]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/configs/M53017EVB.h
sniper: Pass serial number through ATAG
[karo-tx-uboot.git] / include / configs / M53017EVB.h
index d983a8fedb7060b8d75a6502996f232931023f62..817b142bf98b049d2cdc4d9316f2d1d40ff43739 100644 (file)
@@ -4,23 +4,7 @@
  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MCF5301x                /* define processor family */
-#define CONFIG_M53015          /* define processor type */
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT                5000
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_ELF
-#define CONFIG_CMD_FLASH
 #undef CONFIG_CMD_I2C
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
@@ -64,7 +39,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C                        /* I2C with hw support */
-#undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED           80000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_OFFSET          0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       80000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x58000
 #define CONFIG_SYS_IMMR                        CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY               1       /* autoboot after 5 seconds */
 #define CONFIG_UDP_CHECKSUM
 
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_ETHADDR   00:e0:0c:bc:e5:60
-#      define CONFIG_ETH1ADDR  00:e0:0c:bc:e5:61
 #      define CONFIG_IPADDR    192.162.1.2
 #      define CONFIG_NETMASK   255.255.255.0
 #      define CONFIG_SERVERIP  192.162.1.1
 #      define CONFIG_GATEWAYIP 192.162.1.1
-#      define CONFIG_OVERWRITE_ETHADDR_ONCE
 #endif                         /* FEC_ENET */
 
 #define CONFIG_HOSTNAME                M53017
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Arg Buf Sz */
 #define CONFIG_SYS_LOAD_ADDR   0x40010000
 
-#define CONFIG_SYS_HZ          1000
 #define CONFIG_SYS_CLK         80000000
 #define CONFIG_SYS_CPU_CLK     CONFIG_SYS_CLK * 3
 
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x80000000
-#define CONFIG_SYS_INIT_RAM_END                0x20000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE               0x20000 /* Size of used area in internal SRAM */
 #define CONFIG_SYS_INIT_RAM_CTRL       0x221
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_GBL_DATA_OFFSET     ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CONFIG_ENV_OFFSET              0x8000
+#define CONFIG_ENV_OFFSET              (CONFIG_SYS_FLASH_BASE + 0x40000)
 #define CONFIG_ENV_SIZE                        0x1000
 #define CONFIG_ENV_SECT_SIZE           0x8000
 #define CONFIG_ENV_IS_IN_FLASH         1
 
+#define LDS_BOARD_TEXT \
+       . = DEFINED(env_offset) ? env_offset : .; \
+       common/env_embedded.o       (.text*)
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_END - 8)
+                                        CONFIG_SYS_INIT_RAM_SIZE - 8)
 #define DCACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_END - 4)
+                                        CONFIG_SYS_INIT_RAM_SIZE - 4)
 #define CONFIG_SYS_ICACHE_INV          (CF_CACR_CINVA)
 #define CONFIG_SYS_CACHE_ACR0          (CONFIG_SYS_SDRAM_BASE | \
                                         CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \