karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / configs / BSC9132QDS.h

diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index f025e3197ba40a5d3ef508621e205dcbe5338fea..804493e645c5c9d57160f3cf9fa7b466af4a12e0 100644 (file)
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -11,6 +11,9 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
 #ifdef CONFIG_BSC9132QDS
 #define CONFIG_BSC9132
 #endif
@@ -22,7 +25,7 @@
 #define CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_SYS_TEXT_BASE           0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #endif
 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769     1
 #ifdef CONFIG_SPIFLASH
@@ -30,15 +33,21 @@
 #define CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_SYS_TEXT_BASE           0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
+#define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
+#endif
+#ifdef CONFIG_NAND_SECBOOT
+#define CONFIG_RAMBOOT_NAND
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE           0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 
@@ -47,7 +56,7 @@
 #define CONFIG_SPL_MAX_SIZE            8192
 #define CONFIG_SPL_RELOC_TEXT_BASE     0x00100000
 #define CONFIG_SPL_RELOC_STACK         0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((768 << 10) - 0x2000)
 #define CONFIG_SYS_NAND_U_BOOT_DST     (0x00200000 - CONFIG_SPL_MAX_SIZE)
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0
@@ -55,7 +64,7 @@
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0x8ff80000
+#define CONFIG_SYS_TEXT_BASE           0x8ff40000
 #endif
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -71,8 +80,8 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE                   /* BOOKE */
 #define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_MPC85xx
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
+#define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_SYS_HAS_SERDES          /* common SERDES init code */
 
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
@@ -83,10 +92,8 @@
 #define CONFIG_FSL_PCIE_RESET          /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCI
 
-#define CONFIG_E1000                   /*  E1000 pci Ethernet card*/
 
 /*
  * PCI Windows
@@ -311,7 +318,6 @@ combinations. this should be removed later
 /* NAND */
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -348,13 +354,13 @@ combinations. this should be removed later
 #define CONFIG_SYS_CS2_FTIM1           (FTIM1_GPCM_TACO(0x0e) | \
                                        FTIM1_GPCM_TRAD(0x1f))
 #define CONFIG_SYS_CS2_FTIM2           (FTIM2_GPCM_TCS(0x0e) | \
-                                       FTIM2_GPCM_TCH(0x0) | \
+                                       FTIM2_GPCM_TCH(0x8) | \
                                        FTIM2_GPCM_TWP(0x1f))
 #define CONFIG_SYS_CS2_FTIM3           0x0
 #endif
 
 /* Set up IFC registers for boot location NOR/NAND */
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
 #define CONFIG_SYS_CSOR0               CONFIG_SYS_NAND_CSOR
@@ -397,7 +403,7 @@ combinations. this should be removed later
                                                - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN         (256 * 1024) /* Reserve 256 kB for Mon*/
+#define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)   /* Reserved for malloc*/
 
 /* Serial Port */
@@ -411,7 +417,6 @@ combinations. this should be removed later
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
-#define CONFIG_SERIAL_MULTI    1 /* Enable both serial ports */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
 #define CONFIG_SYS_BAUDRATE_TABLE      \
@@ -478,7 +483,6 @@ combinations. this should be removed later
 /* eSPI - Enhanced SPI */
 #define CONFIG_FSL_ESPI  /* SPI */
 #ifdef CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_SPANSION
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED                10000000
@@ -540,6 +544,7 @@ combinations. this should be removed later
  */
 #if defined(CONFIG_RAMBOOT_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_SIZE                        0x2000
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
@@ -551,10 +556,10 @@ combinations. this should be removed later
 #define CONFIG_ENV_OFFSET      0x100000        /* 1MB */
 #define CONFIG_ENV_SECT_SIZE   0x10000
 #define CONFIG_ENV_SIZE                0x2000
-#elif defined(CONFIG_NAND)
+#elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET      ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_OFFSET      ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE)
 #elif defined(CONFIG_SYS_RAMBOOT)
 #define CONFIG_ENV_IS_NOWHERE          /* Store ENV in memory only */
@@ -562,13 +567,9 @@ combinations. this should be removed later
 #define CONFIG_ENV_SIZE                        0x2000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
-#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
-#define CONFIG_ENV_ADDR        0xfff80000
-#else
 #define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#endif
 #define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
+#define CONFIG_ENV_SECT_SIZE   0x20000
 #endif
 
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
@@ -577,8 +578,6 @@ combinations. this should be removed later
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
@@ -587,7 +586,6 @@ combinations. this should be removed later
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
@@ -596,6 +594,12 @@ combinations. this should be removed later
 #define CONFIG_DOS_PARTITION
 #endif
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -627,6 +631,27 @@ combinations. this should be removed later
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #endif
 
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash,"
+#define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
+                       "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
+                       "8m(kernel),512k(dtb),-(fs)"
+#endif
+/*
+ * Override partitions in device tree using info
+ * in "mtdparts" environment variable
+ */
+#ifdef CONFIG_CMD_MTDPARTS
+#define CONFIG_FDT_FIXUP_PARTITIONS
+#endif
+
 /*
  * Environment Configuration
  */
@@ -642,6 +667,7 @@ combinations. this should be removed later
 #define CONFIG_UBOOTPATH       "u-boot.bin"
 
 #define CONFIG_BAUDRATE                115200
+#define CONFIG_BOOTDELAY       10 /* -1 disable auto-boot */
 
 #ifdef CONFIG_SDCARD
 #define CONFIG_DEF_HWCONFIG    "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
@@ -700,4 +726,10 @@ combinations. this should be removed later
 
 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 
+#include <asm/fsl_secure_boot.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
+#endif
+
 #endif /* __CONFIG_H */