rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH

[karo-tx-uboot.git] / include / configs / EB+MCF-EV123.h

diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index 720b335b099158ce83733ab331c4ee63c53a442b..80a6cb7bec68cd5f23387841e207156126be4994 100644 (file)
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -27,9 +27,7 @@
 
 #define  CONFIG_EB_MCF_EV123
 
-#undef DEBUG
 #undef CFG_HALT_BEFOR_RAM_JUMP
-#undef ET_DEBUG
 
 /*
  * High Level Configuration Options (easy to change)
@@ -40,9 +38,8 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define FEC_ENET
-#define CONFIG_ETHADDR 00:CF:52:82:EB:01
-
+#define CONFIG_MCFUART
+#define CFG_UART_PORT          (0)
 #define CONFIG_BAUDRATE 9600
 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
 
@@ -56,7 +53,7 @@
 #ifndef CONFIG_MONITOR_IS_IN_RAM
 #define CFG_ENV_ADDR           0xF003C000      /* End of 256K */
 #define CFG_ENV_SECT_SIZE      0x4000
-#define CFG_ENV_IS_IN_FLASH    1
+#define CONFIG_ENV_IS_IN_FLASH 1
 /*
 #define CFG_ENV_IS_EMBEDDED    1
 #define CFG_ENV_ADDR_REDUND            0xF0018000
@@ -65,20 +62,67 @@
 #else
 #define CFG_ENV_ADDR           0xFFE04000
 #define CFG_ENV_SECT_SIZE      0x2000
-#define CFG_ENV_IS_IN_FLASH    1
+#define CONFIG_ENV_IS_IN_FLASH 1
 #endif
 
-/*#define CONFIG_COMMANDS  ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */
-#define CONFIG_COMMANDS  ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB))
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+#define CONFIG_MCFTMR
+
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#      define CONFIG_NET_MULTI         1
+#      define CONFIG_MII               1
+#      define CONFIG_MII_INIT          1
+#      define CFG_DISCOVER_PHY
+#      define CFG_RX_ETH_BUFFER        8
+#      define CFG_FAULT_ECHO_LINK_DOWN
+
+#      define CFG_FEC0_PINMUX          0
+#      define CFG_FEC0_MIIBASE         CFG_FEC0_IOBASE
+#      define MCFFEC_TOUT_LOOP         50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+#      ifndef CFG_DISCOVER_PHY
+#              define FECDUPLEX        FULL
+#              define FECSPEED         _100BASET
+#      else
+#              ifndef CFG_FAULT_ECHO_LINK_DOWN
+#                      define CFG_FAULT_ECHO_LINK_DOWN
+#              endif
+#      endif                   /* CFG_DISCOVER_PHY */
+#endif
+
+#ifdef CONFIG_MCFFEC
+#      define CONFIG_ETHADDR   00:CF:52:82:EB:01
+#      define CONFIG_IPADDR    192.162.1.2
+#      define CONFIG_NETMASK   255.255.255.0
+#      define CONFIG_SERVERIP  192.162.1.1
+#      define CONFIG_GATEWAYIP 192.162.1.1
+#      define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif                         /* CONFIG_MCFFEC */
 
 #define CONFIG_BOOTDELAY       5
 #define CFG_PROMPT             "\nEV123 U-Boot> "
 #define        CFG_LONGHELP                            /* undef to save memory         */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE              1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE              256             /* Console I/O Buffer Size      */
@@ -110,15 +154,12 @@
  */
 #define        CFG_MBAR                0x40000000
 
-#define        CFG_DISCOVER_PHY
-/* #define     CFG_ENET_BD_BASE        0x380000 */
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CFG_INIT_RAM_ADDR       0x20000000
 #define CFG_INIT_RAM_END       0x10000         /* End of used area in internal SRAM    */
-#define CFG_GBL_DATA_SIZE      64              /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE      64              /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET     CFG_GBL_DATA_OFFSET
 
@@ -139,6 +180,7 @@
 
 #define CFG_FLASH_BASE         0xFFE00000
 #define        CFG_INT_FLASH_BASE      0xF0000000
+#define CFG_INT_FLASH_ENABLE   0x21
 
 /* If M5282 port is fully implemented the monitor base will be behind
  * the vector table. */
@@ -179,13 +221,13 @@
 #define CFG_CS0_BASE           CFG_FLASH_BASE
 #define CFG_CS0_SIZE           2*1024*1024
 #define CFG_CS0_WIDTH          16
-#define CFG_CS0_RO             0
+#define CFG_CS0_RO             0
 #define CFG_CS0_WS             6
 
 #define CFG_CS3_BASE           0xE0000000
 #define CFG_CS3_SIZE           1*1024*1024
 #define CFG_CS3_WIDTH          16
-#define CFG_CS3_RO             0
+#define CFG_CS3_RO             0
 #define CFG_CS3_WS             6
 
 /*-----------------------------------------------------------------------
@@ -210,7 +252,7 @@
 #define CFG_PEHLPAR            0xC0
 #define CFG_PUAPAR             0x0F            /* UA0..UA3 = Uart 0 +1 */
 #define CFG_DDRUA              0x05
-#define CFG_PJPAR              0xFF;
+#define CFG_PJPAR              0xFF;
 
 /*-----------------------------------------------------------------------
  * CCM configuration