#include "uec_phy.h"
#include "miiphy.h"
-#if defined(CONFIG_QE)
-
-#define UEC_VERBOSE_DEBUG
#define ugphy_printk(format, arg...) \
printf(format "\n", ## arg)
#define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
#endif /* UEC_VERBOSE_DEBUG */
+/*--------------------------------------------------------------------+
+ * Fixed PHY (PHY-less) support for Ethernet Ports.
+ *
+ * Copied from arch/powerpc/cpu/ppc4xx/4xx_enet.c
+ *--------------------------------------------------------------------*/
+
+/*
+ * Some boards do not have a PHY for each ethernet port. These ports are known
+ * as Fixed PHY (or PHY-less) ports. For such ports, set the appropriate
+ * CONFIG_SYS_UECx_PHY_ADDR equal to CONFIG_FIXED_PHY_ADDR (an unused address)
+ * When the drver tries to identify the PHYs, CONFIG_FIXED_PHY will be returned
+ * and the driver will search CONFIG_SYS_FIXED_PHY_PORTS to find what network
+ * speed and duplex should be for the port.
+ *
+ * Example board header configuration file:
+ * #define CONFIG_FIXED_PHY 0xFFFFFFFF
+ * #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E (pick an unused phy address)
+ *
+ * #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+ * #define CONFIG_SYS_UEC2_PHY_ADDR 0x02
+ * #define CONFIG_SYS_UEC3_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+ * #define CONFIG_SYS_UEC4_PHY_ADDR 0x04
+ *
+ * #define CONFIG_SYS_FIXED_PHY_PORT(name,speed,duplex) \
+ * {name, speed, duplex},
+ *
+ * #define CONFIG_SYS_FIXED_PHY_PORTS \
+ * CONFIG_SYS_FIXED_PHY_PORT("FSL UEC0",SPEED_100,DUPLEX_FULL) \
+ * CONFIG_SYS_FIXED_PHY_PORT("FSL UEC2",SPEED_100,DUPLEX_HALF)
+ */
+
+#ifndef CONFIG_FIXED_PHY
+#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */
+#endif
+
+#ifndef CONFIG_SYS_FIXED_PHY_PORTS
+#define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */
+#endif
+
+struct fixed_phy_port {
+ char name[NAMESIZE]; /* ethernet port name */
+ unsigned int speed; /* specified speed 10,100 or 1000 */
+ unsigned int duplex; /* specified duplex FULL or HALF */
+};
+
+static const struct fixed_phy_port fixed_phy_port[] = {
+ CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */
+};
+
static void config_genmii_advert (struct uec_mii_info *mii_info);
static void genmii_setup_forced (struct uec_mii_info *mii_info);
static void genmii_restart_aneg (struct uec_mii_info *mii_info);
/* Setting up the MII Mangement Control Register with the value */
out_be32 (&ug_regs->miimcon, (u32) value);
+ sync();
/* Wait till MII management write is complete */
while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY);
-
- udelay (100000);
}
/* Reads from register regnum in the PHY for device dev, */
tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
out_be32 (&ug_regs->miimadd, tmp_reg);
- /* Perform an MII management read cycle */
+ /* clear MII management command cycle */
out_be32 (&ug_regs->miimcom, 0);
+ sync();
+
+ /* Perform an MII management read cycle */
out_be32 (&ug_regs->miimcom, MIIMCOM_READ_CYCLE);
/* Wait till MII management write is complete */
while ((in_be32 (&ug_regs->miimind)) &
(MIIMIND_NOT_VALID | MIIMIND_BUSY));
- udelay (100000);
-
/* Read MII management status */
value = (u16) in_be32 (&ug_regs->miimstat);
if (value == 0xffff)
- ugphy_warn
+ ugphy_vdbg
("read wrong value : mii_id %d,mii_reg %d, base %08x",
mii_id, mii_reg, (u32) & (ug_regs->miimcfg));
{
u16 status;
- /* Do a fake read */
+ /* Status is read once to clear old link state */
phy_read (mii_info, PHY_BMSR);
- /* Read link and autonegotiation status */
- status = phy_read (mii_info, PHY_BMSR);
- if ((status & PHY_BMSR_LS) == 0)
- mii_info->link = 0;
- else
+ /*
+ * Wait if the link is up, and autonegotiation is in progress
+ * (ie - we're capable and it's not done)
+ */
+ status = phy_read(mii_info, PHY_BMSR);
+ if ((status & PHY_BMSR_LS) && (status & PHY_BMSR_AUTN_ABLE)
+ && !(status & PHY_BMSR_AUTN_COMP)) {
+ int i = 0;
+
+ while (!(status & PHY_BMSR_AUTN_COMP)) {
+ /*
+ * Timeout reached ?
+ */
+ if (i > UGETH_AN_TIMEOUT) {
+ mii_info->link = 0;
+ return 0;
+ }
+
+ i++;
+ udelay(1000); /* 1 ms */
+ status = phy_read(mii_info, PHY_BMSR);
+ }
mii_info->link = 1;
-
- /* If we are autonegotiating, and not done,
- * return an error */
- if (mii_info->autoneg && !(status & PHY_BMSR_AUTN_COMP))
- return -EAGAIN;
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (status & PHY_BMSR_LS)
+ mii_info->link = 1;
+ else
+ mii_info->link = 0;
+ }
return 0;
}
return err;
if (mii_info->autoneg) {
- status = phy_read (mii_info, PHY_ANLPAR);
+ status = phy_read(mii_info, MII_1000BASETSTATUS);
- if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
- mii_info->duplex = DUPLEX_FULL;
- else
- mii_info->duplex = DUPLEX_HALF;
- if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
- mii_info->speed = SPEED_100;
- else
- mii_info->speed = SPEED_10;
+ if (status & (LPA_1000FULL | LPA_1000HALF)) {
+ mii_info->speed = SPEED_1000;
+ if (status & LPA_1000FULL)
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ } else {
+ status = phy_read(mii_info, PHY_ANLPAR);
+
+ if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+ mii_info->duplex = DUPLEX_FULL;
+ else
+ mii_info->duplex = DUPLEX_HALF;
+ if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
+ mii_info->speed = SPEED_100;
+ else
+ mii_info->speed = SPEED_10;
+ }
mii_info->pause = 0;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
return 0;
}
+static int bcm_init(struct uec_mii_info *mii_info)
+{
+ struct eth_device *edev = mii_info->dev;
+ uec_private_t *uec = edev->priv;
+
+ gbit_config_aneg(mii_info);
+
+ if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
+ (uec->uec_info->speed == 1000)) {
+ u16 val;
+ int cnt = 50;
+
+ /* Wait for aneg to complete. */
+ do
+ val = phy_read(mii_info, PHY_BMSR);
+ while (--cnt && !(val & PHY_BMSR_AUTN_COMP));
+
+ /* Set RDX clk delay. */
+ phy_write(mii_info, 0x18, 0x7 | (7 << 12));
+
+ val = phy_read(mii_info, 0x18);
+ /* Set RDX-RXC skew. */
+ val |= (1 << 8);
+ val |= (7 | (7 << 12));
+ /* Write bits 14:0. */
+ val |= (1 << 15);
+ phy_write(mii_info, 0x18, val);
+ }
+
+ return 0;
+}
+
+static int marvell_init(struct uec_mii_info *mii_info)
+{
+ struct eth_device *edev = mii_info->dev;
+ uec_private_t *uec = edev->priv;
+ enum enet_interface_type iface = uec->uec_info->enet_interface_type;
+ int speed = uec->uec_info->speed;
+
+ if ((speed == 1000) &&
+ (iface == RGMII_ID ||
+ iface == RGMII_RXID ||
+ iface == RGMII_TXID)) {
+ int temp;
+
+ temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
+ if (iface == RGMII_ID) {
+ temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
+ } else if (iface == RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (iface == RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
+ }
+ phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
+
+ temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
+ temp &= ~MII_M1111_HWCFG_MODE_MASK;
+ temp |= MII_M1111_HWCFG_MODE_RGMII;
+ phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
+
+ phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET);
+ }
+
+ return 0;
+}
+
static int marvell_read_status (struct uec_mii_info *mii_info)
{
u16 status;
/* PHY and MAC connect */
phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) &
~PHY_BMCR_ISO);
-#ifdef CONFIG_RMII_MODE
- phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_RMII_INIT);
-#else
+
phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
-#endif
+
config_genmii_advert (mii_info);
/* Start/restart aneg */
genmii_config_aneg (mii_info);
- /* Delay to wait the aneg compeleted */
- udelay (3000000);
return 0;
}
{
}
+static int fixed_phy_aneg (struct uec_mii_info *mii_info)
+{
+ mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */
+ return 0;
+}
+
+static int fixed_phy_read_status (struct uec_mii_info *mii_info)
+{
+ int i = 0;
+
+ for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
+ if (strncmp(mii_info->dev->name, fixed_phy_port[i].name,
+ strlen(mii_info->dev->name)) == 0) {
+ mii_info->speed = fixed_phy_port[i].speed;
+ mii_info->duplex = fixed_phy_port[i].duplex;
+ mii_info->link = 1; /* Link is always UP */
+ mii_info->pause = 0;
+ break;
+ }
+ }
+ return 0;
+}
+
+static int smsc_config_aneg (struct uec_mii_info *mii_info)
+{
+ return 0;
+}
+
+static int smsc_read_status (struct uec_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genmii_update_link (mii_info);
+ if (err)
+ return err;
+
+ /* If the link is up, read the speed and duplex */
+ /* If we aren't autonegotiating, assume speeds
+ * are as set */
+ if (mii_info->autoneg && mii_info->link) {
+ int val;
+
+ status = phy_read (mii_info, 0x1f);
+ val = (status & 0x1c) >> 2;
+
+ switch (val) {
+ case 1:
+ mii_info->duplex = DUPLEX_HALF;
+ mii_info->speed = SPEED_10;
+ break;
+ case 5:
+ mii_info->duplex = DUPLEX_FULL;
+ mii_info->speed = SPEED_10;
+ break;
+ case 2:
+ mii_info->duplex = DUPLEX_HALF;
+ mii_info->speed = SPEED_100;
+ break;
+ case 6:
+ mii_info->duplex = DUPLEX_FULL;
+ mii_info->speed = SPEED_100;
+ break;
+ }
+ mii_info->pause = 0;
+ }
+
+ return 0;
+}
+
static struct phy_info phy_info_dm9161 = {
.phy_id = 0x0181b880,
.phy_id_mask = 0x0ffffff0,
.phy_id_mask = 0xffffff00,
.name = "Marvell 88E11x1",
.features = MII_GBIT_FEATURES,
+ .init = &marvell_init,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
};
+static struct phy_info phy_info_bcm5481 = {
+ .phy_id = 0x0143bca0,
+ .phy_id_mask = 0xffffff0,
+ .name = "Broadcom 5481",
+ .features = MII_GBIT_FEATURES,
+ .read_status = genmii_read_status,
+ .init = bcm_init,
+};
+
+static struct phy_info phy_info_fixedphy = {
+ .phy_id = CONFIG_FIXED_PHY,
+ .phy_id_mask = CONFIG_FIXED_PHY,
+ .name = "Fixed PHY",
+ .config_aneg = fixed_phy_aneg,
+ .read_status = fixed_phy_read_status,
+};
+
+static struct phy_info phy_info_smsclan8700 = {
+ .phy_id = 0x0007c0c0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "SMSC LAN8700",
+ .features = MII_BASIC_FEATURES,
+ .config_aneg = smsc_config_aneg,
+ .read_status = smsc_read_status,
+};
+
static struct phy_info phy_info_genmii = {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
&phy_info_dm9161,
&phy_info_dm9161a,
&phy_info_marvell,
+ &phy_info_bcm5481,
+ &phy_info_smsclan8700,
+ &phy_info_fixedphy,
&phy_info_genmii,
NULL
};
}
void marvell_phy_interface_mode (struct eth_device *dev,
- enet_interface_e mode)
+ enet_interface_type_e type,
+ int speed
+ )
{
uec_private_t *uec = (uec_private_t *) dev->priv;
struct uec_mii_info *mii_info;
+ u16 status;
if (!uec->mii_info) {
- printf ("%s: the PHY not intialized\n", __FUNCTION__);
+ printf ("%s: the PHY not initialized\n", __FUNCTION__);
return;
}
mii_info = uec->mii_info;
- if (mode == ENET_100_RGMII) {
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x1d, 0x001f);
- phy_write (mii_info, 0x1e, 0x200c);
- phy_write (mii_info, 0x1d, 0x0005);
- phy_write (mii_info, 0x1e, 0x0000);
- phy_write (mii_info, 0x1e, 0x0100);
- phy_write (mii_info, 0x09, 0x0e00);
- phy_write (mii_info, 0x04, 0x01e1);
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x00, 0x1000);
- udelay (100000);
- phy_write (mii_info, 0x00, 0x2900);
- phy_write (mii_info, 0x14, 0x0cd2);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x09, 0x0000);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x04, 0x05e1);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x00, 0x2100);
- udelay (1000000);
- } else if (mode == ENET_10_RGMII) {
- phy_write (mii_info, 0x14, 0x8e40);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x14, 0x0c82);
- phy_write (mii_info, 0x00, 0x8100);
- udelay (1000000);
+ if (type == RGMII) {
+ if (speed == 100) {
+ phy_write (mii_info, 0x00, 0x9140);
+ phy_write (mii_info, 0x1d, 0x001f);
+ phy_write (mii_info, 0x1e, 0x200c);
+ phy_write (mii_info, 0x1d, 0x0005);
+ phy_write (mii_info, 0x1e, 0x0000);
+ phy_write (mii_info, 0x1e, 0x0100);
+ phy_write (mii_info, 0x09, 0x0e00);
+ phy_write (mii_info, 0x04, 0x01e1);
+ phy_write (mii_info, 0x00, 0x9140);
+ phy_write (mii_info, 0x00, 0x1000);
+ udelay (100000);
+ phy_write (mii_info, 0x00, 0x2900);
+ phy_write (mii_info, 0x14, 0x0cd2);
+ phy_write (mii_info, 0x00, 0xa100);
+ phy_write (mii_info, 0x09, 0x0000);
+ phy_write (mii_info, 0x1b, 0x800b);
+ phy_write (mii_info, 0x04, 0x05e1);
+ phy_write (mii_info, 0x00, 0xa100);
+ phy_write (mii_info, 0x00, 0x2100);
+ udelay (1000000);
+ } else if (speed == 10) {
+ phy_write (mii_info, 0x14, 0x8e40);
+ phy_write (mii_info, 0x1b, 0x800b);
+ phy_write (mii_info, 0x14, 0x0c82);
+ phy_write (mii_info, 0x00, 0x8100);
+ udelay (1000000);
+ }
+ }
+
+ /* handle 88e1111 rev.B2 erratum 5.6 */
+ if (mii_info->autoneg) {
+ status = phy_read (mii_info, PHY_BMCR);
+ phy_write (mii_info, PHY_BMCR, status | PHY_BMCR_AUTON);
}
+ /* now the B2 will correctly report autoneg completion status */
}
-void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)
+void change_phy_interface_mode (struct eth_device *dev,
+ enet_interface_type_e type, int speed)
{
#ifdef CONFIG_PHY_MODE_NEED_CHANGE
- marvell_phy_interface_mode (dev, mode);
+ marvell_phy_interface_mode (dev, type, speed);
#endif
}
-#endif /* CONFIG_QE */
projects / karo-tx-uboot.git / blobdiff