Some boards do not have a PHY for each ethernet port. These ports are known
+ * as Fixed PHY (or PHY-less) ports. For such ports, set the appropriate
+ * CONFIG_SYS_UECx_PHY_ADDR equal to CONFIG_FIXED_PHY_ADDR (an unused address)
+ * When the drver tries to identify the PHYs, CONFIG_FIXED_PHY will be returned
+ * and the driver will search CONFIG_SYS_FIXED_PHY_PORTS to find what network
+ * speed and duplex should be for the port.
+ *
+ * Example board header configuration file:
+ * #define CONFIG_FIXED_PHY 0xFFFFFFFF
+ * #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E (pick an unused phy address)
+ *
+ * #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+ * #define CONFIG_SYS_UEC2_PHY_ADDR 0x02
+ * #define CONFIG_SYS_UEC3_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+ * #define CONFIG_SYS_UEC4_PHY_ADDR 0x04
+ *
+ * #define CONFIG_SYS_FIXED_PHY_PORT(name,speed,duplex) \
+ * {name, speed, duplex},
+ *
+ * #define CONFIG_SYS_FIXED_PHY_PORTS \
+ * CONFIG_SYS_FIXED_PHY_PORT("FSL UEC0",SPEED_100,DUPLEX_FULL) \
+ * CONFIG_SYS_FIXED_PHY_PORT("FSL UEC2",SPEED_100,DUPLEX_HALF)
+ */
+
+#ifndef CONFIG_FIXED_PHY
+#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */
+#endif
+
+#ifndef CONFIG_SYS_FIXED_PHY_PORTS
+#define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */
+#endif
+
+struct fixed_phy_port {
+ char name[NAMESIZE]; /* ethernet port name */
+ unsigned int speed; /* specified speed 10,100 or 1000 */
+ unsigned int duplex; /* specified duplex FULL or HALF */
+};
+
+static const struct fixed_phy_port fixed_phy_port[] = {
+ CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */
+};
+
static void config_genmii_advert (struct uec_mii_info *mii_info);
static void genmii_setup_forced (struct uec_mii_info *mii_info);
static void genmii_restart_aneg (struct uec_mii_info *mii_info);
gbit_config_aneg(mii_info);
- if (uec->uec_info->enet_interface == ENET_1000_RGMII_RXID) {
+ if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
+ (uec->uec_info->speed == 1000)) {
u16 val;
int cnt = 50;
return 0;
}
+static int marvell_init(struct uec_mii_info *mii_info)
+{
+ struct eth_device *edev = mii_info->dev;
+ uec_private_t *uec = edev->priv;
+ enum enet_interface_type iface = uec->uec_info->enet_interface_type;
+ int speed = uec->uec_info->speed;
+
+ if ((speed == 1000) &&
+ (iface == RGMII_ID ||
+ iface == RGMII_RXID ||
+ iface == RGMII_TXID)) {
+ int temp;
+
+ temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
+ if (iface == RGMII_ID) {
+ temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
+ } else if (iface == RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (iface == RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
+ }
+ phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
+
+ temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
+ temp &= ~MII_M1111_HWCFG_MODE_MASK;
+ temp |= MII_M1111_HWCFG_MODE_RGMII;
+ phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
+
+ phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET);
+ }
+
+ return 0;
+}
+
static int marvell_read_status (struct uec_mii_info *mii_info)
{
u16 status;
{
}
+static int fixed_phy_aneg (struct uec_mii_info *mii_info)
+{
+ mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */
+ return 0;
+}
+
+static int fixed_phy_read_status (struct uec_mii_info *mii_info)
+{
+ int i = 0;
+
+ for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
+ if (strncmp(mii_info->dev->name, fixed_phy_port[i].name,
+ strlen(mii_info->dev->name)) == 0) {
+ mii_info->speed = fixed_phy_port[i].speed;
+ mii_info->duplex = fixed_phy_port[i].duplex;
+ mii_info->link = 1; /* Link is always UP */
+ mii_info->pause = 0;
+ break;
+ }
+ }
+ return 0;
+}
+
+static int smsc_config_aneg (struct uec_mii_info *mii_info)
+{
+ return 0;
+}
+
+static int smsc_read_status (struct uec_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genmii_update_link (mii_info);
+ if (err)
+ return err;
+
+ /* If the link is up, read the speed and duplex */
+ /* If we aren't autonegotiating, assume speeds
+ * are as set */
+ if (mii_info->autoneg && mii_info->link) {
+ int val;
+
+ status = phy_read (mii_info, 0x1f);
+ val = (status & 0x1c) >> 2;
+
+ switch (val) {
+ case 1:
+ mii_info->duplex = DUPLEX_HALF;
+ mii_info->speed = SPEED_10;
+ break;
+ case 5:
+ mii_info->duplex = DUPLEX_FULL;
+ mii_info->speed = SPEED_10;
+ break;
+ case 2:
+ mii_info->duplex = DUPLEX_HALF;
+ mii_info->speed = SPEED_100;
+ break;
+ case 6:
+ mii_info->duplex = DUPLEX_FULL;
+ mii_info->speed = SPEED_100;
+ break;
+ }
+ mii_info->pause = 0;
+ }
+
+ return 0;
+}
+
static struct phy_info phy_info_dm9161 = {
.phy_id = 0x0181b880,
.phy_id_mask = 0x0ffffff0,
.phy_id_mask = 0xffffff00,
.name = "Marvell 88E11x1",
.features = MII_GBIT_FEATURES,
+ .init = &marvell_init,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.init = bcm_init,
};
+static struct phy_info phy_info_fixedphy = {
+ .phy_id = CONFIG_FIXED_PHY,
+ .phy_id_mask = CONFIG_FIXED_PHY,
+ .name = "Fixed PHY",
+ .config_aneg = fixed_phy_aneg,
+ .read_status = fixed_phy_read_status,
+};
+
+static struct phy_info phy_info_smsclan8700 = {
+ .phy_id = 0x0007c0c0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "SMSC LAN8700",
+ .features = MII_BASIC_FEATURES,
+ .config_aneg = smsc_config_aneg,
+ .read_status = smsc_read_status,
+};
+
static struct phy_info phy_info_genmii = {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
&phy_info_dm9161a,
&phy_info_marvell,
&phy_info_bcm5481,
+ &phy_info_smsclan8700,
+ &phy_info_fixedphy,
&phy_info_genmii,
NULL
};
}
void marvell_phy_interface_mode (struct eth_device *dev,
- enet_interface_e mode)
+ enet_interface_type_e type,
+ int speed
+ )
{
uec_private_t *uec = (uec_private_t *) dev->priv;
struct uec_mii_info *mii_info;
}
mii_info = uec->mii_info;
- if (mode == ENET_100_RGMII) {
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x1d, 0x001f);
- phy_write (mii_info, 0x1e, 0x200c);
- phy_write (mii_info, 0x1d, 0x0005);
- phy_write (mii_info, 0x1e, 0x0000);
- phy_write (mii_info, 0x1e, 0x0100);
- phy_write (mii_info, 0x09, 0x0e00);
- phy_write (mii_info, 0x04, 0x01e1);
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x00, 0x1000);
- udelay (100000);
- phy_write (mii_info, 0x00, 0x2900);
- phy_write (mii_info, 0x14, 0x0cd2);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x09, 0x0000);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x04, 0x05e1);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x00, 0x2100);
- udelay (1000000);
- } else if (mode == ENET_10_RGMII) {
- phy_write (mii_info, 0x14, 0x8e40);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x14, 0x0c82);
- phy_write (mii_info, 0x00, 0x8100);
- udelay (1000000);
+ if (type == RGMII) {
+ if (speed == 100) {
+ phy_write (mii_info, 0x00, 0x9140);
+ phy_write (mii_info, 0x1d, 0x001f);
+ phy_write (mii_info, 0x1e, 0x200c);
+ phy_write (mii_info, 0x1d, 0x0005);
+ phy_write (mii_info, 0x1e, 0x0000);
+ phy_write (mii_info, 0x1e, 0x0100);
+ phy_write (mii_info, 0x09, 0x0e00);
+ phy_write (mii_info, 0x04, 0x01e1);
+ phy_write (mii_info, 0x00, 0x9140);
+ phy_write (mii_info, 0x00, 0x1000);
+ udelay (100000);
+ phy_write (mii_info, 0x00, 0x2900);
+ phy_write (mii_info, 0x14, 0x0cd2);
+ phy_write (mii_info, 0x00, 0xa100);
+ phy_write (mii_info, 0x09, 0x0000);
+ phy_write (mii_info, 0x1b, 0x800b);
+ phy_write (mii_info, 0x04, 0x05e1);
+ phy_write (mii_info, 0x00, 0xa100);
+ phy_write (mii_info, 0x00, 0x2100);
+ udelay (1000000);
+ } else if (speed == 10) {
+ phy_write (mii_info, 0x14, 0x8e40);
+ phy_write (mii_info, 0x1b, 0x800b);
+ phy_write (mii_info, 0x14, 0x0c82);
+ phy_write (mii_info, 0x00, 0x8100);
+ udelay (1000000);
+ }
}
/* handle 88e1111 rev.B2 erratum 5.6 */
/* now the B2 will correctly report autoneg completion status */
}
-void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)
+void change_phy_interface_mode (struct eth_device *dev,
+ enet_interface_type_e type, int speed)
{
#ifdef CONFIG_PHY_MODE_NEED_CHANGE
- marvell_phy_interface_mode (dev, mode);
+ marvell_phy_interface_mode (dev, type, speed);
#endif
}