karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / configs / BSC9132QDS.h

diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index e76a04b26253f48f608e87542037e13ec32f38dd..804493e645c5c9d57160f3cf9fa7b466af4a12e0 100644 (file)
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -11,6 +11,9 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
 #ifdef CONFIG_BSC9132QDS
 #define CONFIG_BSC9132
 #endif
@@ -41,7 +44,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
@@ -79,6 +81,7 @@
 #define CONFIG_BOOKE                   /* BOOKE */
 #define CONFIG_E500                    /* BOOKE e500 family */
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
+#define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_SYS_HAS_SERDES          /* common SERDES init code */
 
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
@@ -89,10 +92,8 @@
 #define CONFIG_FSL_PCIE_RESET          /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCI
 
-#define CONFIG_E1000                   /*  E1000 pci Ethernet card*/
 
 /*
  * PCI Windows
@@ -317,7 +318,6 @@ combinations. this should be removed later
 /* NAND */
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -354,13 +354,13 @@ combinations. this should be removed later
 #define CONFIG_SYS_CS2_FTIM1           (FTIM1_GPCM_TACO(0x0e) | \
                                        FTIM1_GPCM_TRAD(0x1f))
 #define CONFIG_SYS_CS2_FTIM2           (FTIM2_GPCM_TCS(0x0e) | \
-                                       FTIM2_GPCM_TCH(0x0) | \
+                                       FTIM2_GPCM_TCH(0x8) | \
                                        FTIM2_GPCM_TWP(0x1f))
 #define CONFIG_SYS_CS2_FTIM3           0x0
 #endif
 
 /* Set up IFC registers for boot location NOR/NAND */
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
 #define CONFIG_SYS_CSOR0               CONFIG_SYS_NAND_CSOR
@@ -417,7 +417,6 @@ combinations. this should be removed later
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
-#define CONFIG_SERIAL_MULTI    1 /* Enable both serial ports */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
 #define CONFIG_SYS_BAUDRATE_TABLE      \
@@ -484,7 +483,6 @@ combinations. this should be removed later
 /* eSPI - Enhanced SPI */
 #define CONFIG_FSL_ESPI  /* SPI */
 #ifdef CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_SPANSION
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED                10000000
@@ -580,8 +578,6 @@ combinations. this should be removed later
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
@@ -590,7 +586,6 @@ combinations. this should be removed later
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
@@ -599,6 +594,12 @@ combinations. this should be removed later
 #define CONFIG_DOS_PARTITION
 #endif
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -630,6 +631,27 @@ combinations. this should be removed later
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #endif
 
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash,"
+#define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
+                       "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
+                       "8m(kernel),512k(dtb),-(fs)"
+#endif
+/*
+ * Override partitions in device tree using info
+ * in "mtdparts" environment variable
+ */
+#ifdef CONFIG_CMD_MTDPARTS
+#define CONFIG_FDT_FIXUP_PARTITIONS
+#endif
+
 /*
  * Environment Configuration
  */
@@ -645,6 +667,7 @@ combinations. this should be removed later
 #define CONFIG_UBOOTPATH       "u-boot.bin"
 
 #define CONFIG_BAUDRATE                115200
+#define CONFIG_BOOTDELAY       10 /* -1 disable auto-boot */
 
 #ifdef CONFIG_SDCARD
 #define CONFIG_DEF_HWCONFIG    "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
@@ -705,4 +728,8 @@ combinations. this should be removed later
 
 #include <asm/fsl_secure_boot.h>
 
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
+#endif
+
 #endif /* __CONFIG_H */