"${optargs} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
- "dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
"nandrootfstype=ubifs rootwait=1\0" \
- "nandsrcaddr=0x280000\0" \
- "nandboot=echo Booting from nand ...; " \
+ "nandboot=echo Booting from nand ...; " \
"run nandargs; " \
- "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
- "bootm ${loadaddr}\0" \
- "nandimgsize=0x500000\0"
+ "nand read ${fdtaddr} u-boot-spl-os; " \
+ "nand read ${loadaddr} kernel; " \
+ "bootz ${loadaddr} - ${fdtaddr}\0"
#else
#define NANDARGS ""
#endif
"fdt_high=0xffffffff\0" \
"boot_fdt=try\0" \
"rdaddr=0x81000000\0" \
+ "bootpart=0:2\0" \
"bootdir=/boot\0" \
- "bootfile=uImage\0" \
+ "bootfile=zImage\0" \
"fdtfile=undefined\0" \
"console=ttyO0,115200n8\0" \
"optargs=\0" \
- "dfu_alt_info_mmc=" DFU_ALT_INFO_MMC "\0" \
- "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
- "bootpart=0:2\0" \
"rootpath=/export/rootfs\0" \
"nfsopts=nolock\0" \
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- "loaduimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
"mmcloados=run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdtaddr}; " \
+ "bootz ${loadaddr} - ${fdtaddr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"mmcboot=mmc dev ${mmcdev}; " \
"if mmc rescan; then " \
"echo Running uenvcmd ...;" \
"run uenvcmd;" \
"fi;" \
- "run mmcloados;" \
+ "if run loadimage; then " \
+ "run mmcloados;" \
+ "fi;" \
"fi;\0" \
"spiboot=echo Booting from spi ...; " \
"run spiargs; " \
"sf probe ${spibusno}:0; " \
"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
- "bootm ${loadaddr}\0" \
+ "bootz ${loadaddr}\0" \
"netboot=echo Booting from network ...; " \
"setenv autoload no; " \
"dhcp; " \
"tftp ${loadaddr} ${bootfile}; " \
"tftp ${fdtaddr} ${fdtfile}; " \
"run netargs; " \
- "bootm ${loadaddr} - ${fdtaddr}\0" \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
- "bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
+ "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
"findfdt="\
"if test $board_name = A335BONE; then " \
"setenv fdtfile am335x-bone.dtb; fi; " \
"setenv fdtfile am335x-evmsk.dtb; fi; " \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
- NANDARGS
+ NANDARGS \
+ DFUARGS
#endif
#define CONFIG_BOOTCOMMAND \
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
#define CONFIG_BAUDRATE 115200
-/* I2C Configuration */
#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_MULTI_EEPROMS
+/* PMIC support */
+#define CONFIG_POWER_TPS65217
+#define CONFIG_POWER_TPS65910
+
/* SPL */
#ifndef CONFIG_NOR_BOOT
+#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
+/* Bootcount using the RTC block */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_AM33XX
+
/* CPSW support */
#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
#ifdef CONFIG_NAND
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#endif
#define CONFIG_DFU_MMC
#define CONFIG_CMD_DFU
#define DFU_ALT_INFO_MMC \
+ "dfu_alt_info_mmc=" \
"boot part 0 1;" \
"rootfs part 0 2;" \
"MLO fat 0 1;" \
"spl-os-args fat 0 1;" \
"spl-os-image fat 0 1;" \
"u-boot.img fat 0 1;" \
- "uEnv.txt fat 0 1"
+ "uEnv.txt fat 0 1\0"
#ifdef CONFIG_NAND
#define CONFIG_DFU_NAND
#define DFU_ALT_INFO_NAND \
+ "dfu_alt_info_nand=" \
"SPL part 0 1;" \
"SPL.backup1 part 0 2;" \
"SPL.backup2 part 0 3;" \
"u-boot part 0 5;" \
"u-boot-spl-os part 0 6;" \
"kernel part 0 8;" \
- "rootfs part 0 9"
+ "rootfs part 0 9\0"
+#else
+#define DFU_ALT_INFO_NAND ""
#endif
+#define CONFIG_DFU_RAM
+#define DFU_ALT_INFO_RAM \
+ "dfu_alt_info_ram=" \
+ "kernel ram 0x80200000 0xD80000;" \
+ "fdt ram 0x80F80000 0x80000;" \
+ "ramdisk ram 0x81000000 0x4000000\0"
+#define DFUARGS \
+ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
+ DFU_ALT_INFO_MMC \
+ DFU_ALT_INFO_RAM \
+ DFU_ALT_INFO_NAND
/*
* Default to using SPI for environment, etc.
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 1
#define CONFIG_SYS_MMC_ENV_PART 2
+#define CONFIG_ENV_OFFSET 0x0
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#endif
/* SPI flash. */
projects / karo-tx-uboot.git / blobdiff