sniper: Pass serial number through ATAG

[karo-tx-uboot.git] / include / configs / M5235EVB.h

diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 6d624dca5a0fe15d6a67052a38550dfcdaa6161f..ae11e7d87953577e8845ee147edd316246ecded1 100644 (file)
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -4,23 +4,7 @@
  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -34,13 +18,10 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MCF523x         /* define processor family */
-#define CONFIG_M5235           /* define processor type */
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT        5000    /* timeout in milliseconds, max timeout is 6.71sec */
@@ -54,28 +35,18 @@
 #define CONFIG_BOOTP_HOSTNAME
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BOOTD
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
-#define CONFIG_CMD_FLASH
 #define CONFIG_CMD_I2C
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
@@ -101,12 +72,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C                /* I2C with hw support */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED           80000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_OFFSET          0x00000300
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_i2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       80000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x00000300
 #define CONFIG_SYS_IMMR                CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG      (gpio->par_qspi)
 #define CONFIG_SYS_I2C_PINMUX_CLR      ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
@@ -116,12 +86,10 @@
 #define CONFIG_BOOTDELAY       1       /* autoboot after 5 seconds */
 #define CONFIG_BOOTFILE                "u-boot.bin"
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_ETHADDR   00:e0:0c:bc:e5:60
 #      define CONFIG_IPADDR    192.162.1.2
 #      define CONFIG_NETMASK   255.255.255.0
 #      define CONFIG_SERVERIP  192.162.1.1
 #      define CONFIG_GATEWAYIP 192.162.1.1
-#      define CONFIG_OVERWRITE_ETHADDR_ONCE
 #endif                         /* FEC_ENET */
 
 #define CONFIG_HOSTNAME                M5235EVB
@@ -152,7 +120,6 @@
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 #define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE+0x20000)
 
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CLK                 75000000
 #define CONFIG_SYS_CPU_CLK             CONFIG_SYS_CLK * 2
 
@@ -169,8 +136,7 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x10000 /* Size of used area in internal SRAM */
 #define CONFIG_SYS_INIT_RAM_CTRL       0x21
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE - 0x10)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE - 0x10)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -222,6 +188,11 @@
  * Environment is embedded in u-boot in the second sector of the flash
  */
 #define CONFIG_ENV_IS_IN_FLASH 1
+
+#define LDS_BOARD_TEXT \
+       . = DEFINED(env_offset) ? env_offset : .; \
+       common/env_embedded.o (.text);
+
 #ifdef NORFLASH_PS32BIT
 #      define CONFIG_ENV_OFFSET                (0x8000)
 #      define CONFIG_ENV_SIZE          0x4000