/*
* Function Prototypes
*/
+int dram_init(void);
void hang (void) __attribute__ ((noreturn));
/* */
phys_size_t initdram (int);
-int display_options (void);
-/**
- * print_size() - Print a size with a suffic
- *
- * print sizes as "xxx KiB", "xxx.y KiB", "xxx MiB", "xxx.y MiB",
- * xxx GiB, xxx.y GiB, etc as needed; allow for optional trailing string
- * (like "\n")
- *
- * @size: Size to print
- * @suffix String to print after the size
- */
-void print_size(uint64_t size, const char *suffix);
-
-int print_buffer(ulong addr, const void *data, uint width, uint count,
- uint linelen);
+#include <display_options.h>
/* common/main.c */
void main_loop (void);
extern char console_buffer[];
/* arch/$(ARCH)/lib/board.c */
-void board_init_f(ulong);
-void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
-int checkboard (void);
-int checkflash (void);
-int checkdram (void);
-int last_stage_init(void);
+void board_init_f(ulong);
+void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
+
+/**
+ * board_init_f_mem() - Allocate global data and set stack position
+ *
+ * This function is called by each architecture very early in the start-up
+ * code to set up the environment for board_init_f(). It allocates space for
+ * global_data (see include/asm-generic/global_data.h) and places the stack
+ * below this.
+ *
+ * This function requires a stack[1] Normally this is at @top. The function
+ * starts allocating space from 64 bytes below @top. First it creates space
+ * for global_data. Then it calls arch_setup_gd() which sets gd to point to
+ * the global_data space and can reserve additional bytes of space if
+ * required). Finally it allocates early malloc() memory
+ * (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this,
+ * and it returned by this function.
+ *
+ * [1] Strictly speaking it would be possible to implement this function
+ * in C on many archs such that it does not require a stack. However this
+ * does not seem hugely important as only 64 byte are wasted. The 64 bytes
+ * are used to handle the calling standard which generally requires pushing
+ * addresses or registers onto the stack. We should be able to get away with
+ * less if this becomes important.
+ *
+ * @top: Top of available memory, also normally the top of the stack
+ * @return: New stack location
+ */
+ulong board_init_f_mem(ulong top);
+
+/**
+ * arch_setup_gd() - Set up the global_data pointer
+ *
+ * This pointer is special in some architectures and cannot easily be assigned
+ * to. For example on x86 it is implemented by adding a specific record to its
+ * Global Descriptor Table! So we we provide a function to carry out this task.
+ * For most architectures this can simply be:
+ *
+ * gd = gd_ptr;
+ *
+ * @gd_ptr: Pointer to global data
+ */
+void arch_setup_gd(gd_t *gd_ptr);
+
+int checkboard(void);
+int show_board_info(void);
+int checkflash(void);
+int checkdram(void);
+int last_stage_init(void);
extern ulong monitor_flash_len;
int mac_read_from_eeprom(void);
extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
int update_flash_size(int flash_size);
int arch_early_init_r(void);
+/**
+ * arch_cpu_init_dm() - init CPU after driver model is available
+ *
+ * This is called immediately after driver model is available before
+ * relocation. This is similar to arch_cpu_init() but is able to reference
+ * devices
+ *
+ * @return 0 if OK, -ve on error
+ */
+int arch_cpu_init_dm(void);
+
+/**
+ * Reserve all necessary stacks
+ *
+ * This is used in generic board init sequence in common/board_f.c. Each
+ * architecture could provide this function to tailor the required stacks.
+ *
+ * On entry gd->start_addr_sp is pointing to the suggested top of the stack.
+ * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
+ * require only this can leave it untouched.
+ *
+ * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
+ * positions of the stack. The stack pointer(s) will be set to this later.
+ * gd->irq_sp is only required, if the architecture needs it.
+ *
+ * @return 0 if no error
+ */
+__weak int arch_reserve_stacks(void);
+
/**
* Show the DRAM size in a board-specific way
*
*
* @param size Size of DRAM (which should be displayed along with other info)
*/
-void board_show_dram(ulong size);
+void board_show_dram(phys_size_t size);
/**
* arch_fixup_fdt() - Write arch-specific information to fdt
#endif
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
-#ifdef CONFIG_LWMON
-extern uchar pic_read (uchar reg);
-extern void pic_write (uchar reg, uchar val);
-#endif
/*
* Set this up regardless of board
extern ssize_t spi_write (uchar *, int, uchar *, int);
#endif
-#ifdef CONFIG_EVB64260
-void evb64260_init(void);
-void debug_led(int, int);
-void display_mem_map(void);
-void perform_soft_reset(void);
-#endif
-
/* $(BOARD)/$(BOARD).c */
int board_early_init_f (void);
int board_late_init (void);
defined(CONFIG_8xx)
uint get_immr (uint);
#endif
-uint get_pir (void);
#if defined(CONFIG_MPC5xxx)
uint get_svr (void);
#endif
void trap_init (ulong);
#if defined (CONFIG_4xx) || \
defined (CONFIG_MPC5xxx) || \
- defined (CONFIG_74xx_7xx) || \
- defined (CONFIG_74x) || \
- defined (CONFIG_75x) || \
- defined (CONFIG_74xx) || \
defined (CONFIG_MPC85xx) || \
defined (CONFIG_MPC86xx) || \
defined (CONFIG_MPC83xx)
iter++, cpu = cpumask_next(cpu, mask)) \
int cpu_numcores (void);
+int cpu_num_dspcores(void);
u32 cpu_mask (void);
+u32 cpu_dsp_mask(void);
int is_core_valid (unsigned int);
int probecpu (void);
int checkcpu (void);
void invalidate_dcache_all(void);
void invalidate_icache_all(void);
+enum {
+ /* Disable caches (else flush caches but leave them active) */
+ CBL_DISABLE_CACHES = 1 << 0,
+ CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1,
+
+ CBL_ALL = 3,
+};
+
+/**
+ * Clean up ready for linux
+ *
+ * @param flags Flags to control what is done
+ */
+int cleanup_before_linux_select(int flags);
+
/* arch/$(ARCH)/lib/ticks.S */
uint64_t get_ticks(void);
void wait_ticks (unsigned long);
int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
int stoponerr, int offset);
+/**
+ * gzwrite progress indicators: defined weak to allow board-specific
+ * overrides:
+ *
+ * gzwrite_progress_init called on startup
+ * gzwrite_progress called during decompress/write loop
+ * gzwrite_progress_finish called at end of loop to
+ * indicate success (retcode=0) or failure
+ */
+void gzwrite_progress_init(u64 expected_size);
+
+void gzwrite_progress(int iteration,
+ u64 bytes_written,
+ u64 total_bytes);
+
+void gzwrite_progress_finish(int retcode,
+ u64 totalwritten,
+ u64 totalsize,
+ u32 expected_crc,
+ u32 calculated_crc);
+
+/**
+ * decompress and write gzipped image from memory to block device
+ *
+ * @param src compressed image address
+ * @param len compressed image length in bytes
+ * @param dev block device descriptor
+ * @param szwritebuf bytes per write (pad to erase size)
+ * @param startoffs offset in bytes of first write
+ * @param szexpected expected uncompressed length
+ * may be zero to use gzip trailer
+ * for files under 4GiB
+ */
+int gzwrite(unsigned char *src, int len,
+ struct block_dev_desc *dev,
+ unsigned long szwritebuf,
+ u64 startoffs,
+ u64 szexpected);
+
/* lib/qsort.c */
void qsort(void *base, size_t nmemb, size_t size,
int(*compar)(const void *, const void *));
int tstc(void);
/* stdout */
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
+#define putc(...) do { } while (0)
+#define puts(...) do { } while (0)
+#define printf(...) do { } while (0)
+#define vprintf(...) do { } while (0)
+#else
void putc(const char c);
void puts(const char *s);
int printf(const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
int vprintf(const char *fmt, va_list args);
+#endif
/* stderr */
#define eputc(c) fputc(stderr, c)
/* lib/net_utils.c */
#include <net.h>
-static inline IPaddr_t getenv_IPaddr(char *var)
+static inline struct in_addr getenv_ip(char *var)
{
return string_to_ip(getenv(var));
}
int cpu_release(int nr, int argc, char * const argv[]);
#endif
-/* Define a null map_sysmem() if the architecture doesn't use it */
-# ifndef CONFIG_ARCH_MAP_SYSMEM
-static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
-{
- return (void *)(uintptr_t)paddr;
-}
-
-static inline void unmap_sysmem(const void *vaddr)
-{
-}
-
-static inline phys_addr_t map_to_sysmem(const void *ptr)
-{
- return (phys_addr_t)(uintptr_t)ptr;
-}
-# endif
-
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_PPC
#define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \
DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
+#ifndef __ASSEMBLY__
+#include <malloc.h>
+
+static inline void *malloc_cache_aligned(size_t size)
+{
+ return memalign(ARCH_DMA_MINALIGN, ALIGN(size, ARCH_DMA_MINALIGN));
+}
+#endif
+
+/*
+ * check_member() - Check the offset of a structure member
+ *
+ * @structure: Name of structure (e.g. global_data)
+ * @member: Name of member (e.g. baudrate)
+ * @offset: Expected offset in bytes
+ */
+#define check_member(structure, member, offset) _Static_assert( \
+ offsetof(struct structure, member) == offset, \
+ "`struct " #structure "` offset for `" #member "` is not " #offset)
+
+/* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
+#ifdef CONFIG_EFI_STUB
+#define ll_boot_init() false
+#else
+#define ll_boot_init() true
+#endif
+
/* Pull in stuff for the build system */
#ifdef DO_DEPS_ONLY
# include <environment.h>
projects / karo-tx-uboot.git / blobdiff