sniper: Pass serial number through ATAG

[karo-tx-uboot.git] / include / configs / bf537-stamp.h

diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 64e86d64ff26f68c04b8086bd8ac6f65d28926bd..f250cdbf0a7c4193b37e95db3ae69e205c97526b 100644 (file)
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -52,7 +52,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL        0x7BB07BB0
 #define CONFIG_EBIU_AMBCTL1_VAL        0xFFC27BB0
 
-#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN          (384 * 1024)
 
 
@@ -63,12 +63,8 @@
 #define ADI_CMDS_NETWORK       1
 #define CONFIG_BFIN_MAC
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                bf537-stamp
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR      02:80:ad:20:31:e8 */
-
 
 /*
  * Flash Settings
@@ -88,11 +84,7 @@
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ  30000000
 #define CONFIG_SF_DEFAULT_SPEED        30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_ALL
 
 
 /*
@@ -122,36 +114,34 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-       arch/blackfin/cpu/traps.o               (.text .text.*); \
-       arch/blackfin/cpu/interrupt.o   (.text .text.*); \
-       arch/blackfin/cpu/serial.o              (.text .text.*); \
-       common/dlmalloc.o               (.text .text.*); \
-       lib/crc32.o             (.text .text.*); \
+       arch/blackfin/lib/built-in.o (.text*); \
+       arch/blackfin/cpu/built-in.o (.text*); \
        . = DEFINED(env_offset) ? env_offset : .; \
-       common/env_embedded.o           (.text .text.*);
+       common/env_embedded.o (.text*);
 #endif
 
 
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C    1
-#define CONFIG_HARD_I2C                1
-#define CONFIG_SYS_I2C_SPEED   50000
-#define CONFIG_SYS_I2C_SLAVE   0
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 
 /*
  * SPI_MMC Settings
  */
+#define CONFIG_MMC_SPI
+#ifdef CONFIG_MMC_SPI
 #define CONFIG_MMC
-#define CONFIG_SPI_MMC
-
+#define CONFIG_GENERIC_MMC
+#endif
 
 /*
  * NAND Settings
  */
 /* #define CONFIG_NAND_PLAT */
+#ifdef CONFIG_NAND_PLAT
 #define CONFIG_SYS_NAND_BASE           0x20212000
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 
@@ -166,7 +156,7 @@
 #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
 #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
 #define NAND_PLAT_GPIO_DEV_READY       GPIO_PF3
-
+#endif /* CONFIG_NAND_PLAT */
 
 /*
  * CF-CARD IDE-HDD Support
@@ -261,22 +251,23 @@
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE    0
 
-/* #define CONFIG_BF537_STAMP_LEDCMD   1 */
-
 /* Define if want to do post memory test */
 #undef CONFIG_POST
 #ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK 11      /* Should > = 11 */
-#define FLASH_END_POST_BLOCK   71      /* Should < = 71 */
+#define CONFIG_SYS_POST_HOTKEYS_GPIO   GPIO_PF5
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+       GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+       GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2,
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+       10, 11, 12, 13,
+#define CONFIG_SYS_POST_FLASH_START    11
+#define CONFIG_SYS_POST_FLASH_END      71
 #endif
 
 /* These are for board tests */
 #if 0
 #define CONFIG_BOOTCOMMAND       "bootldr 0x203f0100"
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT \
-       "autoboot in %d seconds: press space to stop\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR " "
 #endif