karo: tx6: fix MFG-U-Boot environment setting

[karo-tx-uboot.git] / include / configs / PIP405.h

diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 242aa314a1a07dc8915d666301f5cda8ceba6541..9a1b2acac3bdc24dca5c8e1704953f1c79c07d89 100644 (file)
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -33,11 +17,12 @@
  * (easy to change)
  ***********************************************************/
 #define CONFIG_405GP           1       /* This is a PPC405 CPU         */
-#define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_PIP405          1       /* ...on a PIP405 board         */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF80000
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /***********************************************************
  * Clock
  ***********************************************************/
@@ -79,7 +64,6 @@
 #define CONFIG_CMD_BSP
 
 #define         CONFIG_SYS_HUSH_PARSER
-#define         CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 /**************************************************************
  * I2C Stuff:
  * the PIP405 is equiped with an Atmel 24C128/256 EEPROM at address
@@ -88,10 +72,11 @@
  * EEPROM of the SDRAM
  * The Atmel EEPROM uses 16Bit addressing.
  ***************************************************************/
-#define CONFIG_HARD_I2C                        /* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
-#define CONFIG_SYS_I2C_SPEED           50000   /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          50000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x53
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
@@ -159,7 +144,6 @@
  * Miscellaneous configurable options
  **********************************************************/
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
@@ -189,8 +173,6 @@
 #define CONFIG_SYS_LOAD_ADDR           0x400000        /* default load address */
 #define CONFIG_SYS_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1 ms ticks */
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
@@ -200,6 +182,7 @@
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
 #define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host        */
 #define CONFIG_PCI_PNP                 /* pci plug-and-play            */
                                        /* resource configuration       */
@@ -371,7 +354,6 @@
  ************************************************************/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /************************************************************