Move defaults from config_cmd_default.h to Kconfig

[karo-tx-uboot.git] / include / configs / dlvision-10g.h

diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 17391cddc988529c2f1314125f61a443a4ea45b9..e6bfe58e98dfbf2755fd685c075c01dd445bc764 100644 (file)
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -2,14 +2,13 @@
  * (C) Copyright 2010
  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #define CONFIG_405EP           1       /* this is a PPC405 CPU */
-#define CONFIG_4xx             1       /*  member of PPC4xx family */
 #define CONFIG_DLVISION_10G    1       /*  on a DLVision-10G board */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
@@ -18,19 +17,18 @@
  * Include common defines/options for all AMCC eval boards
  */
 #define CONFIG_HOSTNAME                dlvsion-10g
-#define CONFIG_IDENT_STRING    " dlvision-10g 0.03"
+#define CONFIG_IDENT_STRING    " dlvision-10g 0.06"
 #include "amcc-common.h"
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT
+#define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_SYS_CLK_FREQ    33333333 /* external frequency to pll   */
 
 #undef CONFIG_ZERO_BOOTDELAY_CHECK     /* ignore keypress on bootdelay==0 */
-#define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
-#define CONFIG_AUTOBOOT_STOP_STR " "
 
 /*
  * Configure PLL
@@ -41,6 +39,7 @@
 /* new uImage format support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
 
 #define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
 
@@ -65,9 +64,13 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DTT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
 #undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
 
 /*
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
@@ -98,9 +101,23 @@
 /*
  * I2C stuff
  */
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0          100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
+
+#define CONFIG_SYS_I2C_IHS
+#define CONFIG_SYS_I2C_IHS_CH0
+#define CONFIG_SYS_I2C_IHS_SPEED_0             50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0             0x7F
+#define CONFIG_SYS_I2C_IHS_CH1
+#define CONFIG_SYS_I2C_IHS_SPEED_1             50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1             0x7F
+
+#define CONFIG_SYS_SPD_BUS_NUM         2
 
 /* Temp sensor/hwmon/dtt */
+#define CONFIG_SYS_DTT_BUS_NUM 2
 #define CONFIG_DTT_LM63                1       /* National LM63        */
 #define CONFIG_DTT_SENSORS     { 0x4c, 0x4e, 0x18 } /* Sensor addresses */
 #define CONFIG_DTT_PWM_LOOKUPTABLE     \
@@ -108,6 +125,9 @@
                  { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
 #define CONFIG_DTT_TACH_LIMIT  0xa10
 
+#define CONFIG_SYS_ICS8N3QV01_I2C      {0, 1}
+#define CONFIG_SYS_SIL1178_I2C         {0, 1}
+
 /* EBC peripherals */
 
 #define CONFIG_SYS_FLASH_BASE          0xFC000000
@@ -123,9 +143,15 @@
 
 #define CONFIG_SYS_FPGA_COUNT          2
 
+#define CONFIG_SYS_FPGA_PTR { \
+       (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \
+       (struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE }
+
+#define CONFIG_SYS_FPGA_COMMON
+
 #define CONFIG_SYS_LATCH0_RESET                0xffff
 #define CONFIG_SYS_LATCH0_BOOT         0xffff
-#define CONFIG_SYS_LATCH1_RESET                0xffcf
+#define CONFIG_SYS_LATCH1_RESET                0xffbf
 #define CONFIG_SYS_LATCH1_BOOT         0xffff
 
 #define CONFIG_SYS_FPGA_NO_RFL_HI
@@ -145,7 +171,6 @@
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write/ms */
 
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1    /* use buff'd writes */
-#define CONFIG_SYS_FLASH_PROTECTION    1       /* use hardware flash protect */
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO    /* 'E' for empty sector on flinfo */
 #define CONFIG_SYS_FLASH_QUIET_TEST    1       /* no warn upon unknown flash */
@@ -213,9 +238,8 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
 #define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128  /* size/bytes res'd for init data*/
 #define CONFIG_SYS_GBL_DATA_OFFSET \
-       (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+       (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -303,9 +327,7 @@
 /*
  * OSD Setup
  */
-#define CONFIG_SYS_ICS8N3QV01
 #define CONFIG_SYS_MPC92469AC
-#define CONFIG_SYS_SIL1178
 #define CONFIG_SYS_OSD_SCREENS         CONFIG_SYS_FPGA_COUNT
 
 #endif /* __CONFIG_H */