karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / configs / am335x_evm.h

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 560e3bf7755d55d37c1e5e9fb5de162568d9cc9f..e89c49e1e3a0a0f7c4c2b6c0f7080c2330af562d 100644 (file)
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -19,13 +19,11 @@
 #include <configs/ti_am335x_common.h>
 
 #ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_FIT
 # define CONFIG_FIT
+#endif
 # define CONFIG_TIMESTAMP
 # define CONFIG_LZO
-# ifdef CONFIG_ENABLE_VBOOT
-#  define CONFIG_FIT_SIGNATURE
-#  define CONFIG_RSA
-# endif
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN           (16 << 20)
@@ -47,8 +45,6 @@
 /* Enhance our eMMC support / experience. */
 #define CONFIG_CMD_GPT
 #define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
 
 #ifdef CONFIG_NAND
 #define NANDARGS \
@@ -58,12 +54,12 @@
                "${optargs} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
-       "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \
+       "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
        "nandrootfstype=ubifs rootwait=1\0" \
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
-               "nand read ${fdtaddr} u-boot-spl-os; " \
-               "nand read ${loadaddr} kernel; " \
+               "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
+               "nand read ${loadaddr} NAND.kernel; " \
                "bootz ${loadaddr} - ${fdtaddr}\0"
 #else
 #define NANDARGS ""
@@ -87,10 +83,6 @@
        "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 ro\0" \
        "mmcrootfstype=ext4 rootwait\0" \
-       "rootpath=/export/rootfs\0" \
-       "nfsopts=nolock\0" \
-       "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-               "::off\0" \
        "ramroot=/dev/ram0 rw\0" \
        "ramrootfstype=ext2\0" \
        "mmcargs=setenv bootargs console=${console} " \
@@ -106,11 +98,6 @@
                "${optargs} " \
                "root=${spiroot} " \
                "rootfstype=${spirootfstype}\0" \
-       "netargs=setenv bootargs console=${console} " \
-               "${optargs} " \
-               "root=/dev/nfs " \
-               "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-               "ip=dhcp\0" \
        "bootenv=uEnv.txt\0" \
        "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
        "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
@@ -163,13 +150,6 @@
                "sf probe ${spibusno}:0; " \
                "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
                "bootz ${loadaddr}\0" \
-       "netboot=echo Booting from network ...; " \
-               "setenv autoload no; " \
-               "dhcp; " \
-               "tftp ${loadaddr} ${bootfile}; " \
-               "tftp ${fdtaddr} ${fdtfile}; " \
-               "run netargs; " \
-               "bootz ${loadaddr} - ${fdtaddr}\0" \
        "ramboot=echo Booting from ramdisk ...; " \
                "run ramargs; " \
                "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
@@ -185,6 +165,7 @@
                "if test $fdtfile = undefined; then " \
                        "echo WARNING: Could not determine device tree to use; fi; \0" \
        NANDARGS \
+       NETARGS \
        DFUARGS
 #endif
 
@@ -241,6 +222,7 @@
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
 /* NAND: driver related configs */
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
@@ -266,7 +248,7 @@
                                        "128k(NAND.u-boot-env)," \
                                        "128k(NAND.u-boot-env.backup1)," \
                                        "8m(NAND.kernel)," \
-                                       "-(NAND.rootfs)"
+                                       "-(NAND.file-system)"
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x000c0000
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_NAND
@@ -301,14 +283,14 @@
  */
 #define CONFIG_USB_MUSB_DSPS
 #define CONFIG_ARCH_MISC_INIT
-#define CONFIG_MUSB_GADGET
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#define CONFIG_USB_MUSB_GADGET
+#define CONFIG_USB_MUSB_PIO_ONLY
+#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW    2
-#define CONFIG_MUSB_HOST
+#define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE        MUSB_PERIPHERAL
 #define CONFIG_AM335X_USB1
@@ -316,22 +298,23 @@
 
 #ifndef CONFIG_SPL_USBETH_SUPPORT
 /* Fastboot */
+#define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
-#define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000
+#define CONFIG_FASTBOOT_BUF_ADDR       CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE       0x07000000
 
 /* To support eMMC booting */
 #define CONFIG_STORAGE_EMMC
 #define CONFIG_FASTBOOT_FLASH_MMC_DEV   1
 #endif
 
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #endif
 
-#ifdef CONFIG_MUSB_GADGET
+#ifdef CONFIG_USB_MUSB_GADGET
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_HOST_ADDR        "de:ad:be:af:00:00"
@@ -340,11 +323,17 @@
 #define CONFIG_G_DNL_VENDOR_NUM 0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM 0xD022
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
-#endif /* CONFIG_MUSB_GADGET */
+#endif /* CONFIG_USB_MUSB_GADGET */
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
+/* Remove other SPL modes. */
+#undef CONFIG_SPL_YMODEM_SUPPORT
+#undef CONFIG_SPL_NAND_SUPPORT
+#undef CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_ENV_IS_NOWHERE
+#undef CONFIG_ENV_IS_IN_NAND
 /* disable host part of MUSB in SPL */
-#undef CONFIG_MUSB_HOST
+#undef CONFIG_USB_MUSB_HOST
 /* disable EFI partitions and partition UUID support */
 #undef CONFIG_PARTITION_UUIDS
 #undef CONFIG_EFI_PARTITION
@@ -356,7 +345,7 @@
 
 /* USB Device Firmware Update support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_CMD_DFU
 #define DFU_ALT_INFO_MMC \
@@ -441,7 +430,6 @@
 
 /* SPI flash. */
 #define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_WINBOND
 #define CONFIG_SF_DEFAULT_SPEED                24000000
 
@@ -464,7 +452,6 @@
  */
 #if defined(CONFIG_NOR)
 #undef CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_FLASH
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_SYS_FLASH_CFI