arm/rpi: Enable dcache

[karo-tx-uboot.git] / include / configs / cm_t3517.h

diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h
index 046649db975989c9860fc71ceb978d11d109a71d..cf0841499bfec320c12cad26614836ae6876fef1 100644 (file)
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -17,6 +17,10 @@
 #define CONFIG_CM_T3517        /* working with CM-T3517 */
 #define CONFIG_OMAP_COMMON
 #define CONFIG_SYS_GENERIC_BOARD
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SYS_TEXT_BASE   0x80008000
 
@@ -30,7 +34,7 @@
 #define CONFIG_EMIF4   /* The chip has EMIF4 controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
@@ -108,16 +112,14 @@
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
 #else /* !CONFIG_USB_MUSB_AM35X */
-#define CONFIG_MUSB_HOST
-#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_USB_MUSB_HOST
+#define CONFIG_USB_MUSB_PIO_ONLY
 #endif /* CONFIG_USB_MUSB_AM35X */
 
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_USB
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
@@ -132,11 +134,10 @@
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
 #define CONFIG_CMD_MMC         /* MMC support                  */
 #define CONFIG_CMD_NAND                /* NAND support                 */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
 #define CONFIG_CMD_GPIO
 
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -267,6 +268,15 @@
 #define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_MII
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE    (0x2C000000 + (16 << 20))
+#endif /* CONFIG_CMD_NET */
+
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
@@ -291,4 +301,19 @@
 #define CONFIG_OMAP3_GPIO_6    /* GPIO186 is in GPIO bank 6  */
 #endif
 
+/* Display Configuration */
+#define CONFIG_OMAP3_GPIO_2
+#define CONFIG_OMAP3_GPIO_5
+#define CONFIG_VIDEO_OMAP3
+#define LCD_BPP                LCD_COLOR16
+
+#define CONFIG_LCD
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASHIMAGE_GUARD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_SCF0403_LCD
+
+#define CONFIG_OMAP3_SPI
+
 #endif /* __CONFIG_H */