rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM

[karo-tx-uboot.git] / include / configs / TOP5200.h

diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 1cc9ce94f916aece0486b59b75264d4f6ab264da..083686c28d2fdf4fffc71a2221ff177da2170ea3 100644 (file)
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -50,10 +50,7 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM          0x02    /* Software reboot           */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /*
  * Serial console configuration
@@ -72,6 +69,7 @@
 #  define CONFIG_PCI           1
 #  define CONFIG_PCI_PNP               1
 #  define CONFIG_PCI_SCAN_SHOW 1
+#  define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE      1
 
 #  define CONFIG_PCI_MEM_BUS   0x40000000
 #  define CONFIG_PCI_MEM_PHYS  CONFIG_PCI_MEM_BUS
@@ -81,12 +79,6 @@
 #  define CONFIG_PCI_IO_PHYS   CONFIG_PCI_IO_BUS
 #  define CONFIG_PCI_IO_SIZE   0x01000000
 
-#  define ADD_PCI_CMD          CFG_CMD_PCI
-
-#else  /* no Evaluation board */
-
-#  define ADD_PCI_CMD          0  /* no CFG_CMD_PCI */
-
 #endif
 
 /* USB */
@@ -99,49 +91,49 @@
 #  else
 #    define CONFIG_USB_CONFIG  0x00001000
 #  endif
-#  define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #  define CONFIG_DOS_PARTITION
 #  define CONFIG_USB_STORAGE
 
-#else
-
-#  define ADD_USB_CMD          0
-
 #endif
 
 /* IDE */
 #if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
-
-#  define ADD_IDE_CMD             CFG_CMD_IDE | CFG_CMD_FAT
 #  define CONFIG_DOS_PARTITION
+#endif
 
-#else
 
-#  define ADD_IDE_CMD          0
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
 
-#endif
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               ADD_PCI_CMD     | \
-                               ADD_USB_CMD     | \
-                               ADD_IDE_CMD     | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_IMMAP   | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_BEDBUG  \
-                             )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_REGINFO
+
+#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_PCI
+#endif
+
 
 /*
  * MUST be low boot - HIGHBOOT is not supported anymore
@@ -159,7 +151,7 @@
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
-       "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+       "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
        "echo"
 
 #undef CONFIG_BOOTARGS
@@ -186,7 +178,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 
 /*
  * I2C configuration
@@ -279,7 +271,7 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_EEPROM   1       /* turn on EEPROM env feature */
+#define CONFIG_ENV_IS_IN_EEPROM        1       /* turn on EEPROM env feature */
 #define CFG_ENV_OFFSET         0x1000
 #define CFG_ENV_SIZE           0x0700
 
@@ -336,7 +328,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CBSIZE           1024    /* Console I/O Buffer Size  */
 #else
 #  define CFG_CBSIZE           256     /* Console I/O Buffer Size  */
@@ -352,6 +344,12 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
+
 #ifdef CONFIG_EVAL5200         /* M48T08 is available with the Evaluation board only */
   #define CONFIG_RTC_MK48T59   1       /* use M48T08 on EVAL5200 */
   #define RTC(reg)             (0xf0010000+reg)