* (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
* (C) Copyright 2009, DAVE Srl <www.dave.eu>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
#define CONFIG_E300 1 /* E300 Family */
#define CONFIG_MPC512X 1 /* MPC512X family */
#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */
-#define CONFIG_FSL_DIU_LOGO_BMP 1 /* Don't include FSL DIU binary bmp */
+
+#define CONFIG_SYS_TEXT_BASE 0xFFF00000
/* video */
#undef CONFIG_VIDEO
#define CONFIG_SYS_MPC512X_CLKIN 33000000 /* in Hz */
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_IMMR 0x80000000
#define CONFIG_SYS_DDR_SIZE 256 /* MB */
#define CONFIG_SYS_DDR_BASE 0x00000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000
+
+#define CONFIG_SYS_IOCTRL_MUX_DDR 0x00000036
/* DDR Controller Configuration
*
#define CONFIG_SYS_MDDRC_SYS_CFG ( (1 << 31) | /* RST_B */ \
(1 << 30) | /* CKE */ \
(1 << 29) | /* CLK_ON */ \
- (1 << 28) | /* CMD_MODE */ \
+ (0 << 28) | /* CMD_MODE */ \
(4 << 25) | /* DRAM_ROW_SELECT */ \
(3 << 21) | /* DRAM_BANK_SELECT */ \
(0 << 18) | /* SELF_REF_EN */ \
(0 << 0) /* FIFO_UV_EN */ \
)
-#define CONFIG_SYS_MDDRC_SYS_CFG_RUN (CONFIG_SYS_MDDRC_SYS_CFG & ~(1 << 28))
+#define CONFIG_SYS_MDDRC_TIME_CFG0 0x030C3D2E
#define CONFIG_SYS_MDDRC_TIME_CFG1 0x55D81189
#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34790863
-#define CONFIG_SYS_MDDRC_SYS_CFG_EN 0xF0000000
-#define CONFIG_SYS_MDDRC_TIME_CFG0 0x00003D2E
-#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x030C3D2E
-
-#define CONFIG_SYS_MICRON_NOP 0x01380000
-#define CONFIG_SYS_MICRON_PCHG_ALL 0x01100400
+#define CONFIG_SYS_DDRCMD_NOP 0x01380000
+#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400
#define CONFIG_SYS_MICRON_EMR ( (1 << 24) | /* CMD_REQ */ \
(0 << 22) | /* DRAM_CS */ \
(0 << 21) | /* DRAM_RAS */ \
)
#define CONFIG_SYS_MICRON_EMR2 0x01020000
#define CONFIG_SYS_MICRON_EMR3 0x01030000
-#define CONFIG_SYS_MICRON_RFSH 0x01080000
+#define CONFIG_SYS_DDRCMD_RFSH 0x01080000
#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432
#define CONFIG_SYS_MICRON_EMR_OCD ( (1 << 24) | /* CMD_REQ */ \
(0 << 22) | /* DRAM_CS */ \
/*
* Backward compatible definitions,
- * so we do not have to change cpu/mpc512x/fixed_sdram.c
+ * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c
*/
-#define CONFIG_SYS_MICRON_EM2 (CONFIG_SYS_MICRON_EMR2)
-#define CONFIG_SYS_MICRON_EM3 (CONFIG_SYS_MICRON_EMR3)
-#define CONFIG_SYS_MICRON_EN_DLL (CONFIG_SYS_MICRON_EMR)
-#define CONFIG_SYS_MICRON_OCD_DEFAULT (CONFIG_SYS_MICRON_EMR_OCD)
+#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2)
+#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3)
+#define CONFIG_SYS_DDRCMD_EN_DLL (CONFIG_SYS_MICRON_EMR)
+#define CONFIG_SYS_DDRCMD_OCD_DEFAULT (CONFIG_SYS_MICRON_EMR_OCD)
/* DDR Priority Manager Configuration */
#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777
#undef CONFIG_SYS_FLASH_CHECKSUM
+/*
+ * NAND FLASH support
+ * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only)
+ */
+#define CONFIG_CMD_NAND /* enable NAND support */
+#define CONFIG_JFFS2_NAND /* with JFFS2 on it */
+#define CONFIG_NAND_MPC5121_NFC
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+/*
+ * Configuration parameters for MPC5121 NAND driver
+ */
+#define CONFIG_FSL_NFC_WIDTH 1
+#define CONFIG_FSL_NFC_WRITE_SIZE 2048
+#define CONFIG_FSL_NFC_SPARE_SIZE 64
+#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+
#define CONFIG_SYS_SRAM_BASE 0x30000000
#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */
#define CONFIG_SYS_ARIA_SRAM_BASE (CONFIG_SYS_SRAM_BASE + \
CONFIG_SYS_SRAM_SIZE)
#define CONFIG_SYS_ARIA_SRAM_SIZE 0x00100000 /* reserve 1MB-window */
+#define CONFIG_SYS_CS6_START CONFIG_SYS_ARIA_SRAM_BASE
+#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_ARIA_SRAM_SIZE
#define CONFIG_SYS_ARIA_FPGA_BASE (CONFIG_SYS_ARIA_SRAM_BASE + \
CONFIG_SYS_ARIA_SRAM_SIZE)
#define CONFIG_SYS_ARIA_FPGA_SIZE 0x20000 /* 128 KB */
+#define CONFIG_SYS_CS2_START CONFIG_SYS_ARIA_FPGA_BASE
+#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_ARIA_FPGA_SIZE
+
#define CONFIG_SYS_CS0_CFG 0x05059150
#define CONFIG_SYS_CS2_CFG ( (5 << 24) | \
(5 << 16) | \
/* Use SRAM for initial stack */
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE
-#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_SIZE 0x100
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
- CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
#ifdef CONFIG_FSL_DIU_FB
#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024)
* Serial Port
*/
#define CONFIG_CONS_INDEX 1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
/*
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */
+#define CONFIG_SYS_PSC3
#if CONFIG_PSC_CONSOLE != 3
#error CONFIG_PSC_CONSOLE must be 3
#endif
/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif
/*
* PCI
*/
#ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000
#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SPEED 100000
/*
* IIM - IC Identification Module
*/
-#undef CONFIG_IIM
+#undef CONFIG_FSL_IIM
/*
* EEPROM configuration for Atmel AT24C32A-10TQ-2.7:
* Ethernet configuration
*/
#define CONFIG_MPC512x_FEC 1
-#define CONFIG_NET_MULTI
#define CONFIG_PHY_ADDR 0x17
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_FEC_AN_TIMEOUT 1
#undef CONFIG_CMD_FUSE
#define CONFIG_CMD_I2C
#undef CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_PCI
#endif
-#if defined(CONFIG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
#define CONFIG_DOS_PARTITION
#define CONFIG_MAC_PARTITION
#define CONFIG_ISO_PARTITION
#endif /* defined(CONFIG_CMD_IDE) */
+/*
+ * Dynamic MTD partition support
+ */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=f8000000.flash,nand0=mpc5121.nand"
+
+/*
+ * NOR flash layout:
+ *
+ * F8000000 - FEAFFFFF 107 MiB User Data
+ * FEB00000 - FFAFFFFF 16 MiB Root File System
+ * FFB00000 - FFFEFFFF 4 MiB Linux Kernel
+ * FFF00000 - FFFBFFFF 768 KiB U-Boot (up to 512 KiB) and 2 x * env
+ * FFFC0000 - FFFFFFFF 256 KiB Device Tree
+ *
+ * NAND flash layout: one big partition
+ */
+#define MTDPARTS_DEFAULT "mtdparts=f8000000.flash:107m(user)," \
+ "16m(rootfs)," \
+ "4m(kernel)," \
+ "768k(u-boot)," \
+ "256k(dtb);" \
+ "mpc5121.nand:-(data)"
+
/*
* Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
* For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE
/*
* For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
/* Cache Configuration */
#define CONFIG_SYS_DCACHE_SIZE 32768
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01
-#define BOOTFLAG_WARM 0x02
-
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#define CONFIG_TIMESTAMP
#define CONFIG_HOSTNAME aria
-#define CONFIG_BOOTFILE aria/uImage
-#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx
+#define CONFIG_BOOTFILE "aria/uImage"
+#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx"
#define CONFIG_LOADADDR 400000 /* default load addr */
"fdt_addr_r=880000\0" \
"ramdisk_addr_r=900000\0" \
"u-boot_addr=FFF00000\0" \
- "kernel_addr=FFC40000\0" \
- "fdt_addr=FFEC0000\0" \
- "ramdisk_addr=FC040000\0" \
+ "kernel_addr=FFB00000\0" \
+ "fdt_addr=FFFC0000\0" \
+ "ramdisk_addr=FEB00000\0" \
"ramdiskfile=aria/uRamdisk\0" \
"u-boot=aria/u-boot.bin\0" \
"fdtfile=aria/aria.dtb\0" \
#define FSL_ATA_CTRL_DMA_WRITE 0x02000000
#define FSL_ATA_CTRL_IORDY_EN 0x01000000
+/* Clocks in use */
+#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
+ CLOCK_SCCR1_LPC_EN | \
+ CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
+ CLOCK_SCCR1_PSCFIFO_EN | \
+ CLOCK_SCCR1_DDR_EN | \
+ CLOCK_SCCR1_FEC_EN | \
+ CLOCK_SCCR1_NFC_EN | \
+ CLOCK_SCCR1_PATA_EN | \
+ CLOCK_SCCR1_PCI_EN | \
+ CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \
+ CLOCK_SCCR2_SPDIF_EN | \
+ CLOCK_SCCR2_DIU_EN | \
+ CLOCK_SCCR2_I2C_EN)
+
#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / blobdiff