Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

[karo-tx-uboot.git] / include / configs / CPCI405AB.h

diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 41795a7726462d95e6fbd23b7e1794c37092fc92..a042abf1574da90a6914d6814dd4bcec968f2166 100644 (file)
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -39,7 +39,10 @@
 #define CONFIG_CPCI405_VER2    1       /* ...version 2                 */
 #define CONFIG_CPCI405AB       1       /* ...and special AB version    */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
+#define CONFIG_MISC_INIT_R      1      /* call misc_init_r()           */
 
 #define CONFIG_SYS_CLK_FREQ    33330000 /* external frequency to pll   */
 
@@ -132,6 +135,12 @@
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK            /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD       691200
 
@@ -189,6 +198,8 @@
 #define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
 #define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
+#define CONFIG_PCI_4xx_PTM_OVERWRITE   1 /* overwrite PTMx settings by env */
+
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
@@ -256,6 +267,7 @@
  * I2C EEPROM (CAT24WC32) for environment
  */
 #define CONFIG_HARD_I2C                        /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 
@@ -376,18 +388,8 @@
 #define CONFIG_SYS_INIT_DCACHE_CS      7       /* use cs # 7 for data cache memory    */
 
 #define CONFIG_SYS_INIT_RAM_ADDR       0x40000000  /* use data cache                  */
-#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in RAM             */
-#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000  /* Size of used area in RAM            */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */