i2c, soft-i2c: switch to new multibus/multiadapter support

[karo-tx-uboot.git] / include / configs / P2020COME.h

diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index cf20d2b2eee2bf5444da0b9ea1db3ba50b8e4d4c..c8f5a85ded4fa55d429a5ef42b575887c30c001a 100644 (file)
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010,2012 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -58,6 +58,7 @@
 #define CONFIG_PCIE3           1       /* PCIE controller 3 (slot 3) */
 
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 #endif /* #if defined(CONFIG_PCI) */
@@ -201,7 +202,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
 
-#define CONFIG_SERIAL_MULTI    1 /* Enable both serial ports */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
 #define CONFIG_SYS_BAUDRATE_TABLE   \
@@ -212,9 +212,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /*
  * Pass open firmware flat tree
@@ -230,7 +227,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /* I2C */
 #define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C                /* I2C with hardware support */
-#undef  CONFIG_SOFT_I2C                /* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address*/
@@ -350,6 +346,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #if defined(CONFIG_RAMBOOT_SDCARD)
        #define CONFIG_ENV_IS_IN_MMC    1
+       #define CONFIG_FSL_FIXED_MMC_LOCATION
        #define CONFIG_ENV_SIZE         0x2000
        #define CONFIG_SYS_MMC_ENV_DEV  0
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
@@ -398,6 +395,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 #endif /* CONFIG_MMC */
 
+#define CONFIG_HAS_FSL_DR_USB
+#ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
@@ -405,7 +404,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_USB_STORAGE
-#define CONFIG_HAS_FSL_DR_USB
+#endif
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
@@ -415,8 +414,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 /* Misc Extra Settings */
-#define CONFIG_SYS_64BIT_VSPRINTF      1
-#define CONFIG_SYS_64BIT_STRTOUL       1
 #define CONFIG_CMD_DHCP                        1
 
 #define CONFIG_CMD_DATE                        1