Merge branch 'master' of git://git.denx.de/u-boot-mips

[karo-tx-uboot.git] / include / configs / blackstamp.h

diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index f61e5b7f9cea5b3beb88f1dc34ac271d73ed8720..7d8227503a8f11a417aa0af70b481d3f15e3921d 100644 (file)
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -8,7 +8,7 @@
 #ifndef __CONFIG_BLACKSTAMP_H__
 #define __CONFIG_BLACKSTAMP_H__
 
-#include <asm/blackfin-config-pre.h>
+#include <asm/config-pre.h>
 
 /*
  * Debugging: Set these options if you're having problems
@@ -30,7 +30,7 @@
 /*
  * Board settings
  */
-#define CONFIG_DRIVER_SMC91111 1
+#define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20300300
 
 /* FLASH/ETHERNET uses the same address range
@@ -40,7 +40,6 @@
 #define SHARED_RESOURCES       1
 
 /* Is I2C bit-banged? */
-#undef CONFIG_SOFT_I2
 
 /*
  * Clock Settings
@@ -69,13 +68,13 @@
  * Network settings
  */
 
-#ifdef CONFIG_DRIVER_SMC91111
+#ifdef CONFIG_SMC91111
 #define CONFIG_IPADDR          192.168.0.15
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_GATEWAYIP       192.168.0.1
 #define CONFIG_SERVERIP                192.168.0.2
 #define CONFIG_HOSTNAME                blackstamp
-#define CONFIG_ROOTPATH                /checkout/uClinux-dist/romfs
+#define CONFIG_ROOTPATH                "/checkout/uClinux-dist/romfs"
 #define CONFIG_SYS_AUTOLOAD            "no"
 
 /* To remove hardcoding and enable MAC storage in EEPROM  */
@@ -83,10 +82,9 @@
 #endif
 
 #define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET      0x4000
+#define CONFIG_ENV_OFFSET      0x40000
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x40000
-#define ENV_IS_EMBEDDED_CUSTOM
 
 /*
  * SDRAM settings & memory map
@@ -109,14 +107,14 @@
 
 #include <config_cmd_default.h>
 
-#ifdef CONFIG_DRIVER_SMC91111
+#ifdef CONFIG_SMC91111
 # define CONFIG_CMD_DHCP
 # define CONFIG_CMD_PING
 #else
 # undef CONFIG_CMD_NET
 #endif
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 # define CONFIG_CMD_I2C
 #endif
 
@@ -131,12 +129,12 @@
 #define CONFIG_BOOTCOMMAND   "run ramboot"
 #define CONFIG_BOOTARGS \
        "root=/dev/mtdblock0 rw " \
-       "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
+       "clkin_hz=" __stringify(CONFIG_CLKIN_HZ) " " \
        "earlyprintk=" \
                "serial," \
-               "uart" MK_STR(CONFIG_UART_CONSOLE) "," \
-               MK_STR(CONFIG_BAUDRATE) " " \
-       "console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
+               "uart" __stringify(CONFIG_UART_CONSOLE) "," \
+               __stringify(CONFIG_BAUDRATE) " " \
+       "console=ttyBF0," __stringify(CONFIG_BAUDRATE)
 
 #if defined(CONFIG_CMD_NET)
 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
@@ -150,7 +148,7 @@
                "eeprom write $(loadaddr) 0x0 $(filesize)"
 #  else
 #   define UBOOT_ENV_UPDATE \
-               "sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
+               "sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
                "sf erase 0 0x40000;" \
                "sf write $(loadaddr) 0 $(filesize)"
 #  endif
@@ -205,35 +203,11 @@
  * Note these pins are arbitrarily chosen because we aren't using
  * them yet. You can (and probably should) change these values!
  */
-#ifdef CONFIG_SOFT_I2C
-
-#define PF_SCL                 PF9
-#define PF_SDA                 PF8
-
-#define I2C_INIT       do { *pFIO_DIR |= PF_SCL; SSYNC(); } while (0)
-#define I2C_ACTIVE     do { *pFIO_DIR |= PF_SDA; *pFIO_INEN &= ~PF_SDA; SSYNC(); } while (0)
-#define I2C_TRISTATE   do { *pFIO_DIR &= ~PF_SDA; *pFIO_INEN |= PF_SDA; SSYNC(); } while (0)
-#define I2C_READ       ((*pFIO_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-       do { \
-               if (bit) \
-                       *pFIO_FLAG_S = PF_SDA; \
-               else \
-                       *pFIO_FLAG_C = PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_SCL(bit) \
-       do { \
-               if (bit) \
-                       *pFIO_FLAG_S = PF_SCL; \
-               else \
-                       *pFIO_FLAG_C = PF_SCL; \
-               SSYNC(); \
-       } while (0)
-#define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_SPEED           50000
-#define CONFIG_SYS_I2C_SLAVE           0xFE
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
+#define CONFIG_SYS_SOFT_I2C_SPEED      50000
+#define CONFIG_SYS_SOFT_I2C_SLAVE      0xFE
 #endif
 
 /*
@@ -245,9 +219,9 @@
  * Serial Flash Infomation
  */
 #define CONFIG_BFIN_SPI
-/* For the M25P64 SCK Should be Kept < 20Mhz */
-#define CONFIG_ENV_SPI_MAX_HZ  20000000
-#define CONFIG_SF_DEFAULT_HZ   20000000
+/* For the M25P64 SCK Should be Kept < 15Mhz */
+#define CONFIG_ENV_SPI_MAX_HZ  15000000
+#define CONFIG_SF_DEFAULT_SPEED        15000000
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 
@@ -270,6 +244,4 @@
 #undef CONFIG_CMD_JFFS2
 #undef CONFIG_CMD_FLASH
 
-#include <asm/blackfin-config-post.h>
-
 #endif