Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

[karo-tx-uboot.git] / include / configs / davinci_dm6467evm.h

diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index 6b5d8656b688220ee414e361e51ea54799697af3..b1b18ad04127463a2886f5d9a2df9f4f263a0dce 100644 (file)
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -1,20 +1,7 @@
 /*
  * Copyright (C) 2009 Texas Instruments Incorporated
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -22,15 +9,24 @@
 
 /* Spectrum Digital TMS320DM6467 EVM board */
 #define DAVINCI_DM6467EVM
+#define CONFIG_SYS_USE_NAND
+#define CONFIG_SYS_NAND_SMALLPAGE
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /* SoC Configuration */
 #define CONFIG_ARM926EJS                               /* arm926ejs CPU */
+
+/* Clock rates detection */
+#ifndef __ASSEMBLY__
+extern unsigned int davinci_arm_clk_get(void);
+#endif
+
+/* Arm Clock frequency    */
+#define CONFIG_SYS_CLK_FREQ    davinci_arm_clk_get()
+/* Timer Input clock freq */
+#define CONFIG_SYS_HZ_CLOCK            (CONFIG_SYS_CLK_FREQ/2)
 #define CONFIG_SYS_TIMERBASE           0x01c21400      /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK            27000000
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SOC_DM646X
 
 /* EEPROM definitions for EEPROM */
@@ -44,7 +40,6 @@
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x81000000      /* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_STACKSIZE               (256 << 10)     /* 256 KiB */
 #define PHYS_SDRAM_1                   0x80000000      /* DDR Start */
 #define PHYS_SDRAM_1_SIZE              (256 << 20)     /* DDR size 256MB */
 
@@ -53,6 +48,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_SYS_BARGSIZE            1024            /* Bootarg Size */
 #define CONFIG_SYS_LOAD_ADDR           0x80700000      /* kernel address */
+#define CONFIG_REVISION_TAG
 
 /* Serial Driver info */
 #define CONFIG_SYS_NS16550
@@ -62,18 +58,28 @@
 #define CONFIG_SYS_NS16550_CLK         24000000
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /* I2C Configuration */
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_DAVINCI_I2C
-#define CONFIG_SYS_I2C_SPEED           80000
-#define CONFIG_SYS_I2C_SLAVE           10
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DAVINCI
+#define CONFIG_SYS_DAVINCI_I2C_SPEED           80000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE           10
+
+/* Network & Ethernet Configuration */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_CMD_NET
 
 /* Flash & Environment */
 #define CONFIG_SYS_NO_FLASH
 #ifdef CONFIG_SYS_USE_NAND
 #define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_MASK_CLE       0x80000
+#define CONFIG_SYS_NAND_MASK_ALE       0x40000
 #define CONFIG_SYS_NAND_CS             2
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_IS_IN_NAND
@@ -88,7 +94,6 @@
 #endif
 
 /* U-Boot general configuration */
-#undef CONFIG_USE_IRQ                          /* No IRQ/FIQ in U-Boot */
 #define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTFILE                "uImage"        /* Boot file name */
 #define CONFIG_SYS_PROMPT      "DM6467 EVM > " /* Monitor Command Prompt */
@@ -99,7 +104,6 @@
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
@@ -117,7 +121,8 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
 #undef CONFIG_CMD_BDI
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
@@ -127,4 +132,16 @@
 #define CONFIG_CMD_NAND
 #endif
 
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
+#endif
+
+#define CONFIG_MAX_RAM_BANK_SIZE       (256 << 20)     /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */