i2c, soft-i2c: switch to new multibus/multiadapter support

[karo-tx-uboot.git] / include / configs / DU440.h

diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 508a0cae3d830c2fda8e5fa7f8fb447a328a9563..152821f56766474eb8246e5565b6dacffb839ab8 100644 (file)
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -37,6 +37,10 @@
 #define CONFIG_4xx             1               /* ... PPC4xx family    */
 #define CONFIG_SYS_CLK_FREQ    33333400        /* external freq to pll */
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFFFA0000
+#endif
+
 #define CONFIG_BOARD_EARLY_INIT_F 1            /* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R     1               /* Call misc_init_r     */
 #define CONFIG_LAST_STAGE_INIT  1               /* last_stage_init      */
@@ -51,7 +55,7 @@
 #define CONFIG_SYS_BOOT_BASE_ADDR      0xf0000000
 #define CONFIG_SYS_SDRAM_BASE          0x00000000      /* _must_ be 0          */
 #define CONFIG_SYS_FLASH_BASE          0xfc000000      /* start of FLASH       */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND0_ADDR          0xd0000000      /* NAND Flash           */
 #define CONFIG_SYS_NAND1_ADDR          0xd0100000      /* NAND Flash           */
 #define CONFIG_SYS_OCM_BASE            0xe0010000      /* ocm                  */
@@ -60,11 +64,9 @@
 #define CONFIG_SYS_PCI_MEMBASE1        CONFIG_SYS_PCI_MEMBASE  + 0x10000000
 #define CONFIG_SYS_PCI_MEMBASE2        CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
 #define CONFIG_SYS_PCI_MEMBASE3        CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
-#define CONFIG_SYS_PCI_IOBASE          0xe8000000
-
-
-/* Don't change either of these */
-#define CONFIG_SYS_PERIPHERAL_BASE     0xef600000      /* internal peripherals */
+#define CONFIG_SYS_PCI_IOBASE          0xe8000000
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID PCI_VENDOR_ID_ESDGMBH
+#define CONFIG_SYS_PCI_SUBSYS_ID       0x0444          /* device ID for DU440 */
 
 #define CONFIG_SYS_USB2D0_BASE         0xe0000100
 #define CONFIG_SYS_USB_DEVICE          0xe0000000
@@ -77,18 +79,20 @@
 #define CONFIG_SYS_INIT_RAM_OCM        1               /* OCM as init ram      */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_BASE     /* OCM                  */
 
-#define CONFIG_SYS_INIT_RAM_END        (4 << 10)
-#define CONFIG_SYS_GBL_DATA_SIZE       256             /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       (4 << 10)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Serial Port
  */
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SERIAL_MULTI     1
-#undef CONFIG_UART1_CONSOLE
 
 #define CONFIG_SYS_BAUDRATE_TABLE                                              \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -167,10 +171,9 @@
  * I2C
  */
 #define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
-#undef CONFIG_SOFT_I2C                 /* I2C bit-banged               */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_I2C_CMD_TREE     1
 #define CONFIG_I2C_MULTI_BUS    1
 
 #define CONFIG_SYS_SPD_BUS_NUM         0
@@ -253,6 +256,7 @@
 int du440_phy_addr(int devnum);
 #endif
 
+#define CONFIG_PPC4xx_EMAC
 #define        CONFIG_IBM_EMAC4_V4     1
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                du440_phy_addr(0) /* PHY address        */
@@ -263,7 +267,6 @@ int du440_phy_addr(int devnum);
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER       128
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR       du440_phy_addr(1)
 
@@ -289,14 +292,13 @@ int du440_phy_addr(int devnum);
 
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BMP
+#define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DTT
 #define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
@@ -308,9 +310,10 @@ int du440_phy_addr(int devnum);
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_USB
 
 #define CONFIG_SUPPORT_VFAT
 
@@ -353,6 +356,7 @@ int du440_phy_addr(int devnum);
  * PCI stuff
  */
 #define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_PNP                 /* do (not) pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup  */
 #define CONFIG_SYS_PCI_TARGBASE       0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
@@ -410,25 +414,16 @@ int du440_phy_addr(int devnum);
  * NAND FLASH
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE     2
-#define NAND_MAX_CHIPS         CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_NAND_SELECT_DEVICE  1       /* nand driver supports mutipl. chips */
 #define CONFIG_SYS_NAND_BASE_LIST      {CONFIG_SYS_NAND0_ADDR + CONFIG_SYS_NAND0_CS, \
                                 CONFIG_SYS_NAND1_ADDR + CONFIG_SYS_NAND1_CS}
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
-#define CONFIG_AUTOSCRIPT      1
+#define CONFIG_SOURCE          1
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP