karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / configs / cobra5272.h

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 1c3ea23c777fa72550d091dd31fb8c7e6379c920..8e70d8c94c3d40c056424e6c5eb0d14e5500b2dc 100644 (file)
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -3,23 +3,7 @@
  *
  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /* ---
@@ -40,24 +24,12 @@
 #ifndef _CONFIG_COBRA5272_H
 #define _CONFIG_COBRA5272_H
 
-/* ---
- * Define processor
- * possible values for Sentec board: only Coldfire M5272 processor supported
- * (please do not change)
- * ---
- */
-
-#define CONFIG_MCF52x2                 /* define processor family */
-#define CONFIG_M5272                   /* define processor type */
-
 /* ---
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  * ---
  */
 
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CLK                 66000000
 #define CONFIG_SYS_SDRAM_SIZE          16              /* SDRAM size in MB */
 
@@ -81,7 +53,6 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 #define CONFIG_BAUDRATE                19200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
 
 /* ---
  * set "#if 0" to "#if 1" if (Hardware)-WATCHDOG should be enabled & change
@@ -107,7 +78,7 @@
  *
  * Setting #if 0: u-boot will start from flash and relocate itself to RAM
  *
- * Please do not forget to modify the setting of TEXT_BASE
+ * Please do not forget to modify the setting of CONFIG_SYS_TEXT_BASE
  * in board/cobra5272/config.mk accordingly (#if 0: 0xffe00000; #if 1: 0x20000)
  *
  * ---
@@ -133,6 +104,9 @@
 #define CONFIG_ENV_IS_IN_FLASH 1
 #endif
 
+#define LDS_BOARD_TEXT \
+        . = DEFINED(env_offset) ? env_offset : .; \
+        common/env_embedded.o (.text);
 
 /*
  * BOOTP options
@@ -146,16 +120,11 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADB
 #undef CONFIG_CMD_MII
 
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
@@ -204,14 +173,11 @@ considered during boot */
 
 /* User network settings */
 
-#define CONFIG_ETHADDR 00:00:00:00:00:09       /* default ethernet MAC addr. */
 #define CONFIG_IPADDR 192.168.100.2            /* default board IP address */
 #define CONFIG_SERVERIP 192.168.100.1  /* default tftp server IP address */
 
 #endif
 
-#define CONFIG_SYS_PROMPT              "COBRA > "      /* Layout of u-boot prompt*/
-
 #define CONFIG_SYS_LOAD_ADDR           0x20000         /*Defines default RAM address
 from which user programs will be started */
 
@@ -276,9 +242,8 @@ from which user programs will be started */
  * Definitions for initial stack pointer and data area (in internal SRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
-#define CONFIG_SYS_INIT_RAM_END        0x1000  /* End of used area in internal SRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       64      /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000  /* Size of used area in internal SRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -331,6 +296,19 @@ from which user programs will be started */
  */
 #define CONFIG_SYS_CACHELINE_SIZE      16
 
+#define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - 4)
+#define CONFIG_SYS_ICACHE_INV          (CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0          (CONFIG_SYS_SDRAM_BASE | \
+                                        CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+                                        CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR         (CF_CACR_CENB | CF_CACR_CINV | \
+                                        CF_CACR_DISD | CF_CACR_INVI | \
+                                        CF_CACR_CEIB | CF_CACR_DCM | \
+                                        CF_CACR_EUSP)
+
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  *