arm/rpi: Enable dcache

[karo-tx-uboot.git] / include / configs / cardhu.h

diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index 1616b397789b48cd3357290dee80f9403b6d363b..93c5f482720c9fade5b98bf0100e157c810487e5 100644 (file)
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -17,42 +17,46 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 
 #include "tegra30-common.h"
 
-/* Enable fdt support for Cardhu. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE     tegra30-cardhu
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
+/* VDD core PMIC */
+#define CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3
 
 /* High-level configuration options */
 #define V_PROMPT               "Tegra30 (Cardhu) # "
 #define CONFIG_TEGRA_BOARD_STRING      "NVIDIA Cardhu"
 
+#define BOARD_EXTRA_ENV_SETTINGS \
+       "board_name=cardhu-a04\0" \
+       "fdtfile=tegra30-cardhu-a04.dtb\0"
+
 /* Board-specific serial config */
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1                NV_PA_APB_UARTA_BASE
 
 #define CONFIG_MACH_TYPE               MACH_TYPE_CARDHU
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* I2C */
-#define CONFIG_TEGRA_I2C
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS         TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_SYS_I2C_TEGRA
 #define CONFIG_CMD_I2C
 
-#define CONFIG_ENV_IS_NOWHERE
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET              (-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#define CONFIG_SYS_MMC_ENV_PART                2
 
 /* SPI */
-#define CONFIG_TEGRA_SLINK
+#define CONFIG_TEGRA20_SLINK
 #define CONFIG_TEGRA_SLINK_CTRLS       6
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_WINBOND
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED        24000000
@@ -60,6 +64,29 @@
 #define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH_SIZE          (4 << 20)
 
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* PCI host support */
+#define CONFIG_PCI
+#define CONFIG_PCI_TEGRA
+#define CONFIG_PCI_PNP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
+
+/* PCI networking support */
+#define CONFIG_RTL8169
+
+/* General networking support */
+#define CONFIG_CMD_DHCP
+
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */