powerpc/mpc85xx:Increase binary size for P, B & T series boards.

[karo-tx-uboot.git] / include / configs / T1040RDB.h

diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h
index 79312311d8b5a8ebbb02f2140d938bd025f43443..65b4b26a09e2b6fc259f718f75fa6f281f70055a 100644 (file)
--- a/include/configs/T1040RDB.h
+++ b/include/configs/T1040RDB.h
@@ -44,7 +44,7 @@
 #define CONFIG_MP                      /* support multiple processors */
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xeff80000
+#define CONFIG_SYS_TEXT_BASE   0xeff40000
 #endif
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -92,12 +92,12 @@
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV          0
 #define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              (512 * 1105)
+#define CONFIG_ENV_OFFSET              (512 * 1658)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET              (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_OFFSET              (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
@@ -521,17 +521,17 @@
 #elif defined(CONFIG_SDCARD)
 /*
  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 545KB (1089 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
+ * about 825KB (1650 blocks), Env is stored after the image, and the env size is
+ * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1130)
+#define CONFIG_SYS_QE_FMAN_FW_ADDR     (512 * 1680)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_QE_FMAN_FW_ADDR     (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF40000
+#define CONFIG_SYS_QE_FMAN_FW_ADDR             0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
@@ -609,7 +609,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*