/*
- * (C) Copyright 2000, 2001
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* David Updegraff, Cray, Inc. dave@cray.com: our 405 is walnut-lite..
*
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address; handling of ENET */
-#define CONFIG_BOARD_PRE_INIT 1 /* early setup for 405gp */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* early setup for 405gp */
#define CONFIG_MISC_INIT_R 1 /* so that a misc_init_r() is called */
/* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to
* keep possible initrd ramdisk decompression out. This is in k (1024 bytes)
- #define CONFIG_PRAM 16
+ #define CONFIG_PRAM 16
*/
#define CONFIG_LOADADDR 0x100000 /* where TFTP images go */
#undef CONFIG_BOOTARGS
#define CFG_AUTOLOAD "no"
#define CONFIG_BOOTCOMMAND "dhcp"
-/*
+/*
* ..during experiments..
#define CONFIG_SERVERIP 10.0.0.1
- #define CONFIG_ETHADDR 00:40:a6:80:14:5
+ #define CONFIG_ETHADDR 00:40:a6:80:14:5
*/
#define CONFIG_HARD_I2C 1 /* hardware support for i2c */
#define CONFIG_SDRAM_BANK0 1
#define CONFIG_AUTOSCRIPT 1
-#define CONFIG_COMMANDS (\
- CFG_CMD_BDI|\
- CFG_CMD_IMI|\
- CFG_CMD_FLASH|\
- CFG_CMD_MEMORY|\
- CFG_CMD_NET|\
- CFG_CMD_ENV|\
- CFG_CMD_CONSOLE|\
- CFG_CMD_ASKENV|\
- CFG_CMD_ECHO|\
- CFG_CMD_IMMAP|\
- CFG_CMD_REGINFO|\
- CFG_CMD_DHCP|\
- CFG_CMD_DATE|\
- CFG_CMD_RUN|\
- CFG_CMD_I2C|\
- CFG_CMD_EEPROM|\
- CFG_CMD_DIAG|\
- CFG_CMD_AUTOSCRIPT|\
- CFG_CMD_SETGETDCR)
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SETGETDCR
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_VENDOREX
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_BOOTFILESIZE
+
/*
- * optional BOOTP / DHCP fields
- */
-#define CONFIG_BOOTP_MASK (\
- CONFIG_BOOTP_VENDOREX|\
- CONFIG_BOOTP_SUBNETMASK|\
- CONFIG_BOOTP_GATEWAY|\
- CONFIG_BOOTP_DNS|\
- CONFIG_BOOTP_HOSTNAME|\
- CONFIG_BOOTP_BOOTFILESIZE|\
- CONFIG_BOOTP_BOOTPATH)
-
-/*
* how many time to fail & restart a net-TFTP before giving up & resetting
* the board hoping that a reset of net interface might help..
*/
#define CONFIG_NET_RESET 5
-/*
+/*
* bauds. Just to make it compile; in our case, I read the base_baud
* from the DCR anyway, so its kinda-tied to the above ref. clock which in turn
* drives the system clock.
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_LOAD_ADDR 0x100000/* where to load what we get from TFTP */
+#define CFG_LOAD_ADDR 0x100000 /* where to load what we get from TFTP */
#define CFG_TFTP_LOADADDR CFG_LOAD_ADDR
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_DRAM_TEST 1
/*-----------------------------------------------------------------------
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
/* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector */
-#define CFG_ENV_OFFSET 0x3c8000
+#define CFG_ENV_OFFSET 0x3c8000
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment area */
#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
#define CFG_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */
#define CFG_MALLOC_LEN (128 << 10) /* 128k for malloc space */
#define CFG_MEM_END_USAGE ( CFG_MONITOR_LEN \
- + CFG_MALLOC_LEN \
- + CFG_ENV_SECT_SIZE \
- + CFG_STACK_USAGE )
+ + CFG_MALLOC_LEN \
+ + CFG_ENV_SECT_SIZE \
+ + CFG_STACK_USAGE )
#define CFG_MEMTEST_END (CFG_SDRAM_SIZE * 1024 * 1024 - CFG_MEM_END_USAGE)
/* END ENVIRONNEMENT FLASH */
-/*-----------------------------------------------------------------------
- * Cache Configuration. Only used to ..?? clear it, I guess..
- */
-#define CFG_DCACHE_SIZE 16384
-#define CFG_CACHELINE_SIZE 32
-
/*
* Init Memory Controller:
*
#else
#define CFG_OCM_DATA_ADDR 0xF0000000
#define CFG_OCM_DATA_SIZE 0x1000
-#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
projects / karo-tx-uboot.git / blobdiff