rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH

[karo-tx-uboot.git] / include / configs / SXNI855T.h

diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index c1c765f39d000e11054924bc8ec58a460af5a475..67b6071be1d4b78f02f84db980e192acafaeef90 100644 (file)
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -146,14 +146,26 @@
 
 #define CFG_DISCOVER_PHY
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL         | \
-                                CFG_CMD_EEPROM         | \
-                                CFG_CMD_JFFS2          | \
-                                CFG_CMD_NAND           | \
-                                CFG_CMD_DATE)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+
 
 #define CFG_JFFS2_SORT_FRAGMENTS
 
@@ -183,6 +195,7 @@
 */
 
 /* NAND flash support */
+#define CONFIG_NAND_LEGACY
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CFG_MAX_NAND_DEVICE    1       /* Max number of NAND devices   */
 #define SECTORSIZE 512
@@ -191,7 +204,7 @@
 #define ADDR_PAGE 2
 #define ADDR_COLUMN_PAGE 3
 
-#define NAND_ChipID_UNKNOWN    0x00
+#define NAND_ChipID_UNKNOWN    0x00
 #define NAND_MAX_FLOORS 1
 #define NAND_MAX_CHIPS 1
 
@@ -225,7 +238,7 @@
  */
 #define        CFG_LONGHELP                    /* undef to save a little memory */
 #define        CFG_PROMPT              "=>"    /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE      256             /* Console I/O Buffer Size      */
@@ -237,7 +250,7 @@
 #define CFG_MEMTEST_START      0x0100000       /* memtest works on     */
 #define CFG_MEMTEST_END                0x0400000       /* 1 ... 4 MB in DRAM   */
 
-#define CFG_LOAD_ADDR          0x00100000
+#define CFG_LOAD_ADDR          0x00100000
 
 #define        CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 
@@ -308,7 +321,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     16      /* For all MPC8xx CPUs                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif
 
@@ -436,8 +449,8 @@
 
 #define CONFIG_RESET_ON_PANIC          /* reset if system panic() */
 
-#define CFG_ENV_IS_IN_FLASH
-#ifdef CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
   /* environment is in FLASH */
   #define CFG_ENV_ADDR         0xF8040000      /* AM29LV641 or AM29LV800BT */
   #define CFG_ENV_ADDR_REDUND  0xF8050000      /* AM29LV641 or AM29LV800BT */
@@ -445,14 +458,14 @@
   #define CFG_ENV_SIZE         0x00002000
 #else
   /* environment is in EEPROM */
-  #define CFG_ENV_IS_IN_EEPROM         1
+  #define CONFIG_ENV_IS_IN_EEPROM              1
   #define CFG_ENV_OFFSET               0       /* at beginning of EEPROM */
   #define CFG_ENV_SIZE              1024       /* Use only a part of it*/
 #endif
 
 #if 1
 #define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
-#define CONFIG_AUTOBOOT_PROMPT         "autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT         "autoboot in %d seconds\n", bootdelay
 #define CONFIG_AUTOBOOT_DELAY_STR      "delayabit"
 #define CONFIG_AUTOBOOT_STOP_STR       " " /* easy to stop for now */
 #endif