karo: tx6: enable FDT support for MFG U-Boot build

[karo-tx-uboot.git] / include / configs / MPC8540ADS.h

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index fc0edacede217b8c9542190cdc922614f8375f5b..acd37a01aa75ca4c5dbffbf64c8da34531f74d92 100644 (file)
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -3,23 +3,7 @@
  * (C) Copyright 2002,2003 Motorola,Inc.
  * Xianghua Xiao <X.Xiao@motorola.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+ 
  */
 
 /*
@@ -52,6 +36,7 @@
 #endif
 
 #define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -249,7 +234,6 @@
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -260,13 +244,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}  /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET          0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x69} }
 
 /* RapidIO MMU */
 #define CONFIG_SYS_RIO_MEM_VIRT        0xc0000000      /* base address */
@@ -289,7 +272,6 @@
 
 #if defined(CONFIG_PCI)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -309,10 +291,6 @@
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
@@ -442,8 +420,8 @@
 #define CONFIG_IPADDR    192.168.1.253
 
 #define CONFIG_HOSTNAME                unknown
-#define CONFIG_ROOTPATH                /nfsroot
-#define CONFIG_BOOTFILE                your.uImage
+#define CONFIG_ROOTPATH                "/nfsroot"
+#define CONFIG_BOOTFILE                "your.uImage"
 
 #define CONFIG_SERVERIP  192.168.1.1
 #define CONFIG_GATEWAYIP 192.168.1.1