Unified codebase for TX28, TX48, TX51, TX53

[karo-tx-uboot.git] / include / configs / da830evm.h

diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 160ece2bf9cf8d20097d38178ea6e4aea98e80e6..781878ef399af8ad3917329b2a848a491bd075eb 100644 (file)
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -28,6 +28,7 @@
  * Board
  */
 #define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_USE_SPIFLASH
 
 /*
  * SoC Configuration
@@ -41,17 +42,16 @@
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ                  1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
+#define CONFIG_SYS_TEXT_BASE           0xc1080000
 
 /*
  * Memory Info
  */
 #define CONFIG_SYS_MALLOC_LEN  (0x10000 + 1*1024*1024) /* malloc() len */
-#define CONFIG_SYS_GBL_DATA_SIZE       128 /* reserved for initial data */
-#define PHYS_SDRAM_1           DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
-#define PHYS_SDRAM_1_SIZE      (64 << 20) /* SDRAM size 64MB */
-#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_1 /* memtest start addr */
-#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1 + 16*1024*1024) /* 16MB test */
+#define PHYS_SDRAM_1                   0xc0000000 /* SDRAM Start */
+#define CONFIG_SYS_MEMTEST_START       (PHYS_SDRAM_1 + 0x2000000)
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
+                                               (32 << 20))
 #define CONFIG_NR_DRAM_BANKS   1 /* we have 1 bank of DRAM */
 #define CONFIG_STACKSIZE       (256*1024) /* regular stack */
 
@@ -87,14 +87,12 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM       1
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 #endif
 
 /*
@@ -106,17 +104,16 @@
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_OFFSET              (512 << 10)
-#define CONFIG_ENV_SIZE                        (512 << 10)
+#define CONFIG_ENV_SIZE                        (10 << 10) /* 10KB */
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+#define CONFIG_SYS_NAND_PAGE_2K
 #define CONFIG_SYS_NAND_CS             3
 #define CONFIG_SYS_NAND_BASE           DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 #define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 #define CONFIG_SYS_CLE_MASK            0x10
 #define CONFIG_SYS_ALE_MASK            0x8
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS                 1
-#define DEF_BOOTM                      ""
 #endif
 
 #ifdef CONFIG_USE_NOR
@@ -148,8 +145,8 @@
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_BASE            DAVINCI_SPI0_BASE
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI0_CLKID)
-#define CONFIG_SF_DEFAULT_SPEED                50000000
-#define CONFIG_SYS_ENV_SPI_MAX_HZ      CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SF_DEFAULT_SPEED                30000000
+#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 #endif
 
 /*
@@ -165,12 +162,12 @@
 #undef CONFIG_MISC_INIT_R
 #undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT      "DA830-evm > " /* Command Prompt */
+#define CONFIG_SYS_PROMPT      "U-Boot > " /* Command Prompt */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS     16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_MEMTEST_START + 0x700000)
+#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE   /* Won't work with hush so far, may be later */
 #define CONFIG_SYS_HUSH_PARSER
@@ -183,7 +180,7 @@
 /*
  * Linux Information
  */
-#define LINUX_BOOT_PARAM_ADDR  (CONFIG_SYS_MEMTEST_START + 0x100)
+#define LINUX_BOOT_PARAM_ADDR  (PHYS_SDRAM_1 + 0x100)
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTARGS                "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp"
@@ -204,7 +201,10 @@
 #define CONFIG_CMD_MEMORY
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_EEPROM
+
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
+#endif
 
 #ifndef CONFIG_DRIVER_TI_EMAC
 #undef CONFIG_CMD_NET
@@ -226,6 +226,7 @@
 #undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_FLASH
 #define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
 #define CONFIG_CMD_SAVEENV
 #endif
 
@@ -281,4 +282,11 @@
        "mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST
 #endif
 
+#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
+
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR                \
+       (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */